1 / 41

CWNA Guide to Wireless LANs, Second Edition

CWNA Guide to Wireless LANs, Second Edition. Chapter Eleven Network Settings and Wireless LAN Troubleshooting. Objectives. Explain the wired network settings that can be modified in a wireless network List troubleshooting techniques for solving RF transmission problems

tarmon
Download Presentation

CWNA Guide to Wireless LANs, Second Edition

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CWNA Guide to Wireless LANs, Second Edition Chapter Eleven Network Settings and Wireless LAN Troubleshooting

  2. Objectives • Explain the wired network settings that can be modified in a wireless network • List troubleshooting techniques for solving RF transmission problems • Describe how to solve access point problems • Describe the types of wireless device problems and explain how to solve them CWNA Guide to Wireless LANs, Second Edition

  3. Wired Network Settings for Wireless Networks • All APs have RJ-45 connector that allows them to connect to an Ethernet hub or switch • Provide wired network resources to wireless devices • Settings for connecting to Ethernet network occasionally need to be adjusted • To improve wireless performance or provide additional capabilities • Mobile IP parameters can be set on APs CWNA Guide to Wireless LANs, Second Edition

  4. Ethernet Parameters: Basic Settings Figure 11-1: Basic Ethernet settings CWNA Guide to Wireless LANs, Second Edition

  5. Ethernet Parameters: Basic Settings (continued) • Allow wireless network administrators to designate Ethernet port as primary port of the AP • Select whether port “adopts” identity of primary port Table 11-1: Ethernet identification CWNA Guide to Wireless LANs, Second Edition

  6. Ethernet Parameters: Advanced Settings Figure 11-2: Advanced DNS settings CWNA Guide to Wireless LANs, Second Edition

  7. Ethernet Parameters: Advanced Settings (continued) • Setting on Figure 11-2: • Default Domain: Name of network’s IP domain • Current Domain: Domain that is serving the AP • IP addresses of up to three DNS servers can be entered under Domain Name Servers • Domain Suffix: Last portion of domain name of current network domain CWNA Guide to Wireless LANs, Second Edition

  8. Ethernet Parameters: Advanced Settings (continued) Figure 11-3: Advanced Ethernet settings CWNA Guide to Wireless LANs, Second Edition

  9. Ethernet Parameters: Filtering • Allows control of types of network traffic that pass from wired Ethernet network to WLAN devices • Configure AP to act as type of firewall • Different types of filtering: • Some devices filter at high level and can block an application from being requested • Other filtering can reject request for specific IP port • At the lowest level, filtering can look at received frames and block based on type of frame CWNA Guide to Wireless LANs, Second Edition

  10. Ethernet Parameters: Filtering (continued) • Frames can be filtered by protocol used • e.g., TCP, UDP, IPX • Frames can be filtered by frame format • Four-character hexadecimal number found in each frame that indicates protocol and frame format Table 11-2: Frame formats CWNA Guide to Wireless LANs, Second Edition

  11. Mobile IP Settings • Most WLAN implementations follow standard IP address plan • Single subnet for entire WLAN • Subnet: Portion of network that shares a common address component • Subnetting WLANs creates problems for users who roam between WLAN subnets • Cannot roam into new subnet without changing IP address • Need mechanism to ensure a device configured with specific IP address can continue to communicate when entering new subnet CWNA Guide to Wireless LANs, Second Edition

  12. Mobile IP Settings (continued) Figure 11-4: Roaming between wireless subnets CWNA Guide to Wireless LANs, Second Edition

  13. Mobile IP Settings (continued) • Mobile IP: Provides freedom to roam beyond home subnet while maintaining home IP address • AP forwards packets through Mobile IP enabled router to router on client’s home network • Five required devices: • Visiting device • Access point with Mobile IP enabled • Home agent • Authoritative access point • Foreign agent CWNA Guide to Wireless LANs, Second Edition

  14. Mobile IP Settings (continued) • Mobile IP begins with home agents and foreign agents advertising their services • APs with Mobile IP enabled listen to advertisements • When visiting client associates to AP, AP compares client’s IP address with own IP network • Detects that client is a visitor • Begins registration • Gets home agent’s IP address by looking it up on a subnet map table CWNA Guide to Wireless LANs, Second Edition

