1 / 21

MICROPHONES

MICROPHONES. Microphones. The first link in the audio chain. Try to capture a realistic sound – something that sounds like the instrument Sound quality can be affected by: the construction their sensitivity where they are placed. THE BASICS.

tasha
Download Presentation

MICROPHONES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MICROPHONES

  2. Microphones • The first link in the audio chain. • Try to capture a realistic sound – something that sounds like the instrument • Sound quality can be affected by: the construction their sensitivity where they are placed

  3. THE BASICS • Microphones are a type of transducer - a device which converts energy from one form to another. Microphones convert acoustical energy (sound waves) into electrical energy (the audio signal). • Different types of microphones have different ways of converting energy but they all share one thing in common: The diaphragm. This is a thin piece of material (such as paper, plastic or aluminum) which vibrates when it is struck by sound waves. In a typical hand-held mic like the one below, the diaphragm is located in the head of the microphone.

  4. Construction There are 3 basic construction types: • Dynamic Dynamic microphones are versatile and ideal for general-purpose use. They use a simple design with few moving parts. They are relatively sturdy and resilient to rough handling. They are also better suited to handling high volume levels, such as from certain musical instruments or amplifiers. They have no internal amplifier and do not require batteries or external power. • Condenser Condenser microphones require power from a battery or external source. The resulting audio signal is stronger signal than that from a dynamic. Condensers also tend to be more sensitive and responsive than dynamics, making them well-suited to capturing subtle nuances in a sound. • Ribbon Ribbon microphones are generally the most delicate and expensive microphone, but modern materials have been introduced that make present-day ribbon microphones durable enough for loud rock music and stage use. They are prized for their ability to capture high-frequency detail.

  5. Dynamic microphones • Most popular for live sound • Can handle high volume sound (EG drums. Amplifiers, and some rock vocalists) How it works The dynamic microphone uses a wire coil and magnet to create to create the audio signal. The diaphragm is attached to the coil. When the diaphragm vibrates in response to incoming sound waves, the coil moves backwards and forwards past the magnet. This creates a current in the coil which is channeled from the microphone along wires. A common configuration is shown to the right.

  6. Condenser microphones • Most popular for recording purposes • Sensitive, accurate but can be expensive. • Require a small amount of voltage 9 or 48 volts to function properly. This voltage is called phantom power. How it works Condenser means capacitor, an electronic component which stores energy in the form of an electrostatic field. A capacitor has two plates with a voltage between them. In the condenser mic, one of these plates is made of very light material and acts as the diaphragm. The diaphragm vibrates when struck by sound waves, changing the distance between the two plates and therefore changing the capacitance. Cross-Section of a Typical Condenser Microphone

  7. Ribbon microphones • A Ribbon microphone is a type of dynamic mic that uses a thin metal ribbon placed between the poles of a magnet and generate voltages by electromagnetic induction. • Have a unique sound though – often called ‘silky’ or ‘smooth’. How it works A current is induced at right angles to both the ribbon velocity and magnetic field direction. As the sound wave causes the ribbon to move, the induced current in the ribbon is proportional to the particle velocity in the sound wave. Basically the air movement associated with the sound, moves the metallic ribbon in the magnetic field, generating an imaging voltage between the ends of the ribbon which is proportional to the velocity of the ribbon.

  8. Polar patterns • Every microphone has a property known as directionality. This describes the microphone's sensitivity to sound from various directions. • To help understand a the directional properties of a particular microphone, user manuals and promotional material often include a graphical representation of the microphone's directionality. This graph is called a polar pattern. • There are three 3 main categories: Omni directionalPicks up sound evenly from all directions (omni means "all" or "every"). UnidirectionalPicks up sound predominantly from one direction. This includes cardioid and hypercardioid microphones. BidirectionalPicks up sound from two opposite directions.

  9. Omni directional • Uses: Capturing ambient noise; Situations where sound is coming from many directions; Situations where the mic position must remain fixed while the sound source is moving. • Not used for close-micing (less than 30cm) as too much background sound is picked up.

  10. Cardioid • Cardioid means "heart-shaped", which is the type of pick-up pattern these mics use. Sound is picked up mostly from the front, but to a lesser extent the sides as well. Uses: Emphasizing sound from the direction the mic is pointed whilst leaving some latitude for mic movement and ambient noise. • When used close-micing emphasizes bass frequencies. This is called the proximity effect and is found only on cardioid mics.

  11. Hypercardioid • This is exaggerated version of the cardioid pattern. It is very directional and eliminates most sound from the sides and rear. Due to the long thin design of hypercardioids, they are often referred to as shotgun microphones.Uses: Isolating the sound from a subject or direction when there is a lot of ambient noise; Picking up sound from a subject at a distance.

