1 / 5

Network Communication Requirements (end-user to core)

Network Communication Requirements (end-user to core). HP Server Automation: Core Related. Opsware Command Center. 8080 tcp – Load balanced gateway to SA Core. End-User (Workstation). Server Automation Core. HTTP/HTTPS (80/443 TCP). Opsware Global File System.

stan
Download Presentation

Network Communication Requirements (end-user to core)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Network Communication Requirements (end-user to core) HP Server Automation: Core Related Opsware Command Center 8080 tcp – Load balanced gateway to SA Core End-User (Workstation) Server Automation Core HTTP/HTTPS (80/443 TCP) Opsware Global File System Global Shell - SSH (2222 TCP )

  2. Network Communication Requirements(Core to Core Communication) HP Server Automation: Core Related The Server Automation Cores replicate changes in real-time via Tibco Rendezvous. This enables the cores to remain synced with minimal network bandwidth. * Tibco communications are encapsulated over the management gateway tunnel ports (2001) Multi-master Mesh Component Server Automation Core Server Automation Core Management Gateway Tunnel (2001) *

  3. Network Communication Requirements(Satellite to Core Communication) HP Server Automation: Core Related The communication between satellite servers and cores is encrypted and tunneled over a single port. Server Automation Satellite Server Automation Core Core Gateway Tunnels 2001 (TCP) Bi-Directional

  4. Network Communication Requirements(server to core/satellite) HP Server Automation: Provisioning These are the various communications required to provision a new server. These are initiated through a small pre boot OS which is pushed to the server after PXE boot. * we will be placing Satellite Serves in front of ALL Cores for server to core communications. DHCP 67 UDP PXE PrebooteXecution Environment Managed Server / To be Provisioned Server Automation Core*/ Satellite TFTP 69 UDP NFS and SMB (adding netbios ports below)

  5. Network Communication Requirements(managed server to core/satellite) HP Server Automation: Managed Agent (Server) The ports listed here are utilized once the servers have been provisioned. All post-provisioning tasks such as management, patching, audit and remediation as well as package/application deployment utilize these ports. Both ports are configurable. * we will be placing Satellite Serves in front of ALL Cores for server to core communications. Managed Server (post provisioning) Server Automation Core* / Satellite Agent (Server) Initiated 3001 (TCP) Core/Satellite Initiated 1002(TCP)

More Related