1 / 30

1 st ANL LCLS All Hands Meeting

1 st ANL LCLS All Hands Meeting. 20 February, 2006. Purpose. Remind you what the project is all about. Bring you up to date on the overall project status. Define clearly what ANL/APS is to deliver.

vea
Download Presentation

1 st ANL LCLS All Hands Meeting

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 1st ANL LCLS All Hands Meeting 20 February, 2006

  2. Purpose • Remind you what the project is all about. • Bring you up to date on the overall project status. • Define clearly what ANL/APS is to deliver. • Bring you up to date on the details of where we are at with the delivery of the LCLS undulator system. • Where possible explain the transition from ANL to SLAC. • Give some look ahead about what we need to accomplish in the coming couple of years. • Explain where required how we are managing this.

  3. The World’s First Hard X-ray Laser

  4. t= t=0 Aluminum plasma classical plasma G =1 G =10 dense plasma G =100 high density matter 1 - 4 - 2 2 4 10 10 10 10 Density (g/cm-3) Femtochemistry Nanoscale Dynamics inCondensed matter Atomic Physics Plasma and Warm Dense Matter Structural Studies on Single Particles and Biomolecules FEL Science/Technology • SLAC-PUB-611 Program developed by international team of scientists working with accelerator and laser physics communities

  5. 100 fs in early operation, ~1 fs in future LCLS Design Parameters Fundamental FEL Radiation Wavelength 1.5 15 Å Electron Beam Energy 14.3 4.5 GeV Normalized RMS Slice Emittance 1.2 1.2 mm-mrad Peak Current 3.4 3.4 kA ρParameter 4x10-4 8x10-4 Bunch/Pulse Length (FWHM) ≤230 ≤ 230 fs Relative Slice Energy Spread @ Entrance <0.01 0.025 % Saturation Length 87 25 m FEL Fundamental Saturation Power @ Exit 8 17 GW FEL Photons per Pulse 1 29 1012 Peak Brightness @ Undulator Exit 0.8 0.06 1033 * Transverse Coherence Full Full RMS Slice X-Ray Bandwidth 0.06 0.24 % RMS Projected X-Ray Bandwidth 0.13 0.47 % * photons/sec/mm2/mrad2/ 0.1%-BW

  6. Far Hall Undulator Near Hall Linac Coherent Light Source

  7. 1.4 1.3 Linac 1.2 Injector 250 MeV 4.30 GeV 13.6 GeV 6 MeV 135 MeV Linac-X L =0.6 m Linac-0 L =6 m rf gun L0-a,b Linac-1 L 9 m Linac-2 L 330 m Linac-3 L 550 m 25-1a 30-8c 21-3b 24-6d ...existing linac 21-1 b,c,d undulator L =130 m X BC2 L 22 m BC1 L 6 m ‘Wall region’ DL2 L =275 m SLAC linac tunnel research yard

  8. 1.5 X-Ray Transport/Optics/Diagnostics 1.6 End Station Systems

  9. Far Expt. Hall X-ray Transport (250m) Near Expt. Hall Undulator Hall (175m) Beam Dump (40M) Front End (29m) Linac-to-Undulator (227m) 3rd Undulator Line 2nd Undulator Line Near Experiment Hall 1.9 Conventional Facilities

  10. X-ray Transport (250m) Near Expt. Hall Undulator Hall (175m) Beam Dump (40M) Front End (29m) Linac-to-Undulator (227m) 1.9 Conventional Facilities Central Lab Office Complex (CLOC) 49,700 GSF Total

  11. Preliminary Safety Assessment Document Approved 26 January 2006 • https://www-lcls-internal.slac.stanford.edu/projectspace_L2/Project_Office/PMD/PMD_Documents/1.1-016-r0_PSAD_January2006-3.pdf • Preliminary Fire Hazard Analysis Approved 14 October 2005 https://www-lcls-internal.slac.stanford.edu/projectspace_L2/Project_Office/PMD/PMD_Documents/PMD_1.1-012.pdf • LCLS ES&H Plan in place – rev. 2 dated January 2006 https://www-lcls-internal.slac.stanford.edu/projectspace_L2/Project_Office/PMD/PMD_Documents/1.1-011-r2_LCLS_Site_Safety_Program60103.pdf • Updated Project Management Plan Approved 4 April 2005 https://www-lcls-internal.slac.stanford.edu/projectspace_L2/Project_Office/PMD/PMD_Documents/PMD-1.1-001-r1_Project_Mgt_Plan-APril05.pdf • Environmental Assessment confirmed 2/2003, confirmed 1/2006 http://www-ssrl.slac.stanford.edu/lcls/documents/mtf_ss-sc-06-04_lcls_ea.pdf • Independent Project Review Prior to CD3b

