1 / 23

Fractal Art

Fractal Art. What is Fractal Art?. A fractal is a geometric shape that has self similarity, that is it can be split into pieces that are approximate reduced copies of the whole shape. Supplies Needed: Graph paper Ruler Coloured pencils. Make a Fractal Tree. Trees. Fractal Trees.

veata
Download Presentation

Fractal Art

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Fractal Art

  2. What is Fractal Art? • A fractal is a geometric shape that has self similarity, that is it can be split into pieces that are approximate reduced copies of the whole shape.

  3. Supplies Needed: Graph paper Ruler Coloured pencils Make a Fractal Tree

  4. Trees

  5. Fractal Trees

  6. Draw your own fractal tree • Begin by drawing a straight line vertically on your page. (this will be your trunk) • Add two branches to your trunk that form a v (they should be about 1/3 the size of your trunk) • Off each of those branches make another v 1/3 the size of the last branch • Repeat the pattern

  7. Koch Snowflake • Create a koch snowflake electronically @ http://math.rice.edu/~lanius/frac/koch/koch.html

  8. Let’s make a Koch Snowflake • Draw an equilateral triangle in the middle of your page (all sides are equal length) • Draw another equilateral triangle opposite to it. Erase the lines to make it appear star like. • Make all the smaller triangles into stars and continue.

  9. Using Technology to Make Fractal Art • Begin with the Fractal genereator @ http://www.coolmath4kids.com/fractals/index.html • will be using Stephen Ferguson's "Tiera-Zon" throughout this tutorial. You can download this program now by clicking here! (Note: This is a zipped file, so click open, then click on the tierazon icon, go extract all, next, save to your folder, next, finish, then click on the icon where you saved it) This should also be now saved to our 5K and 5B folders so you can just click on the Tierazon icon in our folder.

  10. Step 1 • 1) This is the opening screen with the basic Mandelbrot image. Pretty plain eh? However, you are going to see an amazing transformation of this basic image, like an unattractive caterpillar transforming into a beautiful butterfly! • 2) On the program toolbar select "Draw", then move your cursor down & click on fractal equation "109". The draw menu contains built in formulas for various types of fractals. Click on several to see the different types, and then return to 109 before proceeding.

  11. 3) After selectin the 109 equation you should now see the first transformation of the basic image. As you can see, the form is totally different. Now let's move to enhancing this image. Select "Color-1" then click on #20. 4) You now have added your first color variation to your image. Notice the number of color schemes available under "Color-1 & Color-2" on the toolbar.These are just starting points & you will be able to customize these even further! Which takes us to the next step! Step 2

  12. 1) There are a couple of ways to select the color controls. The easiest is to click your right mouse button directly over the fractal image, and select "color controls". Alternatively, you can select them from programs' left toolbar, and select "C". Step 3

  13. ) You will now see a control panel for adjusting the color even further. Change the individual boxes to match the numbers in the image below and hit "Apply". You can also move the "sliders" to adjust numbers on the right side of this window and see the results instantly on your image. Another option is to select Cycle which will automatically cycle through combinations of color. Hit cycle again to stop. Step 4

  14. Before we proceed, let's examine another feature of this program, changing the size of the image. 4) Right click your mouse on the fractal and select XY size. You will then see this window pop up. This will set the width and height of the fractal.Select custom tab, then enter in 120 for both the X & Y dimensions. Click OK or enter on your keyboard. The X dimension changes the horizontal size of the image, Y changes the vertical size of the image. The dimensions we Note: I am demonstrating these commands using the "RIGHT" click feature of your mouse, but all these commands are also available from the left toolbar in Tiera-zon. The "XY" button in this case. Step 5

  15. Deep Zooms • We now come to one of the key features of fractal exploration, zooming! We can either zoom into the image, or out! This amazing feature of fractals is infinite in nature. In other words, you can zoom into the mandelbrot image to infinity! Let's explore his feature in these next steps. 1) First we will zoom in on the image.Holding down your left mouse button, draw a square to match what you see in this image. If the square is not where you want it to be, maybe off center a bit, you can left click inside the square & holding the mouse button down, drag the square where ever you would like it.Once you have selected the part of the image that you wish to zoom in on, either click on the magnifying icon on the side toolbar, or hit enter on the keyboard.

  16. Filters & Julia mode. Time to change the image again! There are many, many "filters" to experiment with in this program. For now, select "Filter-3, 03 "Moving Average 1" from the toolbar, and allow the new image to be drawn. This is a good time to show you how to save an image. Right click over the image, and then select "Save As" from the menu that pops up. Name the file, and choose save. Now if you make changes and are unhappy, you can go back and open this stage of the image. Do this frequently, or you will lose your images forever! Name each file differently every time you save an image, and you will then have copies of every step.

  17. You can Finish Here and Go on to end Project by Clicking “End Project” or Continue

  18. Let's move on. Holding your left mouse button down, draw another square to match the image, and then select "Julia" mode icon on the side toolbar. (Orange icon). Julia mode can only be used once on an image until it is re-drawn using one of the draw parameters, or the unique editor, which we'll cover later. You can still change other parameters such as color, filters etc. as well as zooming in or out. It will also create a totally different image, depending on what part of the image you select to zoom in on. I have written an entire tutorial dealing with this feature & would recommend going through that tutorial once you are comfortable with all of the basic features that I cover

  19. Note: This is where your result may look different than mine, this depends entirely on where you draw your square over the image. Even a slight change, up, down, right, or left, will produce a different result.Don't worry if it is not exact, remember, the purpose of this tutorial is not to reproduce this image, but to teach you how to use the program, and how these functions can change & modify the image.Remember what we started with a few steps back? Quite different already! Let's move on!

  20. In the new Parameter box fill in the fields to match the ones in this image and select OK. Make sure the numbers are EXACT, especially decimal points, slight variations can make a huge difference!Here are the numbers so that you can copy and paste directly into the input boxes.Julia X: 1.64281064058502Julia Y: 0.097806174204001 1) Right click directly over the image & then select "Fractal Parameters" from the pop up menu Changing Fractal Parameters

  21. One key factor is the Bailout setting. Often, like the image we started with on this page, the fractal is basically a circle with detail within the circle, and black out side the circle. To extend the detail outward from the center, increase the bailout setting. Change this to 25 and this is the result. The fractal is very different from the previous image, and you now have another tool under your belt to change the fractal!Try changing that number to whatever you wish, and observe the changes. You can set this up to a parameter range of 999999999. Change the bailout setting back to 4 before proceeding. Stopped at page 9 of 15 of notes

  22. Create this shape with all lines being the same length Trace onto tracing paper. Rotate on point 4, 90 degrees clockwise Create the Dragon

  23. Should look like this Now get your tracing paper and rotate on point 5, 90 degrees

More Related