Review on Recent Advancements in the Field of Reinforced Epoxy Nano Composits

1. International Journal of Trend in International Open Access Journal International Open Access Journal | www.ijtsrd.com International Journal of Trend in Scientific Research and Development (IJTSRD) Research and Development (IJTSRD) www.ijtsrd.com ISSN No: 2456 ISSN No: 2456 - 6470 | Volume - 2 | Issue – 6 | Sep 6 | Sep – Oct 2018 Review on Recent Advancements in the Field of Reinforced Epoxy Nano Composits Epoxy Nano Composits on Recent Advancements in the Field of Reinforced on Recent Advancements in the Field of Reinforced Sandesh K S1, Mahesh V M2, Muralidhara B K3 Research Scholar, 2Assistant Professor,3Professor Department of Mechanical Engineering JSS Science and Technology University,Mysore, Karnataka,India Sandesh K S 1Research Scholar Department of Mechani 1,2JSS Science and Technology University 3Nitte Meenakshi Institute of Technology Nitte Meenakshi Institute of Technology,Bangalore, Karnataka, India India Bangalore, Karnataka, India ABSTRACT Composite materials especially the polymer matrix materials are well acknowledged for their applications in aerospace, automotive and structural applications. They are considerably light weight and offers high strength weight ratio. Epoxy is one of the widely used matrix material in PMCs (Polymer matrix composite) due to its exceptional bonding capabilities, it finds applications in the field of coating, adhesives and composite materials. Graphene is a novel material in the field of composite materials it offers high strength, very high electrical conduction and heat tr composites of Epoxy and Graphene hybrids exhibit very high mechanical and thermal properties. Keywords:composites, polymer matrix, Epoxy, Graphene, hybrid, mechanical, thermal I. INTRODUCTION A composite is a material made from two or more different constituent materials having different physical or chemical properties which do not merge in the finishing structure, i.e., the individual constituents retain their properties. In recent years, poly based composites materials are being used in many application such as automotive, sporting goods, marine, electrical, industrial, construction, household appliances, etc Polymeric composites have high strength and stiffness, light weight, and high co resistance. In engineering and material science, composites are defined as physical mixtures of chemically different materials that are insoluble in each other and are thus present as distinct phases: usually a continuous phase (matrix), and a discontinuous phase. II. A. Classification Based on Reinforcements 1.Particle-reinforced composites 2.Fiber-reinforced composites Composites in which the dispersed reinforcing phase is present in the form of particles is called particle reinforced composites. Composites in which the dispersed reinforcing phase in the form of fiber are called fiber reinforced composites (FRC). B. Classification Based on Matrix 1.Polymer Matrix Composites (PMC) 2.Metal Matrix Composites (MMC) 3.Ceramic Matrix Composites (CMC) In polymer matrix composites, the matrix phase is polymer and the reinforcing phase may be fibers or ceramic particles. These materials are used in various composite applications, and also in large quantities because of their low cost and ease of fabrication. In metal matrix composites, the matrix is a ductile metal or alloy and the reinforcing medium is continuous like fibers of carbon, silicon carbide, boron and alumina. Discontinuous reinforcement includes silicon carbide whiskers, chopped fibers of carbon and alumina, particulates of silicon carbide and alumina. In ceramic matrix composites, particulates, fibers or whiskers of one ceramic material are embedded into the matrix of another ceramic material. These ceramic composites have improved fracture toughness and high stress application compared to the ceramic material alone. Ceramic composite materials are material alone. Ceramic composite materials are CLASSIFICATION OF COMPOSITES CLASSIFICATION OF COMPOSITES Classification Based on Reinforcements reinforced composites reinforced composites Composite materials especially the polymer matrix well acknowledged for their applications in aerospace, automotive and structural applications. They are considerably light weight and offers high strength weight ratio. Epoxy is one