1 / 24

More Than a Chainsaw…

More Than a Chainsaw…. A discussion of modern timber harvesting systems. Eric Johnson Program Director, NH Timberland Owners Association For the Sutton Conservation Commission September 5 th , 2012.

Download Presentation

More Than a Chainsaw…

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. More Than a Chainsaw… A discussion of modern timber harvesting systems. Eric Johnson Program Director, NH Timberland Owners Association For the Sutton Conservation Commission September 5th, 2012

  2. In 2011, there were 13 reported* timber harvests in the town of Sutton.Anyone guess the total value of the wood harvested on those jobs?

  3. Sutton timber harvesting by the numbers: • Value of forest products harvested: • $480,000+ • - this is only the log/ raw wood price- not the finished product value. • Stumpage value- the money paid to landowners for their wood • $105,000+ • Timber tax revenue- estimated- • $10,500 • This is only for 2011.

  4. So how does all this timber harvesting take place? With more than just a chain saw…

  5. Three main timber harvesting “systems” used in New Hampshire • “Conventional” harvesting • Whole-Tree Harvesting • Cut-to-Length Harvesting Lets look at each of these in more detail…

  6. “Conventional” Harvesting • Felling: Hand felling with chainsaw • De-limbing: by hand, with chainsaw • Moving wood to landing: cable skidder • Merchandizing of wood: by hand, with chainsaw

  7. Whole Tree Harvesting • Felling: Feller-Buncher with hot-saw • De-limbing: pull-through or stroke de-limbing- by machine • Moving wood to landing: grapple skidder (often 2 per job) • Merchandizing of wood: log loader and hydraulic saw • Additional – Whole-tree chipper for tops and limbs

  8. Feller-Buncher • Based on excavator- but hot-saw replaces digging bucket. Cost- new- $350-400,000 just to replace a chainsaw?

  9. Grapple Skidder • Uses large grapple tongs to pick up “bunch” or hitch of wood. Cost: $200,000 new- Air conditioning, heat, satellite radio standard

  10. Log loader/de-limber/saw Cost: $220,000 all together Often most experienced crew member or owner- why?

  11. Additional: Whole Tree Chipper Cost: $500,000 new- Produces chips for biomass power plants or for making wood pellets or central heating

  12. Cut-To-Length Harvesting Pioneered in Scandinavia- two machines, two operators

  13. Cut-To- Length Basics: • Felling: Feller-Buncher with harvester head • De-limbing: harvester head- in the woods • Merchandizing of wood: harvester head- in the woods • Moving wood to landing: log forwarder- carrying wood

  14. Harvester/Processor Cost: $500,000+ Fells Tree, Measures it, de-limbs it, and cuts logs to length More buttons on machine than any video game…

  15. Log Forwarder Cost: $300,000- Basically an “off-road” log truck Carries the logs vs. skidding them on ground

  16. So- Which Logging System is the Best? • It Depends! • Size of woodlot • Size and quality of trees • Are there special recreational or wildlife concerns? • Markets, other factors

  17. Size of Woodlot • Smaller woodlot typically means less wood to harvest • Smaller area to use for a landing • Smaller woodlot (25 acres or less) • - typically a conventional or Cut-To-Length are best • lower cost to move • need only a small log landing On a larger woodlot, all systems can function well. Other factors help determine which system to use.

  18. Log Landing for Whole Tree system

  19. Size of Timber • If more than half of timber harvested is 16-18 inches in diameter or larger, then consider a “conventional” system- • A hand cutter can pay attention to higher value stems and maximize log quality • Larger wood is hard on harvester heads and hot-saws • If a majority of the wood is smaller than 16 inches in diameter, or is of low quality (firewood, poorly formed, diseased) then consider either whole-tree or cut-to-length systems- • When wood is of poor quality, one of the mechanized systems is generally a better option because cost per stem is lower with mechanization

  20. Feller-Buncher in smaller wood

  21. Recreation or Wildlife concerns? • If a large area is going to be cleared for wildlife habitat, recreation, or land-clearing, consider a whole-tree harvesting system • With a whole-tree system, much of the brush and tops left behind by Cut-to-length or conventional harvest systems is removed. • Easier access for people and other machines post-harvest • NOTE: Studies have shown that in whole tree harvesting operations, sometimes 40% or more of the biomass is left on site-so it is not like a vacuum cleaner in the woods…

  22. The DISCLAIMER: • You can have either the simplest or the most complex logging system, but if the operator is not skilled or doesn’t care, the results will be disappointing! • Solutions: • Work with a consulting forester • Work with Professional Logger Program trained loggers • Visit a past job and check references • Attend workshops and timber harvest tours sponsored by NHTOA, UNH Cooperative Extension, SPNHF, local land trusts, etc.

  23. Additional Information • New Hampshire Timberland Owners Association • www.nhtoa.org 603-224-9699 • -list of certified loggers and licensed foresters • -list of upcoming workshops and events • Legislative updates on forestry related topics • UNH Cooperative Extension • www.nhwoods.org 1-877-398-4769 • - county foresters available for FREE consultation • - listing of upcoming workshops and events

  24. Thanks for your time! • Eric Johnson • Program and Membership Director • New Hampshire Timberland Owners Association • 603-224-9699 or 603-344-1130 cell • ejohnson@nhtoa.org

More Related