1 / 5

Discussion for 11ah Functional Requirements

Discussion for 11ah Functional Requirements. Date : 2011-07-17. Abstract. This submission is a preliminary submission for discussions on the functional requirements for TGah , based on the smart meter use case. Issues to be discussed (1). 802.11ah Network discovery

tuyen
Download Presentation

Discussion for 11ah Functional Requirements

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Discussion for 11ahFunctional Requirements Date:2011-07-17

  2. Abstract • This submission is a preliminary submission for discussions on the functional requirements for TGah, based on the smart meter use case.

  3. Issues to be discussed (1) • 802.11ah Network discovery • There may be many BSSs in the same area and each BSS may support multiple services. • STA should be able to find the proper AP easily • 802.11 Association & Authentication • Collision is expected to become more serious with the increasing number of STAs compete for association & authentication • Contention-free period should be considered for Association & Authentication to reduce collision

  4. Issues to be discussed (2) • STA initial configuration • STA should report data periodically according to the service feature, for use case such as smart meter • STA need to be configured with duty cycle, server address and etc during initial link setup • Data report • STA usually has very few data to report for each duty cycle • Non-IP solution should be considered to improve throughput efficiency and reduce the frame length to save power

  5. Thanks

More Related