of the widely used matrix material in PMCs (Polymer matrix composite) to its exceptional bonding capabilities, it finds applications in the field of coating, adhesives and composite materials. Graphene is a novel material in the field of composite materials it offers high strength, very high electrical conduction and heat transfer. The composites of Epoxy and Graphene hybrids exhibit very high mechanical and thermal properties. Composites in which the dispersed reinforcing phase is present in the form of particles is called particle- reinforced composites. Composites in which the dispersed reinforcing phase in the form of fiber are called fiber reinforced composites (FRC). lassification Based on Matrix Polymer Matrix Composites (PMC) Metal Matrix Composites (MMC) Ceramic Matrix Composites (CMC) composites, polymer matrix, Epoxy, In polymer matrix composites, the matrix phase is polymer and the reinforcing phase may be fibers or materials are used in various composite applications, and also in large quantities because of their low cost and ease of fabrication. A composite is a material made from two or more different constituent materials having different physical or chemical properties which do not merge in the finishing structure, i.e., the individual constituents retain their properties. In recent years, polymeric based composites materials are being used in many application such as automotive, sporting goods, marine, electrical, industrial, construction, household appliances, etc Polymeric composites have high strength and stiffness, light weight, and high corrosion In metal matrix composites, the matrix is a ductile metal or alloy and the reinforcing medium is f carbon, silicon carbide, boron and alumina. Discontinuous reinforcement includes silicon carbide whiskers, chopped fibers of carbon and alumina, particulates of silicon carbide In ceramic matrix composites, particulates, fibers or of one ceramic material are embedded into the matrix of another ceramic material. These ceramic composites have improved fracture toughness and high stress application compared to the ceramic In engineering and material science, composites are defined as physical mixtures of chemically different materials that are insoluble in each other and are thus present as distinct phases: usually a continuous phase @ IJTSRD | Available Online @ www.ijtsrd.com www.ijtsrd.com | Volume – 2 | Issue – 6 | Sep-Oct 2018 Oct 2018 Page: 570

2. International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456 International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456 International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456-6470 meant for high temperature applications like heat shield of re-entry spacecrafts. III. GRAPHENE Graphene is a semi-metal with small overlap between the valence and the conduction bands. It is an allotrope (form) of carbon consisting of a single layer of carbon atoms arranged in a hexagonal lattice. It is the basic structural element of many other allotropes of carbon, such as graphite, diamond, charcoal, carbon nanotubes and fullerenes. Graphene has many interesting properties strongest material ever tested, efficiently conducts heat and electricity, and is nearly transparent. Graphene shows a large and nonlinear diamagnetism, greater than that of graphite. Graphene has a theoretical specific surface area (SSA) of 2630 m2/g. This is much larger than that reported for carbon black (smaller than 900 m2/g) or for carbon nanotubes (from ≈100 to 1000 m2/g) and is similar to activated carbon. Applications of graphene include lightweight, thin, flexible materials, lightweight electric/photonics circuits, solar cells, and various medical, chemical and industrial processes enhanced or enabled by the use of new graphene materials. IV. EPOXY RESIN Epoxy resins are low molecular weight pre or higher molecular weight polymers which normally contain at least two epoxide groups. The epoxide group is also sometimes referred to as a glycidyl or oxirane group. As with other classes of polymer materials, blending different grades of epoxy resin, as well as use of additives, plasticizers or fillers is common to achieve the desired processing or final properties, or to reduce cost. Use of blending, additives and fillers is often referred to as formulating. The applications for epoxy-based materials are