1 / 53

Chapter 17 Additional Aspects of Aqueous Equilibria

Chemistry, The Central Science , 10th edition Theodore L. Brown; H. Eugene LeMay, Jr.; and Bruce E. Bursten. Chapter 17 Additional Aspects of Aqueous Equilibria. John D. Bookstaver St. Charles Community College St. Peters, MO 2006, Prentice Hall, Inc . Modified by S.A. Green, 2006.

tavia
Download Presentation

Chapter 17 Additional Aspects of Aqueous Equilibria

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chemistry, The Central Science, 10th edition Theodore L. Brown; H. Eugene LeMay, Jr.; and Bruce E. Bursten Chapter 17Additional Aspects of Aqueous Equilibria John D. Bookstaver St. Charles Community College St. Peters, MO 2006, Prentice Hall, Inc. Modified by S.A. Green, 2006

  2. Control of solution composition Chap 16: What is the pH after adding X to water? Chap 17:How can we control the pH of a solution?How can we determine acid/base concentration? Chap 4:Solubility of ionic compounds. Chap 17:How soluble are they? Buffers Titrations Ksp=solubility product

  3. The Common-Ion Effect • Consider a solution of acetic acid: • If acetate ion (CH3O2-) is added to the solution, Le Châtelier says the equilibrium will shift to the left <––. Where can we get CH3O2- ions?

  4. The Common-Ion Effect Where can we get CH3O2- ions? Add them in the form of a salt: The salt completely dissociates. So, adding the salt = adding CH3O2- (acetate) ions. What happens to the pH?

  5. The Common-Ion Effect Calculate the pH of a 1.0 L solution containing 0.30 moles of acetic acid, C2H3O2H, and 0.30 moles of sodium acetate C2H3O2Na, at 25°C. Ka for acetic acid at 25°C is 1.8  10-5.

  6. The Common-Ion Effect Use the same method as in Chapter 16: ICE + equilibrium expression But, adjust initial concentrations to account for the salt.

  7. The Common-Ion Effect Use the ICE table:

  8. The Common-Ion Effect Suppose x is small relative to 0.30: Ka= x 1.8  10-5 = x = [H+] pH=–log(1.8  10-5)=4.74 Check: is approximation ok?

  9. The Common-Ion Effect: Buffering Note: When [HA] = [A-] then: [H3O+] = Ka When [H3O+] is small compared to [HA] & [A-] then [H3O+] = Ka times the ratio [HA]/[A-]

  10. Buffers: • Solutions of a weak conjugate acid-base pair. • They are particularly resistant to pH changes, even when strong acid or base is added.

  11. Buffers If a small amount of hydroxide is added to an equimolar solution of HF and NaF, for example, the HF reacts with the OH– to make F– and water.

  12. Buffers If acid is added, the F– reacts to form HF and water.

  13. Ka = [H3O+] [A−] [HA] HA + H2O H3O+ + A− Buffer Calculations Consider the equilibrium constant expression for the dissociation of a generic acid, HA:

  14. [A−] [HA] [H3O+] Ka = base [A−] [HA] –log [H3O+] + −log –log Ka = pKa acid pH Buffer Calculations Rearranging slightly, this becomes Taking the negative log of both side, we get

  15. [base] [acid] pKa = pH –log [base] [acid] pH = pKa + log Buffer Calculations • So • Rearranging, this becomes • This is the Henderson–Hasselbalch equation.

  16. Henderson–Hasselbalch Equation What is the pH of a buffer that is 0.12 M in lactic acid, HC3H5O3, and 0.10 M in sodium lactate? Ka for lactic acid is1.4  10-4.

  17. [base] [acid] (0.10) (0.12) pH = pKa + log pH = –log (1.4  10-4) + log Henderson–Hasselbalch Equation pH = 3.85 + (–0.08) pH = 3.77

  18. pH Range • The pH range is the range of pH values over which a buffer system works effectively. • It is best to choose an acid with a pKa close to the desired pH.

  19. When Strong Acids or Bases Are Added to a Buffer… …it is safe to assume that all of the strong acid or base is consumed in the reaction.

  20. Addition of Strong Acid or Base to a Buffer • Determine how the neutralization reaction affects the amounts of the weak acid and its conjugate base in solution. • Use the Henderson–Hasselbalch equation to determine the new pH of the solution.

  21. Calculating pH Changes in Buffers A buffer is made by adding 0.300 mol HC2H3O2 and 0.300 mol NaC2H3O2 to enough water to make 1.00 L of solution. The pH of the buffer is 4.74. Calculate the pH of this solution after 0.020 mol of NaOH is added.

  22. Calculating pH Changes in Buffers Before the reaction, since mol HC2H3O2 = mol C2H3O2– pH = pKa = –log (1.8  10-5) = 4.74

  23. Calculating pH Changes in Buffers The 0.020 mol NaOH will react with 0.020 mol of the acetic acid: HC2H3O2(aq) + OH-(aq) C2H3O2-(aq) + H2O(l)

  24. (0.320) (0. 200) pH = 4.74 + log Calculating pH Changes in Buffers Now use the Henderson–Hasselbalch equation to calculate the new pH: pH = 4.74 + 0.06 pH = 4.80

  25. Titration A known concentration of base (or acid) is slowly added to a solution of acid (or base).

  26. Titration A pH meter or indicators are used to determine when the solution has reached the equivalence point, at which the stoichiometric amount of acid equals that of base. Equiv point: moles acid=moles base

  27. Titrations Why titrate? How much acid or base is present . What is pKa (pKb) of weak acid (base). (we will not do this) Types: 1. “strong-strong” Strong acid + strong base Strong base + strong acid 2. “weak-strong” Weak acid + strong base Weak base + strong acid Usual question asked: What is the pH after X mL of Y has been added?