  15. Mobile IP Settings (continued) Table 11-3: Subnet map table CWNA Guide to Wireless LANs, Second Edition

  16. Mobile IP Settings (continued) • Authoritative access point (AAP) responsible for maintaining/distributing master subnet map table of APs and home agent information • On some WLANs, may have multiple AAPs • When client roams to another network, foreign agent provides routing services • Assigns mobile client new temporary IP number • Care-of address • Registers care-of address with home agent • Home agent redirects frames to client via care-of-address CWNA Guide to Wireless LANs, Second Edition

  17. Troubleshooting Wireless Networks • Troubleshooting can be difficult with WLANs • Many factors can impact wireless transmissions • Many of them are “non-technical” • Technology is relatively new • Problems can be result of anything from overlooking check box on a dialog box to metal objects in path of RF signal • Categorized into identifying and solving problems with RF transmissions, APs, and wireless devices CWNA Guide to Wireless LANs, Second Edition

  18. Solving RF Transmission Problems: Near/Far Figure 11-6: Near/far transmission problem CWNA Guide to Wireless LANs, Second Edition

  19. Solving RF Transmission Problems: Near/Far (continued) • Two steps to identify device that is a victim of near/far transmission problem • Wireless protocol analyzer running on a device displays signal strength • Low signal strength may indicate problem • May not indicate near/far problem • Also determine signal strength on nearby devices • Review placement of wireless devices CWNA Guide to Wireless LANs, Second Edition

  20. Solving RF Transmission Problems: Near/Far (continued) Figure 11-7: Signal strength CWNA Guide to Wireless LANs, Second Edition

  21. Solving RF Transmission Problems: Near/Far (continued) • Several solutions to near/far transmission problems: • Move device with stronger transmission power farther away from AP • Reduce transmission power of devices closer to AP • Increase transmission power of devices farther away from AP CWNA Guide to Wireless LANs, Second Edition

  22. Solving RF Transmission Problems: All-Band Interference • FHSS uses range of frequencies that change during transmission • Bluetooth, for example, is a close-range, frequency hopping technology that operates in same 2.4 GHz ISM band as IEEE 802.11b/gWLANs • Can create all-band interference • IEEE 802.11b/g and Bluetooth devices do not “peacefully coexist” in same environment CWNA Guide to Wireless LANs, Second Edition

  23. Solving RF Transmission Problems: All-Band Interference (continued) • Several options have been proposed for 802.11b/g and Bluetooth to work together: • Change the RF spectrum used • Modify power levels • Add switching software • Change the MAC layer • Change PHY layer • Best solutions is to not use the two devices together or migrate to 802.11a wireless technology CWNA Guide to Wireless LANs, Second Edition

  24. Solving RF Transmission Problems: System Throughput • Many factors influence WLAN transmission speed: • AP processor speed • Distance from AP • Implementing security solutions • Number of users associated with an AP • Packet size • RTS/CTS protocol • Types of RF interference • Using PCF protocol CWNA Guide to Wireless LANs, Second Edition

  25. Solving RF Transmission Problems: System Throughput (continued) • To troubleshoot: • Determine if all devices experiencing problem or only a single device • Identify potential causes that may have least impact on system if changed CWNA Guide to Wireless LANs, Second Edition

  26. Solving RF Transmission Problems: Co-Location Throughput • When a mobile wireless user enters into range of more than one AP, wireless device will choose an AP based on signal strength or packet error rates • For 802.11b and 802.11g wireless LANs only channels 1, 6, and 11 can be used to co-locate multiple APs in same area • Small amount of overlap between channels 1 and 6, as well as between channels 6 and 11 • Co-location throughput • Can affect wireless network performance CWNA Guide to Wireless LANs, Second Edition

  27. Solving RF Transmission Problems: Co-Location Throughput (continued) Figure 11-8: Adjacent Channels 1 and 6 CWNA Guide to Wireless LANs, Second Edition

  28. Solving RF Transmission Problems: Co-Location Throughput (continued) • Possible solutions: • Change channels to Channels 1 and 11 • Migrate to 802.11a • 8 non-overlapping channels CWNA Guide to Wireless LANs, Second Edition

  29. Solving RF Transmission Problems: Co-Location Throughput (continued) Figure 11-9: Separate channels CWNA Guide to Wireless LANs, Second Edition