extensive and include coatings, adhesives and composite materials such as those using carbon fiber and fiberglass reinforcements. The chemistry of epoxies and the range of commercially available variations allow cured polymers to be produced with a very broad range of properties. In general, epoxies are known for their excellent adhesion, chemical and heat resistance, good mechanical properties and electrical insulating properties. Many properties of epoxies can be modified by adding the modifiers. In the composite production, epoxy is used as a structural matrix production, epoxy is used as a structural matrix temperature applications like heat terial which is then reinforced by fiber. Typical fiber reinforcements include glass, carbon, Kevlar, material which is then reinforced by fiber. Typical fiber reinforcements include glass, carbon, Kevlar, and boron. V. LITERATURE REVIEW A literature review has been carried out about the recent applications in the field of Epoxy, Graphene composites with emphasis on new processing techniques and novel applications of the composite material Mahesh et al. [1]studied hybrid graphene carbon nanotube reinforced epoxy composites fabricated with different weight fraction of the reinforcements. The composites are subjected to hardness test as well as tensile test. The mechanical properties of these composites are investigated and increase in hardness and young’s modulus with increased weight fraction of the reinforcements is observed. Mahesh et al., [2] developed carbon nanotube reinforced epoxy hybrid materials for enhanced wear resistance. The reinforcement of carbon nanotube showed positive effect on the wear resistance of the composite. The wear rate decreased with increased weight fractions of the reinforcements. Czél, Jalalvand and Wisnom, approach for eliminating stress concentration in tensile and compressive testing of unidirectional Epoxy-carbon composites, an hybrid specimen is proposed to reduce the stress concentration at the grips of the testing apparatus and to protect the underlying composite from failure. The developed specimen produced consistent gauge sections. Leopold et al., [4] studied the size effect of unmodified and Graphene nanoparticle modified matrix, fibres is experimentally investigated. Neat matrix fibres show a clear size effect of increasing tensile strength with decreasing volume due to a statistical defect distribution. modified matrix shows no significant size effect.. The maximum stress in specimen of small volume depends on Graphene layer orientation, so that ideally, the covalent bonds of the nanoparticles should be orientated in loading direction. Ervina, Mariatti and Hamdan, filler loading on the tensile properties of Multi Carbon Nanotube and Graphene nanopowder filled Carbon Nanotube and Graphene nanopowder filled LITERATURE REVIEW A literature review has been carried out about the recent applications in the field of Epoxy, Graphene mphasis on new processing techniques and novel applications of the composite metal with small overlap between the valence and the conduction bands. It is an allotrope (form) of carbon consisting of a single layer anged in a hexagonal lattice. It is the basic structural element of many other allotropes of carbon, such as graphite, diamond, charcoal, studied hybrid graphene multiwall interesting properties. It is the efficiently conducts carbon nanotube reinforced epoxy composites fabricated with different weight fraction of the reinforcements. The composites are subjected to s well as tensile test. The mechanical properties of these composites are investigated and increase in hardness and young’s modulus with increased weight fraction of the reinforcements is heat and electricity, and is nearly transparent. Graphene shows a large and nonlinear diamagnetism, greater than that of graphite. Graphene has a theoretical specific surface area (SSA) of 2630 m2/g. ted for carbon black (smaller than 900 m2/g) or for carbon nanotubes 100 to 1000 m2/g) and is similar to activated carbon. Applications of graphene include lightweight, thin, flexible materials, lightweight electric/photonics and various medical, chemical and industrial processes enhanced or enabled by the use of developed carbon nanotube reinforced epoxy hybrid materials for enhanced wear resistance. The reinforcement of carbon nanotube showed