1 / 31

Infrared Spectroscopy

Infrared Spectroscopy. The structure of new compounds that are isolated from natural sources or prepared in the lab must be determined (and/or verified). Chemical analysis Spectroscopy Spectroscopic techniques are non-destructive and generally require small amounts of sample.

urvi
Download Presentation

Infrared Spectroscopy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Infrared Spectroscopy • The structure of new compounds that are isolated from natural sources or prepared in the lab must be determined (and/or verified). • Chemical analysis • Spectroscopy • Spectroscopic techniques are non-destructive and generally require small amounts of sample

  2. Infrared Spectroscopy • Four common spectroscopic techniques used to determine structure: • Infrared Spectroscopy (IR) • Mass Spectrometry (MS or Mass Spec) • Nuclear Magnetic Resonance Spectroscopy (NMR) • Ultraviolet Spectroscopy

  3. Infrared Spectroscopy • Infrared spectroscopy: • Used to determine the functional groups present (or absent) in a molecule http://riodb01.ibase.aist.go.jp/sdbs/ (National Institute of Advanced Industrial Science and Technology, 1/5/11)

  4. Infrared Spectroscopy • Infrared spectroscopy is a type of absorption spectroscopy: • Any technique that measures the amount of light absorbed by (or transmitted through) a compound as a function of the wavelength of light • Sample is irradiated by a light source • Amount of light transmitted (or absorbed) at various wavelengths is measured by a detector • A spectrum is obtained. • Graph of light transmitted (or absorbed) as a function of wavelength

  5. Infrared Spectroscopy • Infrared spectroscopy uses light from the infrared region of the electromagnetic spectrum. • The absorption of IR radiation leads to absorption bands in the IR spectrum. • The position of a band is reported in wavenumbers (u ) • the number of wavelengths per cm • u = 10,000 where l = mm l • Directly proportional to energy

  6. Infrared Spectroscopy • The atoms in a molecule are in constant motion. • The covalent bond between two atoms acts like a spring, allowing the atoms to vibrate (stretch and bend) relative to each other.

  7. Infrared Spectroscopy • The absorption of IR radiation increases the amplitude of the various types of bond vibrations. • Stretching • Symmetric • Asymmetric • Bending

  8. Infrared Spectroscopy • Since energy is quantized, covalent bonds can vibrate/stretch only at certain allowed frequencies. • The position of an absorption band correlates with the type of chemical bond.

  9. Infrared Spectroscopy • The frequency of an absorption band in an IR spectrum depends primarily on: • Type of vibration • Stretching vibrations: higher frequency • Bending vibrations: lower frequency • Masses of the atoms in a bond • Strength of the bond or bond order

  10. Infrared Spectroscopy • The polarity of a bond has a significant impact on the intensity of an IR absorption band. • Vibrations that cause a significant change in the dipole moment of a chemical bond lead to strong absorption bands. • Vibrations that result in no change/very little change in dipole moment lead to very weak or no absorption band. • Symmetrical bonds often exhibit very weak or no absorption band.

  11. Infrared Spectroscopy • Each molecule has a unique IR spectrum. • The IR spectrum is a “fingerprint” for the molecule. • IR spectrum results from a combination of all possible stretching and/or bending vibrations of the individual bonds and the whole molecule. • Simple stretching: ~1600-4000 cm-1. • Complex vibrations: 600-1400 cm-1, called the “fingerprint region.”

  12. Infrared Spectroscopy • IR Spectrum of n-octane

  13. Infrared Spectroscopy • An IR spectrum is used to identify functional groups that are present (or absent). • Cannot conclusively identify a structure by IR alone unless an IR spectrum of an authentic (known) sample of the compound is available. • Absorptions from specific functional groups are found in certain regions of the IR spectrum.

  14. Carbon-Carbon Bonds • Increasing bond order leads to higher frequencies: • C-C 1200 cm-1(fingerprint region) • C=C 1600 - 1680 cm-1 • CC 2200 cm-1 (weak or absent if internal) • Conjugation lowers the frequency: • isolated C=C 1640-1680 cm-1 • conjugated C=C 1620-1640 cm-1 • aromatic C=C approx. 1600 cm-1 • C=C peaks are generally weak to moderate in intensity.

  15. Carbon-Hydrogen Bonds • Bonds with more s character absorb at a higher frequency. • sp3 (alkane) C-H • just below 3000 cm-1 (to the right) • sp2 (alkene or aromatic hydrocarbon) C-H • just above 3000 cm-1 (to the left) • sp (alkyne) C-H • at 3300 cm-1

  16. O-H and N-H Bonds • Both O-H and N-H stretches appear around 3300 cm-1, but they look different. • Alcohol O-H • broad with rounded tip when hydrogen bonding is present (sharp in the absence of hydrogen bonding) • Secondary amine (R2NH) • Broad (usually) with one sharp spike • Primary amine (RNH2) • Broad (usually) with two sharp spikes. • No signal for a tertiary amine (R3N)

  17. NH Bend • A broad, round peak may be observed around 1600 cm-1 for the N – H bend, especially with primary amines. NH2 stretch N-H bend N-H bend has a different shape than an aromatic ring or C=C

  18. Carbonyls • Carbonyl stretches are generally strong: • Aldehyde ~1710 cm-1 • Ketone ~1710 cm-1 • Carboxylic acid ~1710 cm-1 • Ester ~1730 - 1740 cm-1 • Amide ~1640-1680 cm-1 • Conjugation shifts all carbonyls to lower frequencies. • Ring strain shifts carbonyls to higher frequencies.

  19. Aldehydes

  20. Carboxylic Acids

  21. Ketones

  22. 1743 1245 Esters • C=O stretch at ~ 1730-1740 cm-1 and • C-O stretch at 1000-1300 cm-1 (broad) (Note: other functional groups may have peaks in the 1000-1300 cm-1 region too!) strong

  23. Amides • C=O stretch at 1640-1680 cm-1(sometimes a double peak) • N-H stretch (if 1o or 2o) around 3300 cm-1

  24. Nitriles • C  N absorbs just above 2200 cm-1 (med – strong) • The alkyne C  C signal is much weaker and is just below 2200 cm-1

  25. IR Spectroscopy Example: Interpret the following IR spectrum by assigning each of the major peaks. Identify what functional group(s) are present. 3403 cm-1 1604 cm-1 http://riodb01.ibase.aist.go.jp/sdbs/ (National Institute of Advanced Industrial Science and Technology, 12/30/09)

  26. IR Spectroscopy Example: Interpret the following IR spectrum by assigning each of the major peaks. Identify what functional group(s) are present. 2733 cm-1 2814 cm-1 1642 cm-1 1691 cm-1 http://riodb01.ibase.aist.go.jp/sdbs/ (National Institute of Advanced Industrial Science and Technology, 12/30/09)

  27. 1721 Infrared Spectroscopy Example: Which one of the following compounds is the most reasonable structure for the IR spectrum shown below? http://riodb01.ibase.aist.go.jp/sdbs/ (National Institute of Advanced Industrial Science and Technology, 12/30/09)

  28. 1603 1689 Infrared Spectroscopy Example: Which of the following compounds is the most reasonable structure for the IR spectrum shown below? http://riodb01.ibase.aist.go.jp/sdbs/ (National Institute of Advanced Industrial Science and Technology, 12/30/09)

More Related