1 / 5

Take 5 for Safety

Facility Authorization Basis at BNL Safety Photos of the Week Collider-Accelerator Department 3-23-2010. Take 5 for Safety. Facility Authorization Basis at BNL. Facility types allowed by BNL SBMS Accelerator Hazard Category 1, 2 and 3 Nuclear

trinh
Download Presentation

Take 5 for Safety

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Facility Authorization Basis at BNL Safety Photos of the Week Collider-Accelerator Department 3-23-2010 Take 5 for Safety

  2. Facility Authorization Basis at BNL • Facility types allowed by BNL SBMS • Accelerator • Hazard Category 1, 2 and 3 Nuclear • Former Nuclear Facility Downgraded to Radiological • Radiological (facility has a Radiation Area and radioactivity) • Chemical (>29 CFR 1910.119 chemical inventory) • Industrial (<29 CFR 1910.119 chemical inventory) • All facilities must have BNL or BNL/DOE approval for • Design and construction • Documented hazard identification, assessment and controls • Readiness confirmation • Safety Envelopes or Operational Safety Limits and/or Facility Use Agreement (FUA)

  3. Safety Photos of the Week: Rules are Rules • Good news: It was a normal day (April 18, 2002) in Sharon Springs , KS, when a Union Pacific crew boarded a loaded coal train for the long trek to Salina • Bad news: Just a few miles into the trip a wheel bearing became overheated and melted, letting a metal support drop down and grind on the rail, creating white hot molten metal droppings spewing down to the rail • Good news: A very alert crew noticed smoke about halfway back in the train, stopped the train in compliance with the rules, and walked ½ mile back • Bad news: The car with the hot wheel bearing was stopped on a wooden bridge with creosote ties and trusses; the crew tried to explain to higher-ups but were instructed not to move the broken car; they unhooked the front half of train • Federal Railway Agency Report: one car started the fire; crew stopped train to investigate cause of smoke; car with failed bearing had stopped on top of a wooden bridge and caused heat to ignite bridge; the heat ignited the coal that was loaded in the cars; when train started to fall, coal dust in the air flashed and completely destroyed the bridge and the cars on the bridge • No one hurt; $2M loss

More Related