1 / 28

Creating OPT-files Detecting and solving problems

Tobias Nilsson. Creating OPT-files Detecting and solving problems. Sometimes there are problems with a session. Clock breaks Noisy stations Bad sources. How do you know if there is a problem with a session?.

sonya-foley
Download Presentation

Creating OPT-files Detecting and solving problems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Tobias Nilsson Creating OPT-filesDetecting and solving problems

  2. VieVS User Workshop 2010 Sometimes there are problems with a session... Clock breaks Noisy stations Bad sources ...

  3. VieVS User Workshop 2010 How do you know if there is a problem with a session? Large residuals after processing, e.g. chi-squared of main solution is large (larger than 1.5-2.5) Strange results Stations or correlator report a problem

  4. Residuals of a good session • Session 10JAN25XA (R1415) • Chi-squared of main solution: 0.86 • Looks good, no OPT-file is needed for this session (except for special investigations) VieVS User Workshop 2010

  5. VieVS User Workshop 2010 Residuals of a bad session Session 09NOV30XA (R1407) Chi-squared of main solution: 2.32 Probably a clock breaks

  6. VieVS User Workshop 2010 The OPT-file Contains specific information for making the problematic sessions work: Reference clock Clock breaks Stations to be excluded Sources to be excluded Baselines to be excluded Directory: DATA/OPT/SUBDIR/YYYY/

  7. VieVS User Workshop 2010 Example of an OPT-file GOODSTAT is chosen as reference clock 3 clock breaks (2 in JUMPY, 1 in BADCLOCK) 2 station excluded 1 source excluded 1 baseline excluded Cable cal. of station BADCABLE not used. CLOCK REFERENCE: GOODSTAT CLOCK BREAKS: 3 JUMPY 55403.09 JUMPY 55403.67 BADCLOCK 55403.25 STATIONS TO BE EXCLUDED: 2 BADSTAT1 BADSTAT2 SOURCES TO BE EXCLUDED: 1 0000+666 BASELINES TO BE EXCLUDED: 1 BAD_BAS1 BAD_BAS2 NO CABLE CAL: 1 BADCABLE # This is a comment

  8. VieVS User Workshop 2010 Reference clock The clock reference option specifies the default reference clock for the experiment. A station with a good clock should be used (i.e. it should not have any clock breaks!). If not specified, first station in the antenna structure array will be used as reference. CLOCK REFERENCE: GOODSTAT

  9. VieVS User Workshop 2010 Clock breaks Sometimes there is a jump in a stations clock. The number after “CLOCK BREAKS:” specifies the number of clock breaks in the session. The following lines specifies the clock breaks: station name (8 characters) followed by the modified Julian date of the break. How to detect clock breaks: Find it manually using VieVS From correlator report or from e.g. the Goddard analysis. Divine inspiration. CLOCK BREAKS: 3 JUMPY 55403.09 JUMPY 55403.67 BADCLOCK 55403.25

  10. VieVS User Workshop 2010 Finding clock breaks Unselected the “apply main solution” in the first Vie_lsm GUI. Now only the first solution will be performed (only estimating quadratic clock functions and one ZWD per station). Afterwards, station-wise residual plots will be shown (except for the station with the reference clock).

  11. VieVS User Workshop 2010 Finding clock breaks (II) Station-wise residuals plots after first solution:

  12. Finding Clock breaks (III) • Residuals for WETTZELL, session 09NOV24XA_N004 • Large residuals for observations with station 4 (BADARY). Sudden change between negative and positive residuals. Indicates a clock break at BADARY. • If BADARY would be the reference clock, you would have to change the reference clock to another station and re-run the solution to get the residual plot for BADARY. VieVS User Workshop 2010

  13. Finding Clock breaks (IV) • Residuals for BADARY, session 09NOV24XA_N004 • Clear clock break in the middle of the session. • To find the exact time of the break, zoom in. VieVS User Workshop 2010

  14. Finding Clock breaks (V) • Zoomed in around the time of the clock break. • Clock break seems to be between Modified Julian dates 55166.260 and 55166.265. • Any time between the last observation before the break and the first after the break will do (e.g. 55166.263). • The clock break then needs to be entered into the OPT-file. VieVS User Workshop 2010

