Effect of Confinement on Reinforce Concrete Short Rectangular Column

1. International Research Research and Development (IJTSRD) International Open Access Journal Effect of Confinement on Reinforce Concrete hort Rectangular Column International Journal of Trend in Scientific Scientific (IJTSRD) International Open Access Journal ISSN No: 2456 ISSN No: 2456 - 6470 | www.ijtsrd.com | Volume www.ijtsrd.com | Volume - 2 | Issue – 2 Effect of Confinement on Reinforce Short Concrete Khatri A. P Assistant Professor, Department of Civil Engineering, Bhivarabai Sawant College of Engineering and Research, ABSTRACT Assistant Professor, Department of Civil Engineering, Bhivarabai Sawant College of Engineering and Research, Narhe, Pune, Maharashtra India Narhe, Pune, Maharashtra India In this paper presents a comparative investigation based on various types of effective confining material, like (stapled stirrups, WWM, welded spot stirrups, ferrocement, FRP).The transverse reinforcement plays an important role in the ductility of the col preparedness for the formation of the plastic hinges in column, it requires confinement of concrete by transverse reinforcement. To study the effectiveness of the Confinement reinforcement, its quantity, working out the optimum combination of the confinement reinforcement and also the load carrying capacity of the rectangular column. The study of rectangular column is significant as it is used mostly in the practical building construction. This project is high lighting the study of“study the different types of effective confining material on RC rectangular column” improving the confining quality. It also adds the different properties of reinforced concrete column. Keywords: WWM, FRP ,Confinement In this paper presents a comparative investigation based on various types of effective confining material, like (stapled stirrups, WWM, welded spot stirrups, ferrocement, FRP).The transverse reinforcement plays an important role in the ductility of the column. The preparedness for the formation of the plastic hinges in column, it requires confinement of concrete by Failure of one or more columns may lead to the Failure of one or more columns may lead to the collapse of the structure. The devastating earthquake at Bhuj Gujarat in 2001, shocked the entire nation. A buildings in the capital city of Ahemadabad, which is about 300 kms from the epicenter were either badly damaged or collapsed. After the Bhuj mishap, the severity of the provisions in IS 13920 understood by the structural cons percentage of secondary reinforcement in the column ranges from 0.25% to reinforcement. The current equations for confinement reinforcement in IS 13920-1993 does not provide consistent level of safety against deformation and with flexural yielding (Subramanian 2011). As per IS 19320 secondary reinforcement can be determine by using equation (1) 1.1 Confined Concrete In recent years high rise reinforced concrete buildings more than 20 storey high have began to be constructed using strength concrete and transverse reinforcement with high strength steel. When columns with high strength concrete are subjected to severe seismic loading with high axial load, ductility demand for columns at yield zones may be satisfied only by providing the core concrete confinement achieved by using high strength confinement achieved by using high strength The devastating earthquake at Bhuj Gujarat in 2001, shocked the entire nation. A large number of RCC buildings in the capital city of Ahemadabad, which is about 300 kms from the epicenter were either badly damaged or collapsed. After the Bhuj mishap, the severity of the provisions in IS 13920-1993 was understood by the structural consultants. The percentage of secondary reinforcement in the column ranges from 0.25% to To study the effectiveness of the Confinement reinforcement, its quantity, working out the optimum confinement reinforcement and also the load carrying capacity of the rectangular column. The study of rectangular column is significant as it is used mostly in the practical building construction. This project is high lighting the “study the different types of effective confining material on RC rectangular column” by improving the confining quality. It also adds the different properties of reinforced concrete column. 0.35%of 0.35%of the the main main The current equations for confinement reinforcement 1993 does not provide consistent level of safety against deformation and damage associated with flexural yielding (Subramanian 2011). As per IS 19320-1993 the secondary reinforcement can be determine by using during during earthquakes. earthquakes. In recent years high rise reinforced concrete buildings more than 20 storey high have began to be constructed using strength concrete and transverse reinforcement with high strength steel. When columns with high strength concrete are subjected to severe ismic loading with high axial load, ductility demand for columns at yield zones may be satisfied only by providing the core concrete INTRODUCTION Reinforced concrete column is used in all types of building