Malls / Super stores Solution. Strict construction deadlines, tight budgets and unexpected changes require a technical infrastructure that is reliable, simple and quick to install. Reconfigurations and maintenance operations must be made easy to ensure a good level of service continuity.
unexpected changes require a technical infrastructure
that is reliable, simple and quick to install.
Reconfigurations and maintenance operations must be
made easy to ensure a good level of service continuity.
And besides providing energy savings, integrated
lighting solutions can help to boost sales.
DO NOT TOUCH
ANY OF THESE
Vertical Cable Support
Changes in elevation:
Horizontal Cable Managers
maximum versatility, for minimum service interruption in the event of
reconfiguration of sales areas.
wire mesh cable tray: safe, quick
and easy fit
Different Steel Cable Tray
systems to suit all kinds
Prtection, Isolation, Controlling, Signaling & Metering Productr
Acti 9 Communication system
the main board to the final
application. Intelligent solutions
allow to protect your installation
and to measure and control your
Increase energy efficiency through solutions that either optimize energy
quality or enable reduced energy consumption. Reactive energy
compensation systems contribute to increasing the all-round output of
your electrical installation. Lighting management solutions ensure just
the right amount of light when and where you need it, thereby
generating significant energy savings.
Power dimmers for easy
definition and adjustment
o f l i g h t i n g l e v e l
Protect electrical installations and sensitive equipment against the indirect effects of lightning
Lightning can cause considerable damage and must be taken into consideration. Although lightning rods protect buildings against direct surges, their presence makes the installation of surge protectors obligatory to protect sensitive equipment against overvoltages caused by discharge currents. The surge protectors protects your installation from the general low voltage transformer to the socket outlet.
· Suitable for concrete and raised floor applications
· Large capacity: from 10 to 24 Mosaic modules GPO or data
· Strong and reversible lid
· Stainless steel lid and carpet compatible versions available
Under floor connection boxes are
components of the screed-covered
installation duct system. They are
inserted at intersections of screed covered
duct sections or installation
pipes and in duct runs and, depending
on the expansion, allow
access to the cables routed in the
duct or in the pipes or the installation
of electrical resources
fire protection systems for electrical installations for many years. In accordance with the requirements of
statutory regulations and legal provisions, all systems have been tested and approved to applicable fire protection standards. As
safety is becoming an ever more prevalent issue, legislators are continuing the now familiar trend of setting out more and more
specifications for fire protection. The validity of these specifications extends to electrical installations, and proof of such compliance
must be provided. Options for fire-resistant cable installation above suspended fire protection ceilings do of course also fall
within the scope of such specifications.
OBO fire protection ducts are known for installation in emergency and escape routes for some time now. The ducts are made of fiber-glass reinforced lightweight concrete and allow flexible installation with high protection classes. The designs are proved for installation ducts (I-class), but also for electrical function maintenance (E-duct).
In this area you can find a lot of installation variations, as standard-specific or cable-specific support system for the supply of safety-relevant systems. Herewith you can realize installations with diverse requirements for function maintenance classes E30 to E90 and according to DIN 4102 part 12.
Operation during severe disturbances:
Switch Fuse Units
Universal Panel Enclosures
The steel and stainless-steel enclosure ranges
From small industrial boxes to large floor-standing enclosures, the Spacial range of metal enclosures can adapt to any indoor application.
Two materials available to ensure best performance in any installation environment :
To be truly seamless, some interior design concepts need switches to be as invisible as possible. Until now full-flat switches that could satisfy this need have been limited to luxurious electronic switches and lighting control systems.
The accessories includes extensive ranges of fused plugs, extension sockets, safety covers, door chimes and night lights. Our quality accessories provide professional applications to users with already proven reliability.
The ideal solution, always and everywhereIts versatility makes Arteor the ideal choice for every kind of project, anywhere in the world at any installation level. Arteor suits any requirement in terms of design and function for every kind of building, from residential to commercial.