positive effect on the wear resistance of the composite. The wear rate decreased with increased einforcements. Epoxy resins are low molecular weight pre-polymers or higher molecular weight polymers which normally oxide groups. The epoxide group is also sometimes referred to as a glycidyl or oxirane group. As with other classes of thermo set polymer materials, blending different grades of epoxy resin, as well as use of additives, plasticizers or fillers achieve the desired processing or final properties, or to reduce cost. Use of blending, additives and fillers is often referred to as Czél, Jalalvand and Wisnom, [3] proposed a novel approach for eliminating stress concentration in tensile and compressive testing of unidirectional carbon composites, an hybrid specimen is proposed to reduce the stress concentration at the ratus and to protect the underlying composite from failure. The developed specimen produced consistent gauge sections. died the size effect of unmodified and Graphene nanoparticle modified matrix, fibres is experimentally investigated. Neat matrix fibres show a clear size effect of increasing tensile strength with decreasing volume due to a statistical defect distribution. The nanoparticle modified matrix shows no significant size effect.. The maximum stress in specimen of small volume depends on Graphene layer orientation, so that ideally, the covalent bonds of the nanoparticles should be orientated in loading direction. based materials are extensive and include coatings, adhesives and rials such as those using carbon fiber and fiberglass reinforcements. The chemistry of epoxies and the range of commercially available variations allow cured polymers to be produced with a very broad range of properties. In general, epoxies are heir excellent adhesion, chemical and heat resistance, good mechanical properties and electrical insulating properties. Many properties of epoxies can be modified by adding the modifiers. In the composite Ervina, Mariatti and Hamdan, [5] studied the effect of filler loading on the tensile properties of Multi-walled @ IJTSRD | Available Online @ www.ijtsrd.com www.ijtsrd.com | Volume – 2 | Issue – 6 | Sep-Oct 2018 Oct 2018 Page: 571

3. International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456 International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456 International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456-6470 Epoxy Composites, In this work, multi- nanotube (MWCNT) and Graphene nanopowders (GNP) filled Epoxy composites were fabricated via ultrasonication and casting method. The experimental results prove that the strength and modulus of filler (MWCNT and GNP) filled epoxy composites ar lower as compared to clean epoxy. However, the addition of GNP at 0.8 vol% had slightly increased the composite tensile approximately. Thus, in general it indicates that the addition of filler (MWCNT and GNP) had reduced the mechanical properties of Epoxy composites. Shi et al., [6] calculated the Influence of microstructural features on thermal expansion coefficient in Graphene/Epoxy Theoretical calculations were conducted to determine the coefficient of thermal expansion (CTE). The influences of microstructural investigated. Calculated results demonstrated strong anisotropy of CTE when all Graphene sheets in the composite were aligned in the in-plane direction due to the large difference between the elastic moduli of the graphene and epoxy. Lu et al., [7] made a comparison of the elastic properties of graphene and fullerene reinforced polymer composites with varying filler size and morphology. By systematically concentration, morphology, and size, they clearly identified clear trends in composite stiffness with reinforcement. Spherical fullerenes provided a nearly size-independent level of reinforcement. In contrast, two-dimensional graphene flakes induce a strongly size-dependent response. Leopold et al., [8] calculated the Influence of carbon nanoparticle modification on the mechanical and electrical properties of epoxy in small volumes. Three types of particles, representing spherical, tubular and layered morphologies are used. A clear size effect of increasing true failure strength with decreasing volume is found for neat and carbon black modified epoxy. The results show the possibility to detect internal damage in small volumes by measuring