Tsur Ben David Tells Areas of Cooling Towers to Reduce Water Consumption?

1. Tsur Ben David Tells Areas of Cooling Towers to Reduce Water Consumption? These types of machinery are installed in areas where heat is typically rejected by the system through the evaporation process. You will find a cooling tower in various industrial or commercial applications. As per Tsur Ben David, a leading name in the water industry and a leading campaigner of water conservation in the industry,

2. Evaporation Evaporation cooling is considered an important aspect of an open-loop cooling tower. According to some industry experts, the consumption of water cannot be reduced without degrading the performance of a cooling tower. However, the water waste will increase if the system is placed in a windy and hot spot. Therefore, you should reduce the heat load. For this, you can opt for closed-loop or dry systems so that evaporation can be controlled.

3. Blow-down It is quite a crucial part of the process to efficiency and expands the lifespan of the tool. How? As per the opinion of Tsur Ben David, this process reduces the solids’ buildup i.e. dust, dirt, salts, calcium, etc. At this step, you should measure the conductivity of the cooling water to keep a check on blow-down discharge.

4. Blow Down’s Reuse Some leading service providers such as CET Enviro are now focusing on the reusing process of blow-down water. Even though this water contains a higher level of dissolved solids, it can be used for various other purposes such as toilet flushing, cleaning, and so on. Source:- https://techfuznews.com/2023/01/02/tsur-ben-david-tells-areas-of-cooling-towers-to-reduce-water-consumption/