Loading in 2 Seconds...
Loading in 2 Seconds...
Ricoh Printer Error Code SC 552 is a typical fusing thermistor error. Avail instant solution via RicohÂ Printer Tech Support Number 1-800-610-6962 to deal with this error. You can easily fix Ricoh SC 552 Error Code or other Ricoh Printer Common Errors Codes and Messages by Ricoh Printer Customer Care Service number.\n
Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.
Ricoh Printer Error Code SC 552 is a typical fusing thermistor error. Avail instant solution via Ricoh Printer Tech Support Number 1-800-610-6962 to deal with this error. You can easily fix Ricoh SC 552 Error Code using simple effective solutions.
The error code in general represents fusing error inside the thermistor. When the fusing lamp is not properly connected, you can get this error. There are many other possibilities for this error. Several other thermistor issues can cause this error. You need to check each and troubleshoot them separately. You can also encounter this error is the thermistor is gone bad or bent somehow. When the thermistor position is not correct, this error code can pop up suddenly. Sometimes it can get clogged with toner and shows you this error.
Solution1: Removing Paper Jam
It is possible that the thermistor is somehow mechanically damaged due to a paper jam. Look for a paper jam inside the Ricoh device. To do so, you need to open up your printing device and remove all sort of small piece of papers that are being struck inside the printer. Also free the printing rollers from debris piece of papers to get rid of this issue easily.
Solution2: Reset Ricoh Printer
If the error code still persists, resetting your printer will help you to dismiss this error. Reset your printer using tech mode and observe the 1-106 temp settings.
While the machine is warming up, you need to go through the temp settings carefully. Sometimes, the thermistor needs a heat lamp.
Solution3: Cleaning of the Build-up Toner
If there is a toner build-up on the hot roller thermistor, clean it properly to get rid of this error effectively.
Address : California City, CA 93505, USA
Email : firstname.lastname@example.org
Toll Free- : 1-800-610-6962
Visit at us -: http://printertechsupportnumbers.com/blog/how-to-fix-ricoh-printer-error-code-sc-552/