1 / 17

- Generals for PED matters - Definition of pressure vessel and classes

PED (Pressure Equipment Directives ) Matters @ for XFEL (Some of them (!) that are related to Modules and Cavities) Axel Matheisen DESY. - Generals for PED matters - Definition of pressure vessel and classes - Who is who according to PED - Definition of pressure vessel + codes for XFEL

tbenton
Download Presentation

- Generals for PED matters - Definition of pressure vessel and classes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PED (Pressure Equipment Directives ) Matters @ for XFEL (Some of them (!) that are related to Modules and Cavities) Axel Matheisen DESY - Generals for PED matters - Definition of pressure vessel and classes - Who is who according to PED - Definition of pressure vessel + codes for XFEL - PED handling of the DESY/ XFEL cavities

  2. Generals for PED matters • In normal cases process is as follows - Check legal rules/ codes of areas where product will be operated (ASME, ISO; CE;..) Short excurse ASTM has extended range of tolerances in material  thicker walls ISO tight tolerances field on material and design  thinner walks possible - Define pressure vessel and operation conditions (See page 4) * Define maximum pressure, maximum temperature, the volume (for equipment and accessories) or the nominal diameter DN (for piping and accessories) * Check if additional information is required to be selected to determine possible exceptions to the classification tables (See later page 9) TTC Meeting 28.2-3.3 2011 Milano Italy Axel Matheisen DESY Hamburg WG -2

  3. Generals for PED matters cont. What else • Design according to legal PED rules • Select material; wall thicknesses; materials; weld joints… • Select licensed fabricators (welders qualification; QA systems etc. • Set up a quality control system • Set up documentation system for full traceability Delete this text and put in here: Date of the Talk, location, … (max: 1 line) Put in here: Name of the speaker, function, affiliation, … (max. 1 line)

  4. Definition of pressure vessel and classes • Input: Pressure; Temperature; Type (pipe or heat exchanger) ; Volume; Tube diameter • Conformist diagram • http://www.red-bag.com/jcms/index.php/free-online-engineering-tools/ped-classification TTC Meeting 28.2-3.3 2011 Milano Italy Axel Matheisen DESY Hamburg WG -2

  5. Definition of pressure vessel and classes TTC Meeting 28.2-3.3 2011 Milano Italy Axel Matheisen DESY Hamburg WG -2

  6. Who is who according to PED Define “who is who” Manufactures- Takes the risk for safe design Responsible for safety for pressure vessel Can/ has to fix sequences, materials and tests .. for a safe product. But guides the whole production and is the only one that can produce replicas of the product ! Manufacturing enterprise (fabricator)- Has to hold and guaranty all qualification's requested by the manufacturer Hast to follow strictly the directives of manufacturer Has to deliver all data from production requested. “Customer” location defines the PED code to be applied TTC Meeting 28.2-3.3 2011 Milano Italy Axel Matheisen DESY Hamburg WG -2

  7. Definition of pressure vessel and codes for XFEL General definition of the pressure vessel by PED “Pressure vessel is the volume that can not be sealed and insulated” From the XFEL lay out of tests and infrastructure 1st volume than can be insulated ONE module / string during test in module test at AMTF 2nd volume than can be insulated Linac/ coupling of modules (330 mm tube;2 phase HE lines;.. TTC Meeting 28.2-3.3 2011 Milano Italy Axel Matheisen DESY Hamburg WG -2

  8. Definition of pressure vessel and codes for XFEL Individual Module = KAT II TTC Meeting 28.2-3.3 2011 Milano Italy Axel Matheisen DESY Hamburg WG -2

  9. Definition of pressure vessel and codes for XFEL BUT XFEL Modules are coupled in the tunnel n times 256 L => Classification pressure vessel Kat IV From this it results that All pressure bearing components (Druckbehälter Bauteile) have to be fabricated and tested according to Kat IV (Cavities; He distribution tubes etc.) TTC Meeting 28.2-3.3 2011 Milano Italy Axel Matheisen DESY Hamburg WG -2

  10. Definition of pressure vessel and codes for XFEL Manufactures can select “Test Modules” We as manufacturer have selected Module B and F for the cavity production (we don’t hold a license as pressure device manufactures) TTC Meeting 28.2-3.3 2011 Milano Italy Axel Matheisen DESY Hamburg WG -2

  11. Definition of pressure vessel and codes for XFEL • + + + + + several pages • + + + + + several pages TTC Meeting 28.2-3.3 2011 Milano Italy Axel Matheisen DESY Hamburg WG -2

  12. PED handling of the DESY / XFEL cavities Consequences: Module B / Module B1 - Check all documents concerning design; calculation and fabrication - Cross check design by finite element calculations - Cross check fabricators manufacturing drawings on accordance with original design /drawings and FEM calculations • Cross check material for applicability • Cross check qualifications of companies; (welders; weld procedures,…) • Cross check accordance and fabrication on test objects by destructive and non destructive test TTC Meeting 28.2-3.3 2011 Milano Italy Axel Matheisen DESY Hamburg WG -2

  13. PED handling of the DESY/ XFEL cavities # Cavity design does not base on the PED requirements # Cavity material and application temperature not in the PED Nb @ 2K NbTI @ 2K Ti @2K # Kat.IV  cut complete cavities for analysis # Material qualification test apparatus not applicable (Yield- an tensile tests and Impact test at 2 K) # Material tests for serial production at low temperatures do not exist in industry TTC Meeting 28.2-3.3 2011 Milano Italy Axel Matheisen DESY Hamburg WG -2

  14. PED handling of the DESY/ XFEL cavities Way out for DESY • Operational experiences over 15 years • About 160 cavities build  long term experiences in cold operation • Experiences on pressure + crash test @ 2K on Cavity C 26 and Module 3* • Traceability of drawings, fabrication, materials and preparation Produce accordingly to the experiences! No changes are allowed Full traceability has to be given Install notified body installed for tests and proves TTC Meeting 28.2-3.3 2011 Milano Italy Axel Matheisen DESY Hamburg WG -2

  15. PED handling of the DESY/ XFEL cavities PED Module B / B1 for the XFEL Cavities - DESY is defined as the manufacturer - Fabricate a “test piece” (pre production welding test acc. to ISO 15613) for destructive tests - Manufacture n Cavities with notified body on place and do non destructive testing on them (DCV - RCV cavities for XFEL Cavity production) - Set up PMA material for materials (as in use) and follow this PMA strictly! (PMA= Particular Material Appraisal Acc. PED(97/23/EC) annex I, Sec 4.2) - Perform a pressure test on completed cavity for each cavity build TTC Meeting 28.2-3.3 2011 Milano Italy Axel Matheisen DESY Hamburg WG -2

  16. PED handling of the DESY/ XFEL cavities Delete this text and put in here: Date of the Talk, location, … (max: 1 line) Put in here: Name of the speaker, function, affiliation, … (max. 1 line)

  17. PED handling of the DESY/ XFEL cavities Delete this text and put in here: Date of the Talk, location, … (max: 1 line) Put in here: Name of the speaker, function, affiliation, … (max. 1 line)

More Related