  30. Solving Access Point Problems • All APs have external light emitting diodes • Ethernet indicator: Signals traffic on wired LAN • Green when Ethernet cable is connected • Blinks green when packet received or transmitted • Off when Ethernet cable not connected • Status indicator: Signals operational status • Green indicates AP associated with at least one wireless device, • Blinking green means AP operating normally but is not associated with any wireless devices • Radio indicator: Blinks green to indicate RF activity CWNA Guide to Wireless LANs, Second Edition

  31. Solving Access Point Problems (continued) Table 11-4: Cisco Aironet LED information CWNA Guide to Wireless LANs, Second Edition

  32. Solving Access Point Problems (continued) Table 11-4 (continued): Cisco Aironet LED information CWNA Guide to Wireless LANs, Second Edition

  33. Solving Access Point Problems (continued) • If AP does not communicate with devices, check: • SSID • WEP keys • Security settings • In extreme circumstances, may be necessary to delete current AP configuration and return all settings to factory defaults CWNA Guide to Wireless LANs, Second Edition

  34. Solving Wireless Device Problems: Wireless Device Connection Process • Five-step connection process: • Scan for access points • Wireless network adapter sends series of Probe Request frames • APs within range respond with Beacon frame that contains the capabilities of the wireless AP • Choose an access point • Decision based on: • Wireless AP capabilities • SSID matches a preferred network • Signal strength CWNA Guide to Wireless LANs, Second Edition

  35. Solving Wireless Device Problems: Wireless Device Connection Process (continued) • Five-step connection process (continued): • Authenticate with the access point • Type of authentication depends on security capabilities of AP and how wireless device has configured to authenticate with AP • Associate with the access point • Obtain an IP address • Manual addressing • DHCP addressing • APIPA addressing CWNA Guide to Wireless LANs, Second Edition

  36. Solving Wireless Device Problems: Troubleshooting Wireless Devices • Possible causes if problems makings connection: • Incompatible IEEE 802.11 standards • Mismatched authentication methods • Different WEP keys • Will not prevent association, but will prevent successful communication • Incorrect WEP key order • Mismatched pre-shared key • Conflict between Windows Wireless Auto Configuration and a third-party configuration tool • Incorrect MAC address CWNA Guide to Wireless LANs, Second Edition

  37. Solving Wireless Device Problems: Troubleshooting Wireless Devices (continued) • Possible causes if wireless device intermittently disconnects from AP: • Incompatible 802.1x authentication • For computers running Windows XP with SP1, clear Enable IEEE 802.1x authentication for this networkcheck box in Authentication tab • Duplicate SSID • Generally result of default SSID being used on APs • Infection by computer virus • Run antivirus software CWNA Guide to Wireless LANs, Second Edition

  38. Solving Wireless Device Problems: Troubleshooting Wireless Devices (continued) • Possible causes if wireless device intermittently disconnects from AP (continued): • Faulty hardware • Run diagnostic tests for AP or wireless network adapter • Use current drivers • Wireless attacks • May require special scanners to pinpoint attacker • Device misconfiguration CWNA Guide to Wireless LANs, Second Edition

  39. Summary • Maintaining a wireless LAN involves adjusting the wired Ethernet settings to ensure peak performance • Most WLAN network implementations follow the standard Internet protocol (IP) address plan, which calls for a single subnet to be used for the entire WLAN • Mobile IP provides users the freedom to roam beyond their home subnets while still maintaining their home IP addresses CWNA Guide to Wireless LANs, Second Edition

  40. Summary (continued) • A device that is transmitting at higher signal strength and is located closer to the access point will drown out a weaker signal from a device that is farther away and is using less power • Technologies such as Bluetooth which use the entire 2.4 GHz spectrum can impact IEEE 802.11 WLANs that use the same frequency spectrum • Co-location throughput can affect the performance of access points that use 802.11b/g technology because of channel overlap on channels 1, 6, 11 CWNA Guide to Wireless LANs, Second Edition

  41. Summary (continued) • Solving access point problems often starts with observing the LED lights that provide information regarding Ethernet and RF activity along with operational status • Wireless device problems fall into two broad categories: the inability to make a successful wireless connection and intermittently disconnecting from the access point CWNA Guide to Wireless LANs, Second Edition

More Related