constructions. Column transfers the load from beam and slab to foundation. Column support huge compressive forces in case of tall buildings. Column may suffer the damage due to over loading and natural disasters such as earthquakes and fires because of limited strength and ductility of concrete. because of limited strength and ductility of concrete. Reinforced concrete column is used in all types of building constructions. Column transfers the load from beam and slab to foundation. Column support huge compressive forces in case of tall buildings. Column may suffer the damage due to over loading tural disasters such as earthquakes and fires with with intensive intensive @ IJTSRD | Available Online @ www.ijtsrd.com @ IJTSRD | Available Online @ www.ijtsrd.com | Volume – 2 | Issue – 2 | Jan-Feb 2018 Feb 2018 Page: 1599

2. International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456-6470 transverse reinforcement. Thus, the importance of profound knowledge about the characteristics of confined concrete is increasing with increase of material strength used. Confinement of Concrete is to bind the concrete or to prevent the concrete from spalling. Due to this ductility is imparted to the column so as to resist the axial load, buckling of column, vibrations due to the Earthquake induced inertial forces, also formation of plastic hinges due to excess loading etc. If the area of the confined core is increased the correspondingly the ductility of the column increases. By the provision of the confinement reinforcement the area of the confined core increases. By the provision of the transverse reinforcement in the column in the form of spirals, cross ties etc. , the area of confined core achieved is insufficient to dissipate the earthquake induced inertial forces. So it is necessary to provide extra reinforcement than the nominal. A f A Sh fy A   Where, S= Pitch of spiral or spacing of hoops, h=longer dimension of rectangular confining hoop measured to its outer face. It shall not exceed 300 mm. Ag= Gross area of the column cross section. Ak= Area of confine concrete core in the rectangular hoop measured to its outside dimensions. The shortage of confinement offered by ties is the motivation for using materials such as Expanded Metal Mesh (EMM), Welded Wire Mesh (WMM) and Fiber Reinforced Polymer (FRP) to confine the concrete core (Ahmed reinforcement in columns is in the forms of hoops, cross-ties or spirals play an important role in safeguarding the columns, especially when they are subjected to strong Earthquakes. Hence an equation for the design of confinement reinforcement for ductile earthquake resistant rectangular and circular columns may be modified in the next revision of the code. Objectives: 1)To check the effect of welded wire mesh as a confining reinforcement on rectangular column with different percentage of reinforcement and slenderness ratio. 2)To experimentally assess the performance of confined reinforcement along with conventional ties. 3)To compare the compressive strength of rectangular conventional column and confined column. 4)To study the failure pattern of confined column under compressive load. 2015). Transverse     g   ck 0.18 1.0 sh k Table 1 : Details of confinement Research paper Sr.no Types of confinement Welded wire mesh Remark Improved confinement of reinforced concrete column.(Ahmed M.El-Kholy) Increase ultimate load capacity, better ductility, and larger energy dissipation. increased the ultimate load carrying capacity, Ductility ratio is more ,load carrying capacity is more. 1 Welded spot stirrups Ductility of RCC column with various reinforcing arrangements.(D.Kato) 2 Stapled stirrups Ductility of RCC confined with stapled strips. (M.F.Tahir) Behavior of RCC Column Confined with ferro cement.( Jatinder Malhotra) 3 Ferro cement increased the ultimate load carrying capacity, increased the strength up to 92%, Lateral deflections are significantly minimized. Increase ultimate loading capacity 4 FRP Compressive behavior of concrete confined by CFRP and transverse spiral reinforcement.( Peng Yin) 5 @ IJTSRD | Available Online @ www.ijtsrd.com | Volume – 2 | Issue – 2 | Jan-Feb 2018 Page: 1600

3. International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456 International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456 International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456-6470 2. Experimental Program Columns are failed in a plastic region in a loading conditions like earthquake ect. to strengthen or retrofit the column. To improve the strength, durability, reduce spalling of concrete by providing external confinement to the column. To achieve the required aim, the experimental program has been made. Column specimens were cast. These specimens are classified into different groups. This groups are based on different types of confining material to be used. There are three specimen were casted for each material. This experi gives various load-deflection graphs. Based on their load carrying capacity, deflection of column, cost ratio, durability, strength compare this confining