1 / 44

PHYSICAL CHEMISTRY ERT 108 Semester II 2010/2011

PHYSICAL CHEMISTRY ERT 108 Semester II 2010/2011. Huzairy Hassan School of Bioprocess Engineering UniMAP. Standard Thermodynamic Functions of Reaction. Introduction.

theola
Download Presentation

PHYSICAL CHEMISTRY ERT 108 Semester II 2010/2011

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PHYSICAL CHEMISTRYERT 108Semester II 2010/2011 Huzairy Hassan School of Bioprocess Engineering UniMAP

  2. Standard Thermodynamic Functions of Reaction

  3. Introduction This chapters explains how to use tablesof thermodynamic properties (for ex: G, H, and S) for individual substances with respect to reactions in equilibrium:

  4. Standard States of Pure Substances Standard States - For a pure solid and pure liquid: Standard state is defined as the state with pressure P = 1 bar and temperature T, where T is some temperature of interest. thus, for each value of T, there is a single standard state for a pure substance.

  5. For example; The molar volume of a pure solid or liquid at 1 bar and 200 K is symbolized by • Superscript º (“naught”, “zero”, or “standard”) • subscript 200 (temperature)

  6. For a pure gas: • The standard state at temperature T is chosen as the state where P = 1 bar and the gas behaves as an ideal gas. In summary; The standard-state pressure is denoted by Pº Pº ≡ 1 bar

  7. Standard Enthalpy of Reaction Standard enthalpy (change) of reaction • Is the enthalpy change for the process of transforming stoichiometric numbers of moles of the pure, separated reactants, each in its standard state at temperature T, to stoichiometric numbers of moles of the pure, separated products, each in its standard state at temperature T. • Often (or ) is also called heat of reaction. • is defined in a similar manner.

  8. For the reaction The standard enthalpy change is; where is the molar enthalpy of substance C in its standard state at temperature T. For the general reaction; Eq. (5.3)

  9. Where the are the stoichiometric coefficients (+ve for products and –ve for reactants) and is the molar enthalpy of in its standard state at T.

  10. For example; for =

  11. - Stoichiometric coefficient is dimensionless, so the units of are the same with , namely J/mol or cal/mol • sometimes, the subscripts m or T are omitted  • depends on how the reaction is written, for ex: the standard enthalpy of reaction is twice that for;

  12. For reactions 5.4 & 5.5; • Although we cannot have half a molecule, we can have half mole of O2, (5.5) is a valid way of writing a reaction in chemical thermodynamics. • The at T = 298 K for; (5.4)  (5.5)  • The factor mol-1 in indicates  that we are giving the standard enthalpy change per mole of reaction as written, where the amount of reaction that has occurred is measured by ξ, the extent of reaction.

  13. A value is for ξ= 1 mol • Since = ,  when ξ= 1 mol for (5.4), 2 mol of H2O is produced;  whereas when ξ= 1 mol for (5.5), 1 mol of H2O is produced.

  14. Aims to calculate of a reaction from tabulated thermodynamic data for reactants and products. However, the laws of thermodynamics only allow us to measure changes in entalpy, internal energy and entropies (ΔH, ΔU and ΔS, not the absolute values of U, H, and S, and we cannot tabulate absolute enthalpies of substances.  Instead, we can tabulate standard enthalpies of formation In summary

  15. Phase abbreviations: s solid l liquid g gas cr crystalline (solids that have an ordered structure at the molecular level) am amorphous (solids with a disordered structure) cd condensed phase (either a solid or a liquid) fl fluid phase (either a liquid or a gas)

  16. Standard Enthalpy of Formation Standard Enthalpy of Formation (or Standard Heat of Formation) of a pure substance at T is for the process  in which 1 mol of the substance in its standard state at T is formed from the corresponding separated elements at T, each element being in its reference form. - The reference form (or reference phase) of an element at T is usually taken as the form of the element that is most stable at T and 1-bar pressure.

  17. For example; The standard enthalpy of formation of gaseous formaldehyde H2CO(g) at 307 K, symbolized by is the standard enthalpy change for the process; - Gases on the left are in their standard states (unmixed, in pure state at standard pressure Pº = 1 bar and 307 K). - at 307 K and 1 bar, the stable forms of hydrogen and oxygen are H2(g) and O2(g)  so, taken as reference forms of hydrogen and oxygen.

