1 / 12

Sea Water Chemistry

Sea Water Chemistry. Chapter 7. Major Ions in Typical Seawater. Ion Parts per thousand by weight ‰ (ppt)(Table 7.1) Cl- 18.98 SO 4 -2 2.649 HCO 3 - 0.140 Na+ 10.556 Mg 2+ 1.272 Ca+ 0.400 K+ 0.380.

sorena
Download Presentation

Sea Water Chemistry

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Sea Water Chemistry Chapter 7

  2. Major Ions in Typical Seawater • Ion Parts per thousand by weight ‰ (ppt)(Table 7.1) • Cl- 18.98 • SO4-2 2.649 • HCO3- 0.140 • Na+ 10.556 • Mg2+ 1.272 • Ca+ 0.400 • K+ 0.380

  3. On average, concentration of dissolved salts, i.e., the salinity, in seawater is 3.5% or 35‰. • The relative abundances of the ions listed above does not change, even though salinity does; are said to be conservative. • Relative abundances of minor and trace constituents do vary

  4. Determining Salinity • Evaporation of water to weight the salt is an imprecise method • Because of the constancy of composition if we measure one component we can get a more precise measurement • Salinity ppt = 1.80655 x Chlorinity in ppt • If chlorinity is 19.2 ppt, what is the salinity of sea water? • 34.7 ppt = 35 ppt

  5. Density - mass per unit volume (grams/cm3) • density of water phases (ice, liquid, vapor) due to structural changes at molecular level • density maximum at 4°C in pure water • Major role in deep ocean circulation and water column structure and stability

  6. Water Density • Influenced by three factors • Salinity - proportional • Pressure - proportional • Temperature – inversely proportional

  7. Ocean Structure • Upper 100-500 m to have uniform temperature and salinity because of mixing by waves.(6.13) • Below this, to a depth of ~1000 m, Temp., Salinity, and density change ( Thermocline, Halocline, Pycnocline) (6.12)

  8. In deep water, temperature, salinity and density are relatively uniform • This structure varies latitudinally. At mid-latitudes, it also varies seasonally: upper mixed layer will deepen in summer; • thermocline might largely disappear in winter

More Related