  28. Titration of a Strong Acid with a Strong Base From the start of the titration to near the equivalence point, the pH goes up slowly.

  29. Titration of a Strong Acid with a Strong Base Just before and after the equivalence point, the pH increases rapidly. --> transition from acidic to basic state

  30. Titration of a Strong Acid with a Strong Base At the equivalence point: moles acid = moles base. pH=7 The solution contains only water and the salt from the cation of the base and the anion of the acid.

  31. Titration of a Strong Acid with a Strong Base As more base is added, the increase in pH again levels off. Movie….

  32. Titration of a Weak Acid with a Strong Base • Unlike in the previous case, the conjugate base of the acid affects the pH. • The pH at the equivalence point is >7. Phenolphthalein is commonly used as an indicator in these titrations.

  33. Titration of a Weak Acid with a Strong Base Before the equivalence point: the pH of the solution during titration is determined from the amounts of the acid and its conjugate base present.

  34. Titration of a Weak Acid with a Strong Base With weaker acids, the initial pH is higher and pH changes near the equivalence point are more subtle.

  35. Titration of a Weak Base with a Strong Acid • The pH at the equivalence point in these titrations is < 7. • Methyl red is the indicator of choice.

  36. SAMPLE EXERCISE 17.7Calculating pH for a Weak Acid–Strong Base Titration Calculate the pH of the solution formed when 45.0 mL of 0.100 M NaOH is added to 50.0 mL of 0.100 M HC2H3O2 (Ka = 1.8  10–5). Solution Write reaction Ask: Is this strong-strong or weak-strong titration? Are we before, at, or after equivalence point? Need to find: # moles of weak acid present initially # moles of base added Concentrations of acid and conjugate base

  37. The 4.50  10–3 mol of NaOH consumes 4.50  10–3 mol of HC2H3O2: SAMPLE EXERCISE 17.7Calculating pH for a Weak Acid–Strong Base Titration Calculate the pH of the solution formed when 45.0 mL of 0.100 M NaOH is added to 50.0 mL of 0.100 M HC2H3O2 (Ka = 1.8  10–5). Need to find: # moles of weak acid present initially # moles of base added Concentrations of acid and conjugate base

  38. SAMPLE EXERCISE 17.7 continued The total volume of the solution is The resulting molarities of HC2H3O2 and C2H3O2– after the reaction are therefore Equilibrium Calculation: The equilibrium between HC2H3O2 and C2H3O2– must obey the equilibrium-constant expression for HC2H3O2: Solving for [H+] gives Calculate the pH of the solution formed when 45.0 mL of 0.100 M NaOH is added to 50.0 mL of 0.100 M HC2H3O2 (Ka = 1.8  10–5).

  39. Titrations of Polyprotic Acids In these cases there is an equivalence point for each dissociation.

  40. BaSO4(s) Ba2+(aq) + SO42-(aq) Solubility Products Consider the equilibrium that exists in a saturated solution of BaSO4 in water:

  41. Solubility Products The equilibrium constant expression for this equilibrium is Ksp = [Ba2+] [SO42-] where the equilibrium constant, Ksp, is called the solubility product.

  42. Solubility Products • Ksp is not the same as solubility. • Solubility is generally expressed as the mass of solute dissolved in 1 L (g/L) or 100 mL (g/mL) of solution, or in mol/L (M).

  43. BaSO4(s) Ba2+(aq) + SO42-(aq) Factors Affecting Solubility • The Common-Ion Effect • If one of the ions in a solution equilibrium is already dissolved in the solution, the equilibrium shifts to the left and the solubility of the salt decreases.

  44. Factors Affecting Solubility • pH • If a substance has a basic anion, it is more soluble in an acidic solution. • Substances with acidic cations are more soluble in basic solutions.

  45. Factors Affecting Solubility • Complex Ions • Metal ions can act as Lewis acids and form complex ions with Lewis bases in the solvent.

  46. Factors Affecting Solubility • Complex Ions • The formation of these complex ions increases the solubility of these salts.

  47. Factors Affecting Solubility • Amphoterism • Amphoteric metal oxides and hydroxides are soluble in strong acid or base, because they can act either as acids or bases. • Examples of such cations are Al3+, Zn2+, and Sn2+.

  48. Will a Precipitate Form? • In a solution, • If Q = Ksp, the system is at equilibrium and the solution is saturated. • If Q < Ksp, more solid will dissolve until Q = Ksp. • If Q > Ksp, the salt will precipitate until Q = Ksp.

  49. Selective Precipitation of Ions One can use differences in solubilities of salts to separate ions in a mixture.

  50. Chapter 17 problems 17.22 A buffer is prepared by adding 5.0 g of NH3 and 20.0 g NH4+ to enough water to make 2.50 L of solution. pH=? (b) Write complete ionic equation for the reaction that occurs when a small amount of concentrated nitric acid is added.

More Related