1 / 1

Design, Analysis and Multi-Objective Constrained Optimization of Multi-Winglets

Design, Analysis and Multi-Objective Constrained Optimization of Multi-Winglets. Simultaneous Objectives Design Winglets to: Reduce drag Increase lift-to-drag ratio. Optimization Response surface methodology with genetic algorithm chosen as the optimization method

step
Download Presentation

Design, Analysis and Multi-Objective Constrained Optimization of Multi-Winglets

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Design, Analysis and Multi-Objective Constrained Optimization of Multi-Winglets • Simultaneous Objectives • Design Winglets to: • Reduce drag • Increase lift-to-drag ratio • Optimization • Response surface methodology with genetic algorithm chosen as the optimization method • Coefficients of lift, drag and moment and lift-to-drag ratio are four objective functions • ModeFRONTIER software chosen as the optimization environment CAD Design of Candidate Winglets • Background • High pressure from the lower side of a wing leaks around the wingtips to the upper side, creating tip vortices • Vortices => Induced Drag => More Fuel Consumption Timeline • Governing Navier-Stokes Equations Team Members Abraham NeissShanae Powell Sohail Reddy Advisor: Prof. George S. Dulikravich • Overall Design Method • 3D geometry modeling using E300 Code • 3D computational grid generation in OpenFOAM • Compressible turbulent flow analysis in OpenFOAM • Multi-objective optimization in modeFrontier • Design validation through wind tunnel testing

More Related