1 / 3

TP-link Router Setup Over tplinkwifi.net

A Broadband Internet Access Service is essential for tplinkwifi.net access, possibly either over Ethernet network cable wire, DSL or Cable network connection.

Download Presentation

TP-link Router Setup Over tplinkwifi.net

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. TP-link Router Setup Over tplinkwifi.net Prerequisites for Connecting to the TP-Link Wi-Fi Router wifi – TP-link router setup: ●A Broadband Internet Access Service is essential for tplinkwifi.net access, possibly either over Ethernet network cable wire, DSL or Cable network connection. ●A Cable or DSL Modem is a requisite too with a condition that it must have RJ45 connector if your TP-link router model is attached to modem with wired wire. ●A Computer device is needed for directing TP-link router login and TP-link router setup across tplinkwifi.net, it must be connected to the router model employing an Ethernet cable or utilizing RJ45 connectors. ●TCP/IP protocol should be functioning on the computer. ●Accessible Internet Web browsers to direct Asus router setup through router.asus.com login.

  2. Positioning TP-Link Wi-Fi Router ahead of TP link Router Setup: ●Set your TP-Link Wi-Fi router in midway and open location of your house ●Position your TP-link router in the setting that would cause minimal wireless signal interference from any surrounding metal, or concrete or magnetic objects. ● Site your TP-link router on the floor to secure high wireless network signal strength from it. ●Set your TP-link router in the zone that is devoid of any direct sun rays. Installation of TP-Link Wi-Fi Router- TP-link router setup Before you initiate TP-link router setup, you must be certain about your TP-link router being connected to the Internet network connection via broadband service as discussed earlier. ●Turn out your previously connected modem, TP-link router &your computer by dowsing from power. ● Set up your TP-link router model in the middle zone for proper wireless network signal. ●Couple the TP-link router’s antennas to the provided ports in the upright direction and affix them pointing in all directions for uniform signal strength at all sides. ●Bridge the computer to the TP-link router model adjoining them at one of the four given LAN ports of the TP-link Wi-Fi router utilizing an Ethernet cable. ●Next, also link your modem to the TP-link router model adjoining it at the router’s given WAN port making use of another Ethernet cable.

  3. ●Boot up all the connected devices - computer, TP-link router model and turn on. ●Initiate the TP-link router setup directing tplinkwifi.net and router login details over web browsing. TP-link router setup directed through tplinkwifi.net 1. Direct the TP link router login over the web browsing window using the login web domain www.tplinkwifi.net utilizing TP-link router login steps as explained below. 2. Perform TP-link router login process over the browser: ●Get to the Internet Browsers on your Computer to reach through the TP-link router login with tplinkwifi.net. ●Input the TP-link router login web protocol address www.tplinkwifi.net or default IP TP 192.168.1.1 n web browser address bar to site the TP-link router configuration page. ●On the displayed login page, enter the TP-link router default information - that is “admin” in both the username and password tabs for reaching into the TP-link router’s admin page. 3. Authorize the TP-link router Configuration for wireless network settings to connect using the wireless SSID/network name And the network key as required. 4. The TP-link router setup is completed following the router configuration of the network directed over tplinkwifi.net.

More Related