1 / 12

dynamic aperture optimization work for the CLIC DR

dynamic aperture optimization work for the CLIC DR. Mauro Pivi, CERN/SLAC June 27, 2012 CLIC DR collaboration meeting. TME cell phase advance – identity transformation. Goal: set the phase advance of the TME cells to cancel high order multi-poles and increase dynamic aperture [1]

vinson
Download Presentation

dynamic aperture optimization work for the CLIC DR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. dynamic aperture optimization work for the CLIC DR Mauro Pivi, CERN/SLAC June 27, 2012 CLIC DR collaboration meeting

  2. TME cell phase advance – identity transformation • Goal: set the phase advance of the TME cells to cancel high order multi-poles and increase dynamic aperture [1] Procedure: • Set the Vertical phase advance in the arc TME cell to obtain an identity transformation (phase adavanceis an integer number) every N cells • Re-match the phase advance of FODO cell in the straights to re-obtain the nominal global tunes • Correct chromaticity [1] PEP-X report, SLAC-PUB-14785 27 June, 2012 CLIC DR coll. meeting Mauro Pivi, CERN/SLAC

  3. TME cell phase advance – identity transformation use, fodo !! Mauro jun 2012 ************** cell vary, kqdw , step=1.e-5, upper=11, lower=-11 vary, kqfw , step=1.e-5, upper=11, lower=-11 constr,#e, mux = 0.256647 , muy = 0.098547 ! original: mux = 0.256, muy = 0.105500 lmdif,calls=2000,tolerance=1.0e-8 endmatch • MAD main steps: use, tme cell vary, kqf1 , step=1.e-5, upper=11, lower=-11 vary, kqf2 , step=1.e-5, upper=11, lower=-11 constr,#e, mux=0.37500 muy=0.0833333 ! original: mux = 0.4080, muy = 0.0500, lmdif endmatch use, ring ! mauro: commented this below harmon hvary, ks2x2, step=0.01 hvary, ks2y1, step=0.01 htune, qx'=0.0, qy'=0 hchromaticity endharm 27 June, 2012 CLIC DR coll. meeting Mauro Pivi, CERN/SLAC

  4. Optics FODOcell TME cell 27 June, 2012 CLIC DR coll. meeting Mauro Pivi, CERN/SLAC

  5. Phase advance space • “Nominal” TME cell phase advances: mux = 0.408, muy = 0.05 mux varied: 0.333333 0.34375 0.375 0.40625 0.416667 0.4375 0.46875 0.5 muy varied: 0.03125 0.0416667 0.0625 0.0833333 (0.09375) 0.125 96 TME cells, mu=1/96/i Index: i, 96/i, 1/96/i mux muy

  6. Identity transformation of vertical phase advance every N - TME cells Examples: • “CLIC DR - mux=0.375, muy=0.0625” • “CLIC DR - mux=0.38541, muy=0.0625” nominal mod ph.adv dp=0.0 dp=0.01 nominal mod ph.adv dp=0.0 dp=0.01 27 June, 2012 CLIC DR coll. meeting Mauro Pivi, CERN/SLAC

  7. Identity transformation of vertical phase advance every N- TME cells • Probably best case so far: mux=0.375 muy=0.083333 (multiple 2p) nominal mod ph.adv Off momentum dynamic aperture, dp=1% On momentum dynamic aperture, dp=0% Dynamic aperture increase for on- and off-momentum particles. The beam sizes are also shown.

  8. CLIC DR: set phase advance per TME cell • “Nominal” TME cell phase advance was: mux= 0.408, muy = 0.05 • Then set TME cell phase advance to mux=0.375 muy=0.0833 (identity transformation every 12 TME cells) • Nominal working point nx=48.349, ny=10.394. • Beam size relevant for dynamic aperture: sx=297mm, sx=38mm • Used optics .seq posted at: https://twiki.cern.ch/twiki/bin/view/CLIC/DampingRings • In this particular case, Horizemittanceincreases 8-9% 27 June, 2012 CLIC DR coll. meeting Mauro Pivi, CERN/SLAC

  9. Phase advance considerations: analytical parameterization of TME cell Keeping the phase advances μx,y/2*p< 0.5 assures that chromaticitiesare kept to low enough values (by Fanouria Antoniou) Detuning Factor (top) and horizontal (bottom, left) and vertical (bot- tom, right) chromaticities as a function of the horizontal and vertical phase advances.

  10. General treatment - Perturbation of sextupoles • Following [1], based on the Lie Algebra method, the transfer map M of the beam-line can be decomposed in where A-1 is linear symplectic to transform into normalized coordinates and R is rotational map with phase advances as angles. In particular f3 and f4 depends on the sextupolestrenghtS and: where yX,yy are phase advances from last sextupole to end of beam line (an achromat in PEP-X) [1] PEP-X report, SLAC-PUB-14785 27 June, 2012 CLIC DR coll. meeting Mauro Pivi, CERN/SLAC

  11. Summary and future plans for the CLIC DR • Initial work: increased dynamic aperture with identity transformation of phase advance every N - TME cells • Systematic studies are needed to evaluate best phase advance per cell to improve dynamic aperture • Optimize working points • Frequency map analysis • Space charge effect: need to scan the dynamic aperture vs space charge tune shift to account for Dn~0.1 • In addition, apply more standard techniques: increase number of sextupole families, include harmonic sextupoles, cell symmetry 27 June, 2012 CLIC DR coll. meeting Mauro Pivi, CERN/SLAC

  12. Thanks to M.H. Wang (SLAC), Fanouriaand Yannis 27 June, 2012 CLIC DR coll. meeting Mauro Pivi, CERN/SLAC

More Related