  15. VieVS User Workshop 2010 Finding Clock breaks (VI) Create/edit the OPT-file and enter the clock break. When you now re-run the solution (using the OPT-file), the clock breaks should be corrected for in the first solution. 09NOV30XA.OPT CLOCK BREAKS: 1 BADARY 55166.263

  16. VieVS User Workshop 2010 Finding Clock breaks (VII) After entering the clock break into the OPT-file, the solution gets better. Before correcting for clock break Chi-squared: 2.32 After correcting for clock break Chi-squared: 0.69

  17. VieVS User Workshop 2010 Excluding stations Reasons for excluding a station: Problematic station (e.g. very noisy observations for the station). Few observations for the station. Special investigations (test the impact of excluding the station). STATIONS TO BE EXCLUDED: 2 BADSTAT1 BADSTAT2

  18. VieVS User Workshop 2010 Detecting bad stations Example of a noisy station: BADARY, session 09JUN04XE (R4381) Residuals after first solution Large residuals, no obvious reason (e.g. clock breaks) Removing BADARY from this session decreases chi-squared from 1.7 to 0.8

  19. VieVS User Workshop 2010 Excluding sources Reasons for excluding a source: Bad source Bad coordinates for the source (and source coordinates fixed) Very few observations of a source (when you estimate all source coordinates). Special investigations (test the impact) SOURCES TO BE EXCLUDED: 1 0000+666

  20. Detecting bad sources • Normally quite difficult to detect bad sources • Example: 09DEC02XA (RDV78) • Some large residuals (chi-squared of main sol.: 21.9) • Hint that there could be problems with the sources: many non-CRF sources observed (e.g. these may have bad coordinates) VieVS User Workshop 2010

  21. Detecting bad sources (II) • Zoom in a bit around some large residuals • Large residuals seems to be grouped. Could mean that certain scans are bad. • Checking which scans that gives large residuals, it turns out that most are for scans observing sources 2019-408 and 0130-447 VieVS User Workshop 2010

  22. Detecting bad sources (II) • Residuals of main solution after removal of sources 1936+095 and 0130-447 • Large residuals disappeared (chi-squared now 0.79) VieVS User Workshop 2010

  23. VieVS User Workshop 2010 Excluding baselines Excludes all observations from a specific baseline Reasons to exclude a baseline: Some error with the observations for that baseline Special investigations BASELINES TO BE EXCLUDED: 1 BAD_BAS1 BAD_BAS2

  24. VieVS User Workshop 2010 Detecting bad baselines Example: 04DEC14XA (EURO74) Residuals after first solution: Effelsberg Ny Ålesund (other stations similar) Wettzell Effelsberg large residuals with Wettzell Wettzell large residuals with Effelsberg All other stations: large residuals to Effelsberg and Wettzell Indicate problem with observations between Effelsberg and Wettzell

  25. VieVS User Workshop 2010 Remove cable measurements Sometimes the cable measurements of a station is of bad quality. It is better not to use them at all (i.e. assume cable corrections zero) The “NO CABLE CAL” option specifies that the calbel calibration measurements of a station should not be used. How to know if a cable is bad: Correlation report, Goddard analysis report, station logs etc. Visual inspection of plots of the cable cal. measurements NO CABLE CAL: 1 BADCABLE

  26. Example of a bad cable • FORTLEZA, session 09JAN13XA (RD0901) • From:http://lupus.gsfc.nasa.gov/sess/sesshtml/2009/rd0901.html VieVS User Workshop 2010

  27. VieVS User Workshop 2010 Other problems that can occur A few observations are bad Solution: add observations manually to Outlier file (if not done by outlier test) A clock has a large diurnal variability Solution, use very loose constraints for the piece-wise linear offsets of that clock. The normal equation matrix in the Least squares adjustment is (close to) singular Solution: reduce the number of parameters to be estimated

  28. VieVS User Workshop 2010 Hopefully, you are now able to process VLBI sessions with VieVS without any problems!

More Related