1 / 3

Bridge Design part 5

Bridge Design part 5. Note: have straws, tape and testing equipment ready. By Alan Pennington. Making a Straw bridge. Straw Bridge Requirements. You may use up to ten straws, and only masking tape at joints, pieces can only touch at joints

urbana
Download Presentation

Bridge Design part 5

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Bridge Design part 5 Note: have straws, tape and testing equipment ready By Alan Pennington

  2. Making a Straw bridge

  3. Straw Bridge Requirements • You may use up to ten straws, and only masking tape at joints, pieces can only touch at joints • Must be at least 5cm high and 16cm long and be able to hold a 10cm2 plate on the middle top for testing over a 12cm “canyon” • The bridges will be tested until they fail. Winning group will receive a prize • A report (evaluation) of your bridge including a sketch, list of strengths and weaknesses, design process and what learned will be due

More Related