Why Material Still Matters In Cushions For Outdoor Furniture The cushions for outdoor furniture must be of such quality to resist the outdoor elements in addition to being capable of withstanding the normal tear and wear from being sat or lied upon. The punishment from the outside elements of extreme hot or cold conditions can only be resisted by the best quality materials. Before you even ask yourself how much it will cost you, think in terms of whether it can resist the outside elements. Resistance to water and ultra violet rays of the sun is also an important factor to consider.
The materials: The popular materials are PVC (Polyvinyl Chloride), Dacron, also known as Polyethylene terephthalate (PET), Acrylic Linen and Cotton Canvas. Cotton Canvas is generally cheap but is not resistant to sun’s UV rays and is also not resistant to water unless treated. The other common materials namely PET, Acrylic Linen and PVC are resistant to both water and UV rays. The cost of these materials varies depending on its degree of sun’s rays during the summer season, and resistance to mildew and moisture during the winter. The best quality stuff may be a bit costly but you will always find amazing deals at the outdoor cushions clearance of most online stores. If you buy cheap cushions made of low quality material, it will not be able to resist exposure to harsh weather conditions season after the other and you will need to replace it soon.
Water resistance is not water proof: In some online stores you will find that cushions are described as water resistant. Rarely will you find one described as water proof. These two terms are confusing to most buyers and some will buy water resistant lowes outdoor cushions thinking that they are waterproof. A water resistant material resists water penetration to some degree and is not entirely resistant to the same. On the other hand, waterproof means that the material is impervious to water. Another important term to note when buying home depot patio cushions is water repellent which basically means that the material cannot be penetrated easily by water, in most cases as a result of being treated with surface coating for that particular purpose.