electrical resistance and therefore indicate to the high potential for using carbon nano tube modified polymers in fibre reinforced multifunctional, self-monitoring improved mechanical properties. -walled carbon Hallad et al.,[9] investigated the behaviour of a polymer matrix beam reinforced with graphene and carbon fibres at nano and micro level reinforcements, respectively, to study the strength aspects for structural applications. Reinforcement of polymer beams with graphene alone by weight of the polymer matrix showed enhanced results when compared to carbon fibres alone, while the use of combined nano and micro reinforcements showed performance lying in between nano and micro fi Scanning electron microscopy and energy dispersion X-ray spectroscopy was conducted to examine the interfacial surface adhesion between the fillers and the polymer matrix. Jarosinski et al., [10] examined the possibility of increasing the thermal conductivity of the filled epoxy resin systems, applicable for el the use of composites filled with graphene nanoplatelets. It is remarkable that the addition of only 4 wt.% of graphene could lead to 132 % increase in thermal conductivity. The obtained results show potential for application nanocomposites for electrical enhanced thermal conductivity. Jiang et al., [11] developed Composites of epoxy/graphene modified diamond filler f thermal conductivity and high electrical insulation. Performance of the epoxy was improved by incorporating diamond microparticles that were covered with few-layer graphene sheets on surfaces it not only improved dispersion of diamond in the polymer matrix but it also decreased the interfacial thermal resistance between the diamond and Epoxy while preserving an excellent electrical insulation. Gresil et al., [12] studied the thermal diffusivity mapping of graphene Based polymer nanocomposites. Majidian et al., [13] evaluated the role of the particle size, polydispersity in the electrical conductivity of carbon nanotube- Epoxy composites. Zabihi et al., [14] proposed a new method of large scale manufacturing of engineered graphene like nanomaterials for development of high polymer nanocomposites. Th and cost-effective approach to scalable production of functionalized graphite nanoplatelets using “kitchen blender” approach and Diels-Alder chemistry. investigated the behaviour of a nanotube (MWCNT) and Graphene nanopowders (GNP) filled Epoxy composites were fabricated via ultrasonication and casting method. The experimental results prove that the strength and modulus of filler (MWCNT and GNP) filled epoxy composites are lower as compared to clean epoxy. However, the addition of GNP at 0.8 vol% had slightly increased the composite tensile Thus, in general it indicates that the addition of filler (MWCNT and GNP) had reduced the properties of Epoxy composites. polymer matrix beam reinforced with graphene and carbon fibres at nano and micro level reinforcements, respectively, to study the strength aspects for . Reinforcement of polymer beams with graphene alone by weight of the polymer matrix showed enhanced results when compared to carbon fibres alone, while the use of combined nano and micro reinforcements showed performance lying in between nano and micro fillers in the polymer. Scanning electron microscopy and energy dispersion ray spectroscopy was conducted to examine the interfacial surface adhesion between the fillers and the modulus modulus which which was was calculated the Influence of microstructural features on thermal expansion coefficient in Graphene/Epoxy calculations were conducted to determine the coefficient of thermal expansion (CTE). The influences of microstructural investigated. Calculated results demonstrated strong anisotropy of CTE when all Graphene sheets in the composite composites. examined the possibility of increasing the thermal conductivity of the filled epoxy resin systems, applicable for electrical insulation, by the use of composites filled with graphene nanoplatelets. It is remarkable that the addition of only 4 wt.