1 / 30

IV. Electromagnetic Induction

IV. Electromagnetic Induction. Further and deeper relations between electric and magnetic fields. IV–1 Faraday’s Law. Main Topics. Introduction into Electro-magnetism. Faraday’s Experiment. Moving Conductive Rod. Faraday’s Law. Lenz’s Law. Examples. Introduction into Electro-magnetism.

tiva
Download Presentation

IV. Electromagnetic Induction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. IV. Electromagnetic Induction Further and deeper relations between electric and magnetic fields

  2. IV–1 Faraday’s Law

  3. Main Topics • Introduction into Electro-magnetism. • Faraday’s Experiment. • Moving Conductive Rod. • Faraday’s Law. • Lenz’s Law. • Examples

  4. Introduction into Electro-magnetism • Many scientists in history were interested in relation between electric and magnetic fields. When it was known that electric currents producemagnetic fields and interact with them a natural question appeared: do also magnetic fields produceelectric fields? • Simple experiments somehow didn’t work.

  5. Faraday’s Experiment I • Michael Faraday (1791-1867) used two coils on a single toroidal core. He used a power-source to produce a current through the first coil and he connected galvanometer to the other coil. He probably was not the first one to find out that there was nocurrent through the galvanometer, regardless on how strong the current was.

  6. Faraday’s Experiment II • But he was the first who noticed that the galvanometer deflected strongly when the power source was switched on and it also deflected in the opposite direction when he opened the switch and disconnected the power source. • He correctly concluded that the galvanometer reacts to the changes of the magnetic field.

  7. Simple Demonstration I • We can show the effect of electromagnetic induction and all its qualitative properties simply, using a permanent magnet and few loops of wire, connected to a galvanometer. • If we move the magnet into the coil the galvanometer moves in onedirection if we move it out the deflection directionchanges, as well as it does if we turn the magnet.

  8. Simple Demonstration II • If we make the experiment more accurately, taking into account which pole of the magnet is the north we find out that the current has such a direction that the field it produces goes against the changes of the external field we do by moving the magnet. • We can also notice that it is sufficient to tilt the magnet and keep in the same distance.

  9. Moving Conductive Rod I • Before we state the general law describing the effect it is useful to study one special case of a conductive rod of a length lmovingperpendicularlyto the field lines of a uniformmagneticfield with a speed v. • Let us expect positive free charge carriers in the rod. Since we force them to move in magnetic field, they experience Lorenzforce.

  10. Moving Conductive Rod II • The charges are free in the rod so they will move and chargepositively one end of the rod. • The positive charge will be missing on the other end so it becomes negative and new electricfield appears in the rod and the force it does on the charges is opposite to the Lorenzmagneticforce.

  11. Moving Conductive Rod III • An equilibrium will be reached when the electric and magnetic forces are equal so the net force on the charges is zero and the charging of the rod thereby stops: qvB = qE = qV/l V = Bvl • We see that the above is valid regardless on the polarity nor the magnitude of the free charge carriers.

  12. The Magnetic Flux I • We have seen that movement of a conductive rod in magnetic field leads to induction of a potential difference in direction perpendicular to the movement. We call this electro-motoric force EMF. • This was a special case of change of a new quantity the fluxof the magneticinduction or shortly the magneticflux.

  13. The Magnetic Flux II • The magnetic flux is defined as It represents amount of magnetic induction which flows perpendicularly through a small surface, characterized by its outer normal vector . • Please, repeat what exactly the scalar and the vector product of two vectors means!

  14. The Gauss’ Law in Magnetism • The total magnetic flux through a closed surface is always equal to zero! • This is equivalent to the fact that magneticmonopolesdon’texist so the magnetic field is the dipole field and its fieldlines are alwaysclosed. • Any fieldline which crosses any closed surface must cross it also in again somewhere else in opposite sense.

  15. The Faraday’s Law I • The general version of Faraday’s law of induction states that the magnitude of the induced EMF in some circuit is equal to the rate of the change of the magnetic flux through this circuit: • The minus sign describes the orientation of the EMF. A special law deals with that.

  16. The Faraday’s Law II • The magnetic flux is a scalar product of two vectors, the magnetic induction and the normal describing the surface of the circuit. So in principle three quantities can change independently to change the magnetic flux: • B … this happens in transformers • A … e.g. in our example with the rod • relative direction of and … generators

  17. The Lenz’s Law • The Lenz’slaw deals with the orientation or polarity of the induced EMF. It states: • An induced EMF gives rise to a current whose magnetic field opposes the original change in flux. • If the circuit is not closed and no current flows, we can imagine its direction if the circuit was closed.

  18. Moving Conductive Rod IV • Let’s illustrate Lenz’s law on our moving rod. Now we move it perpendicularly to two parallel rails. • If we connect the rails on the left, the fluxgrows since the area of the circuit grows. The current must be clockwise so the field produced by it points into the plane and thereby opposes the grow in flux.

  19. Moving Conductive Rod V • If we connect the rails on the right, the fluxdecreases since the area of the circuit decreases. The current must be counterclockwise so the field produced by it points out of the plane and thereby opposes the decrease in flux. • The current in the rod is in both cases the same and corresponds to the orientation of the EMF we have found previously.

  20. Simple Demonstration III • If we return to the demonstration with a permanent magnet and a galvanometer. • From its deflection we can see what is the direction of the the currents in the case we approach the wire loop and the case we leave it. From this we can find which pole of the magnet is the north and verify it in the magnetic field of the Earth.

  21. Rotating Conductive Rod I • A conductive rod l long, is rotating with the angular speed  perpendicularly to a uniform magnetic field B.What is the EMF? • The rod is “mowing” the field lines so there is EMF. But each little piece of the rod moves with differentspeed. We can imagine the rod like many little batteries in series. So we just integrate their voltages.

  22. Moving Conductive Rod VI • A QUIZ : • Do we have to do work on the conductive rod to move it in magnetic field?

  23. Moving Conductive Rod VII • The answer is: • NO after the equilibrium is reached between electric and magnetic forces and net current doesn’t flow in the rod! • The situation will change when we bridge the rails by a resistor. WHY ?

  24. Homework • Chapter 29 – 1, 3, 4, 5, 23, 24, 25, 38, 39, 45

  25. Things to read and learn • This Lecture Covers Chapter 29 – 1, 2, 3, 4 • Advance Reading Chapter 29 – 5, 6; 30 – 1, 2 • Try to understand all the details of the scalar and vector product of two vectors! • Try to understand the physical background and ideas. Physics is not just insertingnumbersintoformulas!

  26. The vector or cross product I Let Definition (components) • The magnitude of the vector Is the surface of a parallelepiped made by .

  27. The vector or cross product II The vector is perpendicular to the plane made by the vectors and and must form a right-turning system. ijk = {1 (even permutation), -1 (odd), 0 (eq.)} ^

  28. The scalar or dot product Let Definition I. (components) • Definition II. (projection) Can you proof their equivalence? ^

  29. Gauss’ Law in Magnetism • The exact definition: ^

  30. Rotating Conductive Rod • At first we have to deal with the directions. If the field lines come out of the plane and the rod rotates in positive direction the center of rotation will be negative. dV in dr: • And total EMF: ^

More Related