The Purpose Of An Automatic Gate System

1. The Purpose Of An Automatic Gate System Automatic gates can control access into secured places. Commonly these gates are placed at the entrance of facilities and can control access of vehicles on as well as of the site. An automatic gate system is also used in the interiors of different facilities. These gates are used inside a parking area of offices and shopping malls to control the incoming and outgoing traffics. You could see the same systems in toll plazas on high ways. Having remote-controlled automated or self-controlled gates make traffic management easy for securities. Considerations for Automatic Gates The opening size of an automatic gate is an important deciding factor. If the gate opening size is wider, it will be more expensive.  The availability of space surrounding the gate might limit the gate to be used. When the area is large with a lot of space, any kind of automatic gate is used. If located in urban places, the options are limited to one or two.  The weight of an automatic gate decides the grade and type of gate operator needed. If the gate is taller and wider, it shall weigh more. Gates weigh differently according to the material used in construction.  Different automatic gates need different speeds for opening and closing. The slow speeds are acceptable in residential they are unacceptable in industrial 

2. areas. Opening speeds if too slow might cause traffic. Closing speed when too slow can cause security violations. The number of times an automatic gate system shall be opened and closed daily should be considered while choosing an automatic gate. The gates designed for residential places may be intended to be opened for lesser number of times compared to gates used in industrial places.  Most gates are designed to function on flat levels. Gates that open on inclines might cause wear and tear resulting in premature failure.  There should be special care while installing automatic gates in places that are extremely cold or hot.  Gate construction is vital. When you add a gate operator designed originally for physical operation might be a real mistake. Automatic gates should be designed mainly for automatic operation.  The kind of neighborhood an automatic gate should be installed should be considered. The gates installed at the residential places need stringent safety measures compared to gates being installed in industrial places.  Determining the kind of automatic gate system is a huge decision. Automatic gates need regular maintenance. If you do not have the proper knowledge regarding the kind of gate to be installed, you should use the services of an independent consultant or a professional engineer. Companies like Somfy having decades of experience in the R&D of automated equipment and appliances can help you in this matter. They can even customize the systems as per their clients’ requirements.