% of graphene could lead to 132 % increase in thermal conductivity. The obtained results show potential for application nanocomposites for electrical enhanced thermal conductivity. features features were were plane direction due to the large difference between the elastic moduli of of of the the insulation graphene insulation with with made a comparison of the elastic properties of graphene and fullerene reinforced polymer composites with varying filler size and morphology. By systematically concentration, morphology, and size, they clearly identified clear trends in composite stiffness with reinforcement. Spherical fullerenes provided a nearly independent level of reinforcement. In contrast, developed Composites of epoxy/graphene modified diamond filler for enhanced thermal conductivity and high electrical insulation. Performance of the epoxy was improved by incorporating diamond microparticles that were layer graphene sheets on surfaces it not only improved dispersion of diamond in the lymer matrix but it also decreased the interfacial thermal resistance between the diamond and Epoxy while preserving an excellent electrical insulation. vary varying filler uce a strongly calculated the Influence of carbon nanoparticle modification on the mechanical and electrical properties of epoxy in small volumes. Three les, representing spherical, tubular and layered morphologies are used. A clear size effect of increasing true failure strength with decreasing volume is found for neat and carbon black modified epoxy. The results show the possibility to detect mage in small volumes by measuring electrical resistance and therefore indicate to the high potential for using carbon nano tube modified polymers in fibre reinforced monitoring studied the thermal diffusivity mapping of graphene Based polymer nanocomposites. evaluated the role of the particle size, polydispersity in the electrical conductivity of Epoxy composites. proposed a new method of large scale manufacturing of engineered graphene like nanomaterials for development of high-performance polymer nanocomposites. They introduced a quick effective approach to scalable production of functionalized graphite nanoplatelets using “kitchen plastics material material plastics as as a a with with Alder chemistry. @ IJTSRD | Available Online @ www.ijtsrd.com www.ijtsrd.com | Volume – 2 | Issue – 6 | Sep-Oct 2018 Oct 2018 Page: 572

4. International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456 International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456 International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456-6470 Watson et al., [15] studied the Tensile and Flexural Properties of Hybrid graphene oxide / epoxy carbon fibre reinforced composites. Nano sized graphene oxide sheets were homogenously dispersed via sonication methods in Epoxy followed by vacuum resin infusion for the fabrication of the epoxy, graphene oxide (GO) and micro-sized carbon fibre reinforced nanocomposites (EP/CF/GO). graphene oxide concentrations ranging from 0.1 were studied to investigate the effect on tensile and flexural strength. It was observed that the tensile strength of the EP/CF decreased with the addition of GO but increased with GO weight concentration for the inclusion of 0.1 to 0.5 wt.% GO respectively. Ramos-Galicia et al., [16] studied the enhancement of mechanical properties nanocomposites. Two types of Epoxy composite were developed which are epoxy /graphene nanocomposite and epoxy/modified graphene nanocomposite. The fabrication of graphene was going through thermal expansion and sonication modification was only done for modified graphene where Methylene diphenyl diisocyanate (MDI) is used. The mechanical nanocomposite, such as Young’s modulus and maximum stress were investigated, for maximum stress, neat Epoxy showed the best result compared to both nanocomposite due to the changes of material properties when adding the filler into the matrix. Zhang et al., [17] developed a novel method for preparing polymer/graphene oxide nanocomposites by using two-step strategy composed of in situ polymerization and melt process. Pickering emulsion templated polystyrene (PS)/graphene oxide (GO) composite microspheres were prepared using surface functionalized silica as the stabilizer. These preformed polymer/GO composite microspheres were then melt-blended into polymer matrix to prepare nanocomposite ma- terials in a short minute using HAAKE torque rheometer. VI. CONCLUSION From the above literature survey it is clear that the polymer composites’ applications are increasing rapidly, and graphene as a novel material is being used extensively in newer applications. Graphene as a filler material significantly improves the proper the composite material developed. Although multiple extensive researches are being carried out in the field extensive researches are being carried out in the field studied the Tensile and Flexural of polymer graphene composites the applications are of polymer graphene composites the applications are ever increasing. VII. REFERENCES 1.V. M. Mahesh, B. K. Muralidhara, and R. George, “Influence of Different Nanomaterial on The Mechanical Properties Composites -A Comparative Study,” Res. Sci. Eng. Technol. (An ISO Certif. Organ. vol. 3297, no. 7, 2007. 