  12. Bidirectional • Uses a figure-of-eight pattern and picks up sound equally from two opposite directions. • Uses: As you can imagine, there aren't a lot of situations which require this polar pattern. One possibility would be an interview with two people facing each other (with the mic between them). • Capture sounds from the front and back, but not from the sides

  13. Variable Directionality • Some microphones allow you to vary the directional characteristics by selecting omni, cardioid or shotgun patterns. • This feature is sometimes found on video camera microphones, with the idea that you can adjust the directionality to suit the angle of zoom, e.g. have a shotgun mic for long zooms. • Some models can even automatically follow the lens zoom angle so the directionality changes from cardioid to shotgun as you zoom in. Notice on the RODE NT2-A A polar pattern selector from Figure 8 to Cardioid to Omni directional.

  14. Microphone Impedance • When dealing with microphones, one consideration which is often misunderstood or overlooked is the microphone's impedance rating. • A mic will still work with the wrong impedance but for “best quality” it is worth knowing. • Low impedance is better than high impedance. • Impedance is an electronics term which measures the amount of opposition a device has to an AC current (such as an audio signal). • Impedance is measured in ohms, shown with the Greek Omega symbol Ω or the letter Z. A microphone with the specification 600Ω has an impedance of 600 ohms. • You will often find that mics with a hard-wired cable and 1/4" jack are high impedance, and mics with separate balanced audio cable and XLR connector are low impedance.

  15. Which Impedance to Choose? RODE NTK SPECS Pickup Pattern: Cardioid Frequency Response: 20Hz - 20kHz Output Impedance: 200 ohms (100 ohms per leg) Sensitivity: -38dB re 1V/Pa (12mV @ 94dB SPL) +/-1dB Equivalent Noise: 12dB SPL • There are three general classifications for microphone impedance. Different manufacturers use slightly different guidelines but the classifications are roughly: • Low Impedance (less than 600Ω) • Medium Impedance (600Ω - 10,000Ω) • High Impedance (greater than 10,000Ω) • Note that some microphones have the ability to select from different impedance ratings. • High impedance microphones are usually quite cheap. Their main disadvantage is that they do not perform well over long distance cables - after about 5 or 10 mt they begin producing poor quality audio (in particular a loss of high frequencies). A LOW IMPEDANCE MIC

  16. Frequency Response • Frequency response refers to the way a microphone responds to different frequencies. It is a characteristic of all microphones that some frequencies are exaggerated and others are attenuated (reduced). For example, a frequency response which favours high frequencies means that the resulting audio output will sound more trebly than the original sound. • A microphone's frequency response pattern is shown using a chart like the one to the right referred to as a frequency response curve. The x axis shows frequency in Hertz, the y axis shows response in decibels. A higher value means that frequency will be exaggerated, a lower value means the frequency is attenuated. • In this example, frequencies around 5 - kHz are boosted while frequencies above 10kHz and below 100Hz are attenuated. This is a typical response curve for a vocal microphone.

  17. SHURE BETA 52A • So why wouldn’t all mics just have a “flat” frequency response? • In many cases a tailored frequency response is more useful. • For example, a vocal mic is a poor choice for picking up the low frequencies of a bass drum. • Condenser microphones generally have flatter frequency responses than dynamic. All other things being equal, this would usually mean that a condenser is more desirable if accurate sound is a prime consideration. This mic is designed for Kick Drums and Bass Instruments

  18. What mic should I use? • Think about the frequency response of the mic EG a dynamic mic used on a symphony orchestra will lack the high-freq response. Similarly a small condenser mic on tom-toms will make them sound thin. • It can be a subjective thing, but the following list contains typically used mics for various applications.

  19. Vocals - most people prefer large diaphragm condensers, unless you want a dirtier sound and use a dynamic for this. • El. Guitar amp – dynamic, or small condenser • Bass amp – either large diaphragm condenser or dynamic • Acoustic guitar/stringed instruments – large or small diaphragm condenser, or ribbon. Dynamic mic has too limited freq response. • Drum Kit – toms, snare and kick sound good with dynamics, because they don’t have any high freqs • Cymbals – on a drum kit use a pair of small diaphragm condensers. Dynamics lack the high freq response. TRY DIFFERENT COMBINATIONS OF MICROPHONES TO CAPTURE THE SOUNDS!

  20. FURTHER INFO Shure Microphones www.shure.com Rode Microphones www.rodemicrophones.com

  21. References http://en.wikipedia.org/wiki/Microphone www.shure.com www.rodemicrophones.com http://electronics.howstuffworks.com/question309.htm www.zzounds.com www.tkk.fi/Misc/Electronics/circuits/dynamic_to_electretinput.html Gador, R.,Understanding Microphones, PowerPoint, 2005 Compiled and Edited by Mark Pullin for Ausmusic 2006

More Related