material and gives a effective material to the confinement purposes which is, economica effective. UTM testing machine were used, a dial gauges are mounted on a four sides of specimen. CONCLUSION From the previous research papers result it is that confine column improves the compressive strength of column but from the various materials choosen for the test shows that welded wire mesh give the better results that other materials used for testing. REFERENCES 1)Afifi, M.Z, Mohamed, H.M, Chaallal, O. and Benmokrane, B. (2015). “Confinement Model for Concrete Columns Internally Confined with Carbon FRP Spirals and Hoops.” Journal of Structural Engineering, ASCE, 141(9), 04014219. Structural Engineering, ASCE, 141(9), 04014219. the compression stress– strain of reinforced concrete block masonry boundary elements.” The Institution Engineers, Elsevier, 10 (2), 32 Engineers, Elsevier, 10 (2), 32-43. strain of grouted rete block masonry boundary Institution Columns are failed in a plastic region in an excessive It is necessary of of Structural Structural to strengthen or retrofit the column. To improve the strength, durability, reduce spalling of concrete by providing external confinement to the column. To 4)EI-Kholy, A. M and Dahish, H. A. (2016). “Improved confinement of reinforced concrete columns.” Ain Shams Engineering Journal, 7(2), 717-728. Kholy, A. M and Dahish, H. A. (2016). “Improved confinement of reinforced concrete columns.” Ain Shams Engineering Journal, 7(2), rimental program has been made. Column specimens were cast. These specimens are classified into different groups. This groups are based on different types of confining material to be used. There are three specimen were casted for each material. This experimental result deflection graphs. Based on their load carrying capacity, deflection of column, cost strength compare this confining material and gives a effective material to the confinement purposes which is, economical and 5)Elwood, K.J., and Eberhard, M.O. (2009). “Effective stiffness columns.” ACI Structural Journal, 106 (4), 476 484. , K.J., and Eberhard, M.O. (2009). “Effective stiffness columns.” ACI Structural Journal, 106 (4), 476- of reinforced of reinforced concrete concrete 6)Fung-yuen, H.I., Lam Bo, E.S., and Wang, Y. (2013). “Monotonic Behavior of Reinforced Concrete Columns Performance Ferro cement” Journal of Structural Engineering, ASCE, 139 (4), 574 ASCE, 139 (4), 574-583. yuen, H.I., Lam Bo, E.S., and Wang, Y. (2013). “Monotonic Behavior of Reinforced Concrete Columns rformance Ferro cement” Journal of Structural Confined Confined with with High High- 7)Subramanian, N. (2011). “Design of confinement reinforcement for RC columns” The Indian Concrete Journal. Subramanian, N. (2011). “Design of confinement reinforcement for RC columns” The Indian UTM testing machine were used, a dial gauges are 8)Sakai, K., and Sheikh, S. A. (1989). “What Do We Know about Confinement in Reinforced Concrete Columns? (A Critical Review of Previous Work and Code Provisions),” ACI Structural Journal, 86 (2), 192-207. Sakai, K., and Sheikh, S. A. (1989). “What Do We nement in Reinforced Concrete Columns? (A Critical Review of Previous Work and Code Provisions),” ACI Structural Journal, 86 previous research papers result it is observed that confine column improves the compressive strength of column but from the various materials choosen for the test shows that welded wire mesh give the better results that other materials used for testing. 9)Sharma, U., Bhargava, P., Kaushik, S.K., and Bhowmick, R. (2005). “Evaluation of confinement reinforcement requirements of IS 13920:1993 for RC columns.” The Indian concrete Journal, 3 (3), 51-59. Sharma, U., Bhargava, P., Kaushik, S.K., and Bhowmick, R. (2005). “Evaluation of confinement nts of IS 13920:1993 for RC columns.” The Indian concrete Journal, 3 (3), haallal, O. and Benmokrane, B. (2015). “Confinement Model for Concrete Columns Internally Confined with Carbon FRP Spirals and Hoops.” Journal of 10)IS 13920:1993, Indian standards code of practice for Ductile detailing of reinforced concrete structures subjected to seismic forces, Bureau of Indian Standards, New Delhi, Indian Standards, New Delhi, India. IS 13920:1993, Indian standards code of practice for Ductile detailing of reinforced concrete structures subjected to seismic forces, Bureau of 2)Dimitri, V. V. (2003). “Reliability of Fiber Reinforced Polymer-Confined Reinforced Concrete Columns.” Engineering, ASCE, 129 (8),1122-1130. Dimitri, V. V. (2003). “Reliability of Fiber- Reinforced Concrete Columns.” Journal Journal of of 1130. Structural Structural 11)ACI 318:2008, Building Code Requirements for Structural Concrete, American Concrete Structural Concrete, American Concrete ACI 318:2008, Building Code Requirements for 3)EI Ezz, A. A., Eldin, H. M., and Galal, K. (2015). “Influence of confinement reinforcement on EI Ezz, A. A., Eldin, H. M., and Galal, K. (2015). confinement reinforcement on @ IJTSRD | Available Online @ www.ijtsrd.com Available Online @ www.ijtsrd.com | Volume – 2 | Issue – 2 | Jan-Feb 2018 Feb 2018 Page: 1601