  18. - For an element in its reference form, is zero. • For example; of graphite is of the reaction C(graphite, 307 K, Pº)  C(graphite, 307 K, Pº) - nothing happens in this process, so, its is zero. - For diamond, is not zero, but is of which experiment gives as 1.9 kJ/mol. C(graphite, 307 K, Pº)  C(diamond, 307 K, Pº)

  19. Standard enthalpy change is; Whereis the stoichiometric coefficient of substance i in the reaction and is the standard enthalpy of formation of substance i at temperature T. Prove it !!!

  20. Figure 5.1 shows 2 different isothermal paths from reactants to products in their standard states. • Step 1 – is a direct conversion of reactants to products • Step 2 – is a conversion of reactants to standard-state elements in their reference form • Step 3 – is a conversion of elements to products (the same elements produced by the decomposition of the reactants will form the products)

  21. Since H is a state function, ΔH is independent of path and ΔH1 = ΔH2 +ΔH3 we have ΔH1 = for the reaction. 1) The reverse of process 2 will form aA + bB from their elements. Hence, Where is the standard enthalpy of formation of substance A at temperature T.

  22. Step 3 is the formation of cC + dD from their elements, so The relation ΔH1 = ΔH2 +ΔH3 becomes; From and since –ve for the reactants and +ve for products. ⨳

  23. Determination of Standard Enthalpies of Formation and Reaction Measurement of The quantity is for isothermally converting pure standard-state elements in their reference forms to standard-state substance i. To find we must carry out the following steps:

  24. bar

  25. The standard enthalpy of formation is the sum of these six ΔH’s. Figure 5.2 values. The scales are logarithmic. Nearly all thermodynamics tables list at 298.15 K (25 ºC). A table of is given in the Appendix.

  26. Example 5.1 (calculation of from data) Find for the combustion of 1 mole of the simplest amino acid, glycine, NH2CH2COOH, according to;

  27. Solution; We substitute Appendix values into (Eq 5.6) gives as = - 973.49 kJ/mol ⨳

  28. Calorimetry • Step 4  find of a compound; - must measure ΔH for the chemical reaction that forms the compound from its elements. using calorimeter For example: Combustion • Reactions where some of the species are gases (ex: combustion rxn) – studied in a constant-volume calorimeter • Reactions not involving gases – studied in a constant-pressure calorimeter.

  29. The standard enthalpy of combustion of a substance is for the reaction in which 1 mole of the substance is burned in O2. For example; for solid glycine is for reaction in Example 5.1. Some values are plotted in Figure 5.3. (the products are CO2(g) and H2O(l))

  30. Adiabatic bomb calorimeter • Used to measure heats of combustion. (Eq. 5.8)

  31. Example 5.2

  32. Solution:

  33. Relation between ΔHº and ΔUº For a process at constant pressure, ΔH = ΔU + P ΔV ΔHº = ΔUº + Pº ΔVº The changes in standard-state volume and internal energy: The molar volumes of gases at 1 bar are much greater than those of liquids and solids  so only consider the gaseous reactants and products.

  34. For example: Neglect volumes of solid and liquid, A and E; ΔVº = So, by considering ideal gas  = RT / Pº for each gases C, D, and B Hence, c + d – b = (change in number of moles of gas)

  35. Thus, we have; So, from Becomes

  36. For example; Has = 3 – 1 – 5 = -3 So,

  37. Example 5.3 - Calculation of from The reactions not involving gases, is zero.

  38. Hess’s Law Study case: Find the standard enthalpy of formation of ethane gas at 25 ºC.  * Problem: Cannot react graphite with hydrogen and expect to get ethane. So, of ethane cannot be measured directly. So, what now?? we can determine the heat of combustion of ethane, hydrogen, and graphite.

  39. +

  40. Addition of these equations gives; Therefore, (The procedure of combining heats of several reactions to obtain the heat of a desired reaction is Hess’s Law). ⨳

  41. Example 5.4 – Calculation of from The standard enthalpy of combustion of C2H6(g) to CO2(g) and H2O(l) is -1559.8 kJ/mol. Use this and Appendix data on CO2(g) and H2O(l) to find

  42. Solution:

  43. Thank you

More Related