E20-690 Exam Dumps - Download Updated EMC E20-690 Exam Questions PDF 2018

1. EMC EMC Project Expert E20-690 Exam QUESTIONS & ANSWERS (FREE - DEMO VERSION) Download Now Updated E20-690 Exam PFD Demo Buy Full Product Here https://authenticdumps.com/dumps/e20-690/

2. Version: 8.0 Question 1 Which VNX enclosures use a common motherboard architecture? A. DME and SPE B. DPE and SPE C. DPE and 25-drive DAE D. Control Staton and DME Aoswern A Question 2 What protocols does the Data Mover support? A. CIFS, NFS, pNFS and MPFS B. CIFS, pNFS, and SCSI C. MPFS, HTTP, FTP, and NFS D. NFS, FC, and CIFS Aoswern A Question 3 What are the minimum components required to confiure a VNX5500 for Block storaie system? A. Control Staton, SP, DAE B. Control Staton, SP, DME C. SP, DME, DAE D. SPS, SPE, DAE Aoswern D Question 4 Which kind of back-end bus connectvity is supported on a VNX storaie system? A. 4 lane 6 Gb/s SAS B. 4 lane 6 Gb/s FC C. 2 lane 6 Gb/s SAS D. 2 lane 6 Gb/s FC Aoswern A

3. Question 5 How are SAS bus hardware IDs confiured for the VNX enclosures? A. Automatcally assiined durini system boot process B. Assiined by the address switch located on each enclosure C. Assiined by Unisphere Service Manaier D. Assiined by the Backend Bus Reset Wizard in Unisphere Aoswern A Question 6 A customer asks your help in determinini which types of DPE and disk drives are supported in a VNX storaie system. How would you respond? A. 2U DPE with either fieen 2.5” SAS or twenty-fve 3.5" EFD disk drives B. 3U DPE with either fieen 3.5” EFD, SAS or twenty-fve 2.5" SAS disk drives C. 4U DPE with either fieen 3.5” FC, EFD or twenty-fve .2.5" SAS disk drives D. 3U DPE with either fieen 2.5” EFD, FC or twenty-fve 2.5” EFD disk drives Aoswern B Question 7 Refer to the exhibit.

4. Where is DM 3 located? A. Locaton 6 B. Locaton 5 C. Locaton 7 D. Locaton 10 Aoswern A Question 8 What IP address is assiined to the eth2 interface on a Control Staton? A. IP address for the B manaiement network B. IP address for the A manaiement network C. Public IP address for the customer's network

5. D. IP address for the peer Control Staton Aoswern A Question 9 What IP address is assiined to the eth3 interface on a Control Staton? A. IP address for the A manaiement network B. IP address for the B manaiement network C. Public IP address for the customer's network D. IP address for the peer Control Staton Aoswern C Question 10 Refer to the exhibit.

6. Which component is located in locaton 3? A. CS 1 B. CS 0 C. DAE 0 D. DAE 1 Aoswern A Question 11 Refer to the exhibit.

7. Which DAE and components does cable 1 connect? A. SP A slot 0 port 1 to the SAS expander on DAE 0 LCC A B. SP A slot 0 port 0 to the SAS expander on DAE 1 LCC A C. SP B slot 0 port 0 to the SAS expander on DAE 1 LCC B D. SP B slot 0 port 1 to the SAS expander on DAE 0 LCC B Aoswern A Question 12 Refer to the exhibit.

8. Which DAE and components does cable 2 connect? A. SP A slot 0 port 0 to the SAS expander on DAE 1 LCC A B. SP B slot 0 port 1 to the SAS expander on DAE 0 LCC B C. SP B slot 0 port 0 to the SAS expander on DAE 1 LCC B D. SP A slot 0 port 1 to the SAS expander on DAE 0 LCC A Aoswern B Question 13 Where can you fnd the widest ranie of resources for VNX-related informaton? A. VNX Family Product Paie B. Support by Product C. Partners Web Paie D. IP Storaie Handbook

9. Aoswern A Question 14 A new VNX Unifed system has been installed. The eniineer would like to verify that the hosts are runnini a supported operatni system and EMC PowerPath soiware version. What resource should be used? A. VNX Simple Support Matrix B. VNX Procedure Generator C. VNX Installaton Toolkit D. VNX Product Support Bulletns Aoswern A Question 15 Which resource is required for all VNX actvites performed by EMC and Partner personnel? A. Simple VNX Support Matrix B. Host Connectvity Guide C. VNX Procedure Generator D. Interoperability Matrices Aoswern C Question 16 Where can you obtain the VNX Procedure Generator? A. EMC Services Partner Web B. VNX Installaton Toolkit C. Unisphere Service Manaier D. Unisphere Aoswern A Question 17 Where is the collect_support_materials command located? A. /nas/tools B. /nas/sbin C. /nas/bin

10. D. /nas/var/emcsupport Aoswern A Question 18 What comprehensive informaton should you iather when investiatni a VNX performance issue, where back-end confiuraton is a consideraton? A. SP Collects, and NFS statstcs B. collect_support_materials, and SP Collects C. CIFS statstcs, and the back-end device layout D. collect_support_materials, and EMC Grab Aoswern B Question 19 An eniineer is diainosini a VNX File system. Which fle-specifc data do you send them? A. collect_support_materials B. SP Collects C. SYR data D. panic dump Aoswern A Question 20 An EMC service eniineer is tasked with installini a VNX Block storaie system with an SPE. Aier a period of 10 minutes, SP A has booted successfully and SP B's status LED is stll fashini amber. The service eniineer verifes that the cablini is correct. What is one explanaton for why SP B will not boot? A. The top LCC in DAE 0 is faulted B. I/O module 1 in the riiht SP is faulted C. The botom LCC in DAE 0 is faulted D. I/O module 1 in the lei SP is faulted Aoswern A

11. 20% OFF USE Coupen Code Save20 Thank You For Downloading E20-690 Exam PFD Demo (Start Your E20-690 Exam Prepration) Get Updated E20-690 Exam Dumps PFD Demo & Pass in First Attempt Buy Full Product Visit the Link Below https://authenticdumps.com/dumps/e20-690/