2.V. M. Mahesh, B. K. Muralidhara, R. George, and Trisha. K, “Study of Wear Test on Hybrid Material Reinforced Epoxy Based Composites,” Int. J. Res. Advent Technol. 2321–9637, 2014. 3.G. Czél, M. Jalalvand, and M. R. Wisnom, “Hybrid specimens concentrations in tensile and compressive testing of unidirectional composites,” Volume 91, Part 2, pp.436 4.C. Leopold, W. V. Liebig, H. Wittich, and B. Fiedler, “Size effect of graphene nanoparticle modified epoxy matrix,” vol. 134, pp. 217–225, Oct. 2016. 5.J. Ervina, M. Mariatti, and S. Hamdan, “Effect of Filler Loading on the Tensile Properties of Multi walled Carbon Nanotube Nanopowder filled Epoxy Composites,” Chem., vol. 19, no. 19, pp. 897 6.Z. Shi et al., “Influence of mi on thermal expansion graphene/epoxy composites,” 2016. 7.C.-T. Lu, A. Weerasinghe, D. Maroudas, and A. Ramasubramaniam, “A Comparison of the Elastic Properties of Graphene- and Fullerene Polymer Composites: The Role of Filler Morphology and Size,” Nat. Publ. Gr. 8.C. Leopold, T. Augustin, T. Schwebler, J. Lehmann, W. V Liebig, and B. Fiedler, “Influence of carbon nanoparticle modification on the mechanical and electrical properties of epox small volumes,” J. Colloid Interface Sci. pp. 620–632, 2017. 9.S. A. Hallad et al., “Experimental investigation for graphene and carbon fibre in polymer matrix for structural applications,” Technol., vol. 15, no. 3, pp. 29 , vol. 15, no. 3, pp. 297–302, Jun. 2017. Properties of Hybrid graphene oxide / epoxy carbon fibre reinforced composites. Nano sized graphene mogenously dispersed via sonication methods in Epoxy followed by vacuum resin infusion for the fabrication of the epoxy, esh, B. K. Muralidhara, and R. George, “Influence of Different Nanomaterial on The Mechanical Properties A Comparative Study,” Int. J. Innov. Res. Sci. Eng. Technol. (An ISO Certif. Organ., sized carbon fibre Of Of Epoxy Epoxy Matrix Matrix reinforced nanocomposites (EP/CF/GO). graphene oxide concentrations ranging from 0.1 – 0.5 wt. % were studied to investigate the effect on tensile and flexural strength. It was observed that the tensile strength of the EP/CF decreased with the addition of GO but increased with GO weight concentration for B. K. Muralidhara, R. George, and Trisha. K, “Study of Wear Test on Hybrid Material Reinforced Epoxy Based Composites,” Int. J. Res. Advent Technol., vol. 2, no. 12, pp. respectively. studied the enhancement of properties nanocomposites. Two types of Epoxy composite were G. Czél, M. Jalalvand, and M. R. Wisnom, “Hybrid specimens concentrations in tensile and compressive testing of unidirectional composites,” Compos. Part A, pp.436-447, Dec. 2016. mechanical of of epoxy/graphene epoxy/graphene eliminatin eliminating stress ene nanocomposite and epoxy/modified graphene nanocomposite. The fabrication of graphene was going through thermal expansion and sonication modification was only done for modified graphene where Methylene diphenyl diisocyanate (MDI) is ed. The mechanical nanocomposite, such as Young’s modulus and maximum stress were investigated, for maximum stress, neat Epoxy showed the best result compared to both nanocomposite due to the changes of material e filler into the matrix. process. process. Chemical Chemical C. Leopold, W. V. Liebig, H. Wittich, and B. Fiedler, “Size effect of graphene nanoparticle Compos. Sci. Technol., 225, Oct. 2016. properties properties of of both both J. Ervina, M. Mariatti, and S. Hamdan, “Effect of Filler Loading on the Tensile Properties of Multi- walled Carbon Nanotube Nanopowder filled Epoxy Composites,” Procedia , vol. 19, no. 19, pp. 897–905, 2016. and and Graphene Graphene developed a novel method for , “Influence of microstructural features thermal expansion graphene/epoxy composites,” Heliyon, vol. 