1 / 10

MOBILE BUG

MOBILE BUG. By: M. Pavan kumar (cs12b1025) P.V.Sairam (me12b1027) B.Naveen reddy (me12b1007) Siva Krishna(cs12b1038 ). 0. CONTENTS. INTRODUCTION CIRCUIT DIAGRAM PIN CONFIGURATION OF 1) IC CA3130 PIN CONFIGURATION OF 2) IC2 NE555 WORKING APPLICATIONS LIMITATIONS

tamas
Download Presentation

MOBILE BUG

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MOBILE BUG By: M. Pavankumar(cs12b1025) P.V.Sairam(me12b1027) B.Naveenreddy(me12b1007) Siva Krishna(cs12b1038) 0

  2. CONTENTS • INTRODUCTION • CIRCUIT DIAGRAM • PIN CONFIGURATION OF 1) IC CA3130 • PIN CONFIGURATION OF 2) IC2 NE555 • WORKING • APPLICATIONS • LIMITATIONS • REFERENCES

  3. INTRODUCTION AIM:TO CONSTRUCT A CIRCUIT WHICH GIVES WARNING INDICATION IF MOBILE PHONE IS USED IN CONFIDENTIAL AREAS • WHAT IS AN ORDINARY LC CIRCUIT ? • WHY ORDINARY LC CIRCUIT DOESNOT SUIT FOR CELL PHONE DETECTOR CIRCUIT ? • WHAT IS THE BASIS FOR THIS CIRCUIT ?

  4. CIRCUIT DIAGRAM

  5. PIN CONFIGURATION OF (1) IC CA 3130

  6. PIN CONFIGURATION OF (2) ICNE 555 TIMER

  7. WORKING • 0.22µF Disk capacitor(C3) along with the leads acts as a small antenna to collect the RF signals from the mobile phone • This capacitor creates a field, stores energy and transfers the stored energy in the form of minute current to the inputs of IC CA3130 • Op-amp IC CA3130 converts the current to corresponding voltage output • Capacitor C4 and resistor R1 keeps the non-inverting input (3) stable • Resistor R2 provides the discharge path for capacitor C4

  8. Resistor R3 acts as a feed back resistor • C5 is connected for phase compensation • Depending on the signal frequency detected by the C3,output of the IC1 becomes high and low alternatively, indicated by LED1 and beeping of buzzer • Mono-stable timer IC2 is triggered through capacitor C7 • Capacitor C6 maintains the base bias of transistor T1 • R6 and C9 reduce time delay

  9. APPLICATIONS • It can be used to prevent the use of mobile phone in Examination halls, confidential rooms etc. • It is also useful for detecting the use of mobile phone for spying and unauthorized video transmission. • Range of the detector also plays a important role: EXAMPLE will be explained • It can detect the information receiving mobile phone even if it is in silent mode.

  10. LIMITATION RANGE OF CIRCUIT • The prototype has only limited range of two metres. • Exact location of mobile phone cannot be detected REFERENCES • www.google.com • www.googleimages.com • www.pdfmachine.com • www.Wikipedia.com

More Related