1 / 7

Machine Computer

Machine Computer. PC Structure. On 4U frame Possibility of sliding out the (on rails), enabling easy access to the internal boards without disconnecting any cables from the computer’s rear side Powered by two Intel Xeon 2.2 GHz processors 3 GB RAM 40 GB SCSI hard drive. Boards.

sondra
Download Presentation

Machine Computer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Machine Computer

  2. PC Structure • On 4U frame • Possibility of sliding out the (on rails), enabling easy access to the internal boards without disconnecting any cables from the computer’s rear side • Powered by two Intel Xeon 2.2 GHz processors • 3 GB RAM • 40 GB SCSI hard drive Confidential

  3. Boards • ILP2000 – Printing Data Processing Board:Reads the image data, which is loaded into the memory, using the DMA (Direct Memory Access) method, without using CPU time for accelerating the process.(not applicable for machines 100 and up) • TTLC – RS422 Transmitter Board:Receives data signals from the ILP2000 board and transmits them to the MTFX-QLM box.(not applicable for machines 100 and up) • I/O – Input/Output board: Connects the QLM box to other sub-systems.(not applicable for machines 100 and up) Confidential

  4. Outputs • COM 1 – Responsible for serial communication with the CCB, STC and bridge heating. Connected to the J10 port in theControl unit. • COM 2 – Responsible for serial communication with the I/O board. Connected to the J11 port in the Control unit. Confidential

  5. Outputs (Cont.) • First USB – Dongle • Second USB (COM 4) – Responsible for serial communication with the DHC (Drum Heat Controller board). Connected to the control unit J12 port Via USB to Serial-232 adaptor. • Third USB (COM 3) – Responsible for serial communication with inkjet driver boards. Connected to the control unit J14 port Via USB to Serial-232 adaptor. Confidential

  6. Inner View TTLC ILP IO TTLC I\O ILP2000 Confidential

  7. Power COM 2 Inlet W26 To Control Unit J11 To QLM USB Dongle G-bit 10/100 W26 Mouse COM 4 To Control Unit J12 To To Network Galil W26 COM 3 To Control Unit J14 Keyboard COM 1 Screen I/O ILP TTLC SCSI 100P Cable To QLM Unit JR1 W26 W9 SCSI Cable To Control Unit J10 To QLM Unit JM1 Connections Confidential

More Related