2, preparing polymer/graphene oxide nanocomposites by step strategy composed of in situ polymerization and melt process. Pickering emulsion- templated polystyrene (PS)/graphene oxide (GO) on coefficient coefficient in in T. Lu, A. Weerasinghe, D. Maroudas, and A. Ramasubramaniam, “A Comparison of the Elastic and Fullerene-Reinforced er Composites: The Role of Filler Nat. Publ. Gr., 2016. pared using surface- functionalized silica as the stabilizer. These preformed polymer/GO composite microspheres were blended into polymer matrix to prepare terials in a short minute using C. Leopold, T. Augustin, T. Schwebler, J. Lehmann, W. V Liebig, and B. Fiedler, “Influence of carbon nanoparticle modification on the mechanical and electrical properties of epoxy in J. Colloid Interface Sci., vol. 506, From the above literature survey it is clear that the polymer composites’ applications are increasing rapidly, and graphene as a novel material is being used extensively in newer applications. Graphene as a filler material significantly improves the properties of the composite material developed. Although multiple , “Experimental investigation for graphene and carbon fibre in polymer-based matrix for structural applications,” J. Appl. Res. @ IJTSRD | Available Online @ www.ijtsrd.com www.ijtsrd.com | Volume – 2 | Issue – 6 | Sep-Oct 2018 Oct 2018 Page: 573

5. International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456 International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456 International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456-6470 10.L. Jarosinski, A. Rybak, K. Gaska, G. Kmita, R. Porebska, and C. Kapusta, “Enhanced thermal conductivity of graphene nanoplatelets epoxy composites,” Mater. Sci., vol. 35, no. 2, pp. 382 389, 2017. 11.J. Jiang, F. Liu, K. Zhuang, D. Chen, an “Composites of diamond filler show conductivity and high electrical insulation,” Adv., 2017. 12.M. Gresil, Z. Wang, Q.-A. Poutrel, and C. Soutis, “Thermal Diffusivity Mapping of Graphene Based Polymer Nanocomposites,” Sci. Rep. 13.M. Majidian, C. Grimaldi, L. Forró, and A. Magrez, “Role of the particle size polydispersity in the electrical conductivity of carbon nanotube epoxy composites,” Sci. Rep., 2017. 14.O. Zabihi, M. Ahmadi, T. Abdollahi, S. Nikaf and M. Naebe, “Collision-induced activation: L. Jarosinski, A. Rybak, K. Gaska, G. Kmita, R. Porebska, and C. Kapusta, “Enhanced thermal conductivity of graphene nanoplatelets epoxy , vol. 35, no. 2, pp. 382– Towards industrially scalable approach to graphite nanoplatelets functionalization polymer nanocomposites,” 15.G. Watson, K. Starost, P. Bari, N. Faisal, S. Mishra, and J. Njuguna, “Tensile and Flexural Properties of Hybrid Graphene Oxide / Epoxy Carbon Fibre Reinforced Composites,” Ser. Mater. Sci. Eng., vol. 195, no. 1, p. 12009, May 2017. 16.L. Ramos-Galicia et al. mechanical properties nanocomposite,” J. Phys. Conf. Ser. Pap. 17.L. Zhang, S. Tu, H. Wang, and Q. Du, “Preparation of polymer/graphene nanocomposites by a two- of in situ polymerization a Compos. Sci. Technol., vol. 154, pp. 1 2018. Towards industrially scalable approach to graphite nanoplatelets functionalization polymer nanocomposites,” Sci. Rep., 2017. for for superior superior G. Watson, K. Starost, P. Bari, N. Faisal, S. a, “Tensile and Flexural Properties of Hybrid Graphene Oxide / Epoxy Carbon Fibre Reinforced Composites,” IOP Conf. , vol. 195, no. 1, p. 12009, J. Jiang, F. Liu, K. Zhuang, D. Chen, and G. Chen, “Composites of epoxy/graphene-modified- diamond filler conductivity and high electrical insulation,” rsc epoxy/graphene enhanced show enhanced thermal thermal et al., “Enhancement of properties J. Phys. Conf. Ser. Pap., 2017. A. Poutrel, and C. Soutis, mechanical of of epoxy/graphene epoxy/graphene “Thermal Diffusivity Mapping of Graphene Based Sci. Rep., 2017. L. Zhang, S. Tu, H. Wang, and Q. Du, “Preparation of polymer/graphene M. Majidian, C. Grimaldi, L. Forró, and A. Magrez, “Role of the particle size polydispersity in the electrical conductivity of carbon nanotube- oxide oxide -step strategy composed of in situ polymerization and melt processing,” , vol. 154, pp. 1–7, Jan. , 2017. O. Zabihi, M. Ahmadi, T. Abdollahi, S. Nikafshar, induced activation: @ IJTSRD | Available Online @ www.ijtsrd.com www.ijtsrd.com | Volume – 2 | Issue – 6 | Sep-Oct 2018 Oct 2018 Page: 574