TopSURV

1. TopSURV

2. TopSURV – Start Tap on

3. TopSURV - Static Tick this to use Bluetooth Select the device to use

4. TopSURV - Static Tips: You will normally use demo mode. End users will not see this as they should have the activation ID for GPS+ after purchasing TopSURV.

5. TopSURV - Static Only “default” job is available if you run TopSURV for the first time Select the device to use

6. TopSURV - Static Tap here Tap here

7. TopSURV - Static Tap here Enter name Tips: For controller without keyboard, the TopSURV will display a input board once user tapping in any empty columns. Tips: controller with build in keyboard user can simply use it to enter name.

8. TopSURV - Static Tap here To create one tap here If you have a preset configuration you can use the dropdown list and select it

9. TopSURV - Static Tap here Enter a name Select survey type in this case PP Static The number of survey type is depend on the module purchase This list is the default setting and depend on the module purchase To create a new configuration

10. TopSURV - Static Tap here This will simulate GPS signal mostly use for training Select the base manufacturer

11. TopSURV - Static Tap here to continue Select receiver model Enter elevation mask Select antenna type and height

12. TopSURV - Static Tap here Enter logging rate Chose location log file to be store Define file name to use default or user define

13. TopSURV - Static Tap here Tap here Stake out setting does not apply to static survey Enter initialization time require

14. TopSURV - Static Tap here Tap here Stake out setting does not apply to static survey

15. TopSURV - Static

16. TopSURV - Static What is Co-Op Tracking? GPS Co-Op Tracking allows you to go places and work accurately where no other receiver can. So what exactly is GPS Co Op tracking? The best way to explain it is with an example. Tracking a star at night using a pair of binoculars is pretty easy when sitting in one place. But, tracking the same star while you are driving across a bumpy road at 20 mph and passing through trees is nearly impossible. GPS Co-op tracking is a unique way to use the satellites with their extremely precise and predictable orbit (position) to look back at the moving GPS receiver and keep it in it’s field of view at all times, and when it disappears under tree’s or behind a building for a few seconds, to immediately pick it up when it reappears, hence the term co-op tracking. The receiver and satellites are co-operating to perform this advanced tracking capability.

17. TopSURV - Static Tap here Tap here

18. TopSURV - Static Tap here Tap here Tap here Tap here Select geoid file if you country use geoid Tap here Tap here Select this Tap here Tap here Tap here Tap here

19. TopSURV - Static Tap here Tap here Select unit to use

20. TopSURV - Static Tap here Tap here

21. TopSURV - Static Tap Here Tap Here Tap here Tap here Tap here

22. TopSURV – Static Enter point number or name Enter code

23. TopSURV - Static Enter name of the point Enter description of the code Select style of point, line and area Select type Point Line Area

24. TopSURV - Static Enter attribute Capture photo note

25. TopSURV - Static Tap here Tap here Tips: Please ensure you have sufficient observation time in relation to baseline length. Tips: You can change elevation mask by tapping on Settings.

26. TopSURV - Static Tap here Tap here