  12. 1.2, 1.3, 1.4 1.5, 1.6 1.9 Controls Laser

  13. Jan. 2006 Organization SLAC Project Support H.D. Nuhn Und. Physics J. Welch CF Physics R.M. Boyce Global Schedule and Integration E-beam Systems Manager D. Schultz Controls Systems Manager B. Dalesio SLAC Und. Manager R. Pope Undulator System System Manager S. Milton Chief Engineer G. Pile Metrology C. LeCocq ANL LCLS Project Support R. Hislop ES&H (SLAC) T. Barz QA F. Clark PMCS (ANL) F. Coose Project Analyst J. Ingraffia Procurement P. Mast PMCS (SLAC) P.Styka Accounts Controls J. Stein Magnets and Supports M. White Vacuum and Diagnostics D. Walters

  14. Project Budget • Earned Value: 20.1% of TEC 18.6% of TPC

  15. 33 Undulators 33 Quadrupoles/Correctors EM air-cooled 10 Long breaks 22 Short Breaks Supports with movers 5 DOF plus horizontal slider Vacuum System Al on SS (316LN) “Rectangular” Cross Section 33 rf Beam Position Monitors 33 Beam Finder Wires Beam Loss Monitors Wire Position Monitor Hydro static level system Magnet Measurement Facility LCLS UNDULATOR SYSTEM

  16. SHORT BREAK LONG BREAK SHORT BREAK / LONG BREAK Descoped

  17. Magnet Measurement Facility – Ready in March

  18. MMF construction reveals Ladera sandstone

  19. Recent Significant Changes • Diagnostics • Descope • Wires Scanners • Optical transition radiation monitors • Rescope • End-of-undulator diagnostics • Reduced in value and moved to John Arthur’s discretion • Details of what we build still need to be worked out • Anticipate some savings of the Hydrostatic Level System • Scope Added • Beam Finder Wire (33) • Will be used to locate the “loose end” of the undulator • Will also be used as a beam profile monitor • m – metal shields (to be added soon)

  20. Where this Brings Us • Originally • Undulator System TPC ~$55M • Now ~$45M

  21. Significant “Hot Topics” • RF Beam Position Monitors • Essential for effective operations • We must accelerate their development and completion • Single Undulator Test • Essential to test all form and fit • ANL/SLAC Integration • Need to work more closely with SLAC to ensure • Smooth transfer of knowledge and equipment to SLAC • Clean development of assembly and installation plans

  22. 6 Month Look Ahead Plan/Goals • Undulator • First articles assembled, tested, and at least 1 shipped to SLAC • Assembly production begun by both vendors • Single Undulator Test • Completed but still available for testing purposes • Magnet Measurement Facility • Being commissioned • Vacuum System • Main chamber full scale prototype complete • All other major components prototypes near completion • Diagnostics • Injector test stand testing with beam through the rf bpm completed • Installation complete of the three bpm test and testing with beam imminent • Beam loss monitor design and engineering in progress • Testing of beam finder wire prototype completed • End-of-undulator details fully understood and decisions made about scope • Integration, Assembly, and Installation Planning • Refined and ready to proceed

  23. Further Look Ahead • We will be (we better be) delivering loads of undulators, supports, diagnostics, etc. starting very soon and continuing through all of 2007. • It is going to get very busy in the magnet measurement facility. • All initial assembly is done there along with all measurements and fiducialization. • Overall system integration and assembly planning and refinement are crucial. • We will have no time to waste • Installation in the undulator tunnel will begin roughly in June 2007 (15 months away)

  24. Other Comments • It is imperative that we • Work together as a team • Both within ANL and together with SLAC • Don’t reinvent the wheel if it is not needed • Leverage what other people have done • Accept constructive criticism • Communicate • Move quickly and without delay • Don’t let things linger • We want the ANL LCLS project to look like a model of how one effectively accomplishes a project

  25. I’m Almost Done!

  26. LCLS Design Permits Expansion • 2nd undulator accommodated in the LCLS tunnel • Expandable to at least six “hard x-ray” FEL undulators • Without loss of original investment

  27. Looking Ahead – LCLS development Spring-8 European XFEL

  28. www.lcls.aps.anl.gov

  29. Effort Management • Comparison to the ANL system • ANL system uses estimates generated in the middle of the month by each individual • This in turn is compiled by hand by a variety of people from secretaries to division HR • This information is then passes on to the individual division offices, compiled again by hand and then entered into the ANL HR accounting system • The LCLS uses approximately 50 cost codes and 4 ANL Divisions in 2 different ALDships • Needless to say the above method, handled differently by different divisions, different individuals, and different ALDships leads inevitably to errors • We developed our own completely electronic system to provide a cross check to the official ANL system and manage/control our accounting

  30. Thank you!

More Related