1 / 7

Two Phase Pipeline Example

Two Phase Pipeline Example. Ref.: Brill & Beggs, Two Phase Flow in Pipes, 6 th Edition, 1991. Chapter 3. Two Phase Flow Example 1: Description. P 2. d 1 , L 1. D Z 1. P 1.

tassos
Download Presentation

Two Phase Pipeline Example

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Two Phase PipelineExample Ref.: Brill & Beggs, Two Phase Flow in Pipes, 6th Edition, 1991. Chapter 3.

  2. Two Phase FlowExample 1: Description P2 d1 , L1 DZ1 P1 • For the above two-phase pipeline, calculate the exit pressure (P2) based on the Beggs and Brill equation. Compare the manual calculation results with Hysys software results (using Pipe Segment and Pipesys) . • Feed specifications: • T1 = 60 oF, P1 = 1000 psia, qgtsc= 50 MMscfd, qosc=100000 bbl/day, γgt= 0.7896, γo = 31.3 oAPI, • Pipeline specifications: • L1 = 900 ft, ΔZ1 = 10 ft, d1= 12 in nominal (Mild Steel, Schedule 40), T2 = 60 oF

  3. Two Phase FlowExample 1: Description For using compositional model (in Hysys), the following analysis of produced oil and gas at standard conditions are exist:

  4. Two Phase FlowExample 1: solution In hand calculation, a single segment with Pav= P1 was used (for first iteration). I didn’t find any reliable correlation for calculation of dissolved gas specific gravity, and therefore the specific gravity of free gas was selected from HYSYS software at input conditions: γgf= 0.6397 Calculation of Rs and γgdneeds a try and error, based on these equations: Therefore:

  5. Two Phase FlowExample 1: solution Volume flow rate of free gas at inlet conditions can be calculated with using Bg: Viscosity of oil and gas and surface tension between them can be calculated as:

  6. Two Phase FlowExample 1: solution Therefore, the two-phase no slip properties can be calculated as follows: Flow regimes: Liquid Hold and ρs:

  7. Two Phase FlowExample 1: solution Pressure gradient due to friction: Outlet pressure:

More Related