60 likes | 96 Views
SNMP. Features You can retrieve MIB-2 and private MIB objects to use software such as SNMP manager software. ( In the case of reading private MIB , MIB definition file is required separately ) For obtaining this file, please contact your local Sony Sales Office .
E N D
SNMP • Features • You can retrieve MIB-2 and private MIB objects to use software such as SNMP manager software. ( In the case of reading private MIB , MIB definition file is required separately ) For obtaining this file, please contact your local Sony Sales Office. • The information you can get through SNMP -The coldStart trap -The authentication failure trap -The sensor input status trap -The object (moving object/unattended object) Detection result trap -The encoder error trap. • Benefit • IT manager can treat IP camera with SNMP same as other network devices through a SNMP manager software.Consequently the system management costs will be reduced. • CGI command / Syntax 1. SettingCommand (See page 2 for details.)2. Inquiry Command (See page 5 for details.) • Notes • To use this function, perform its related settings with the CGI command. Note that this setting option is not provided with the setting menu of a camera. • SNMP setup is enabled by using HTTP protocol (CGI) (SNMP protocol cannot be used). Also, community setting with WRITE authority is not enabled by using SNMP protocol. • Applicable models RZ50* RX530 RX550 * RX570 CS50 * DF50 DF80 CS10 CS11 P1 P5 DF40 DF70 RZ25 Z20 CS3 RZ30 1 * Applicable version: 2.0 or later
CGI Command/Syntax 1. Setting Command (1)Basic Setting 2
CGI Command/Syntax CGI Syntax: http://ip_adr/snmpdconf/snmpdconf.cgi?SnmpVersion=value http://ip_adr/snmpdconf/snmpdconf.cgi?sysLocation=value http://ip_adr/snmpdconf/snmpdconf.cgi?sysContact=value http://ip_adr/snmpdconf/snmpdconf.cgi?sysName=value http://ip_adr/snmpdconf/snmpdconf.cgi?enaAuthTraps=value http://ip_adr/snmpdconf/snmpdconf.cgi?SnmpAlmFunc=value http://ip_adr/snmpdconf/snmpdconf.cgi?community=value,r,value,value http://ip_adr/snmpdconf/snmpdconf.cgi?delcommunity=value http://ip_adr/snmpdconf/snmpdconf.cgi?trap=value,value,value http://ip_adr/snmpdconf/snmpdconf.cgi?deltrap=value 3
CGI Command/Syntax (2) Getting Sensor Input status (3) Getting Object (moving object/unattended object) Detection result *1: Description of Values 2 to 5: CGI Syntax: http://ip_adr/snmpdconf/snmpdconf.cgi?proV1SncTrapFlagSensor1=value http://ip_adr/snmpdconf/snmpdconf.cgi?proV1SncTrapFlagSensor2=value http://ip_adr/snmpdconf/snmpdconf.cgi?proV1SncTrapFlagObject1=value http://ip_adr/snmpdconf/snmpdconf.cgi?proV1SncTrapFlagObject2=value http://ip_adr/snmpdconf/snmpdconf.cgi?proV1SncTrapFlagObject3=valuehttp://ip_adr/snmpdconf/snmpdconf.cgi?proV1SncTrapFlagObject4=value 4
CGI Command/Syntax (4)Getting the current operating status of camera codec Note: All errors cannot be detected even if this command is executed. CGI Syntax: http://ip_adr/snmpdconf/snmpdconf.cgi?proV1SncTrapFlagEncodeError=value 2. Inquiry Command Syntax:1http://192.168.0.100/snmpdconf/inquiry.cgi?inq=snmp Return Value: sysDescr=SNC-RX550&sysObjectID=1.3.6.1.4.1.122.8501&sysLocation=&sysContact=&sysName Syntax:2 http://192.168.0.100/snmpdconf/inquiry.cgi?inqjs=snmp Return Value: var sysDescr="SNC-RX550" var sysObjectID="1.3.6.1.4.1.122.8501" var sysLocation="" var sysContact="" : 5 Note: For parameters other than listed, refer to each description mentioned above.