1 / 8

Labs 33A

Labs 33A. Circulation. Lab Pressures in the Systemic Circuit. Systolic pressure : peak arterial pressure during ventricular systole Diastolic pressure : minimum arterial pressure during diastole Pulse pressure : difference between systolic pressure and diastolic pressure

tadhg
Download Presentation

Labs 33A

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Labs 33A Circulation

  2. Lab Pressures in the Systemic Circuit • Systolic pressure: • peak arterial pressure during ventricular systole • Diastolic pressure: • minimum arterial pressure during diastole • Pulse pressure: • difference between systolic pressure and diastolic pressure • Mean arterial pressure(MAP): • MAP = diastolic pressure + 1/3 pulse pressure

  3. Measuring blood pressure • Enclose arm in cuff • Inflate to 160+ mmHg • Slowly allow pressure out while watching needle and listening to brachial artery with stethoscope • Watch and listen for the point where blood starts to flow through the cuff to the arm – this is the max pressure or systolic • Continue slowly letting pressure out until the point where you no longer hear the sound of turbulent blood flow (and needle stops bouncing) this is the point at which blood can flow freely meaning the pressure in cuff is just below minimum pressure or diastolic

  4. MAP • MAP is considered to be the perfusion pressure seen by organs in the body • MAP of 60 is necessary to perfuse the tissues • Formula is an estimate • Diastole counts for 2/3 of MAP because 2/3 of cardiac cycle is spent in diastole (and 1/3 in systole) • At high HR, this difference decreases and a better estimate is actually just the average of systole and diastolic

  5. Lab #37 • Follow instructions on lab handout and enter your data there • Part 1 – auscultation • Part 2 – blood pressure: • At rest • Lying down • After exercise • Part 3 – measure pulse at three different locations

  6. When done • We’ll put up the values on the board and look at the variation

  7. Assignment • Work in groups of 2 (3 max) • Lab guide filled out with data for yourself • Review Sheet Lab 33A- numbers 1 - 7, 10 - 16, 18 - 21, 24, 25, and 27 – 30 • Due next Thursday

More Related