re.rockspace.local | ap.setup

1. https://rerockspace-locals.com/ap-setup/

2. About Us In this article, you will get step by step instructions on how to setup and install your Rockspace local wireless extender through the https://ap.setup wizard page. Ap.Setup is an offline web page where you can configure your Wifi extender of any brand pretty easily within few minutes. If you wish to improvise the extender’s wireless setting, you can do the same in the dashboard available through Ap.Setup. Next time onwards, browse the assigned IP address of the extender by your router to login to your extender’s settings page. After setup you can access the internet from any corner of your house at the router’s original bandwidth.

3. How to set up and install your Rockspace Wireless Extender through ap.setup wizard? 1. Firstly, You need to plug Rockspace wireless extender. Please note that your Rockspace wireless extended should be in the range of your existing WiFi router. It helps you to set up the router easily.. 2 Open any web browser on your computer and on the address bar, enter the URL either http://ap.setup or the IP addresshttp://192.168.0.50. 3. Now login page will automatically pop up on your computer screen and will begin its process. 4. This page may ask you for login credentials, please go through the manual or sticker paste on the router itself for login details. 5. Now you will see wizard homepage, please click on the next button to continue or follow the instructions. 6. Go to the wireless setting of your computer to scan for all nearby available networks, it will show a list of available Wi-Fi networks in range, please select the Rockspace local extender network and click on connect. 7. Once you click on connect, it may ask for the network security password. You can find the security key on the back or bottom side of the Rockspace local extender.. If it is an open Wi-Fi, click on the Next button to continue. 8. Once done, you will get a re.rockspace.local login wizard screen to set up a new SSID name and password. Click next to continue. 9. The setup process is now complete. Now you can move your extender anywhere within the of your existing router and you can also connect your wireless devices on Rockspace local extender by using new SSID and security key.

4. Trying to change the Admin Password Rockspace Local Wireless Extender ? Make sure that your computer is connected on the Rockspace Wireless Extender network. Always use wired connection for this process. The default Username is “admin” and password is nil for all Rockspace Wireless Extender. Default login credentials can be different for some particular models. To check that, please go through the product manual. 192.168.1.1 is the default web address for ap.setup web page. Do not forget to clean the caches from the browser.

5. Gallery Re.rerockspace.local extender local setup Essentially, the wireless signal of any router can be strengthened or repeated to give full signal coverage in dead zone areas and this is proved by the rockspace local  Wireless Range Extender. The arrangement for this type of connection through Rockspace local Extender must be done while offline mode of re.rockspace.local or Http://re.rockspace.local  RS Wi-Fi App  Connect the Rock Space Mesh mode–The primary mode you set up is the basic mode, while the rest regions are secondary nodes. On the off chance that it doesn’t create much difficulty, you can power ON one Mesh initially and connect the other Mesh after you set the main Mesh to the web on the Apps

6. Contact us Website:- https://rerockspace-locals.com/ap-setup/ Address:- 2198 Finwood Road, Newark, New Jersey, 07102 Contact no.:- 9177320091