Safety Gas Plus. Overview. 1. PRODUCT INTRODUCTION 2. FEATURES 3. BENEFITS 4. TECHNOLOGY 5. PERFORMANCE 6. INSTALLATION 7.NEW FEATURES . Product Introduction.
Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.
Safety Gas Plus will automatically shut-off the gas supply from the cylinder due to major leakages of gas caused due to:
2.B. Safety Gas Plus will not shut off if...
Any minor leakage occurs; Safety Gas Plus will indicate the leakage through our testing procedure of the minor leakage.
1) Type: New Regulator with Auto Shut off function for domestic LPG Cylinder
2) Material: Zinc body mainly.
3) Net Weight: 382 Gms
4) Outlet size: 12mm
5) Inlet Pressure: 0.7-15.6 Kpa
6) Outlet Pressure: 120-200 Kpa
7) Flow: 0.6-1.2 m3/hr
8) Connection: 19.8mm Or 21.8mm net connector
The Safety Gas Plus can also be used to check for minor leaks in your gas system (from the Safety Gas Plus to the stove) by carrying out the following steps:
Step 1Turn off all appliances stove, Safety Gas Plus and regulator. Turn on the tap of the Safety Gas Plusand the regulator. Depress the Safety Gas Plus gauge a few times.
Step 2 Turn off the tap on the Safety Gas Plus while leaving the tap of the regulator on.
Step 3Now observe the needle in the gauge for 5 to 10 minutes. If there is no change in the position of the needle, then your LP gas system is fine and can be used as normal.A drop in the needle position indicates a minor leak in the system. Proceed to Step 4 to find the leak.
Step 4Using a brush, apply a soapy solution (little detergent dissolved in water) liberally to all parts of the fittings and hose of the system.
Step 5A bubble or bubbles will arise at the spot of the leak.
4.A. The circumstances for a leak can be
Step 1 Turn off Gas at all points
Step 2 Depress fitting ring and remove regulator from the top of cylinder
Step 3Making sure that the tap is in closed position fit the Safety Gas Plus on to the cylinder in the same way as you would fit the regulator
Step 4Now fix the regulator to the brass nozzle of Safety Gas Plus
Step 5Make sure that the Safety Gas Plus and regulator are securely fastened. Open the taps on both
Step 6 Depress the gauge a few times
EXTRA SECURE VALVE
GAS SAFETY PLUS
ORDINARY SAFETY DEVICE
GAS SAFETY PLUS WITH SECURE VALVE
NO NEED TO FIX REGULATOR AND PIPE TO KNOW GAS AVAILABILITY
GAS SAFETY PLUS
IN ORDINARYGAS SAFETY DEVICENEED TO FIX REGULATOR,PIPE AND GAS STOVE TO KNOW GAS AVAILABILITY