1 / 31

Imposition in JDF

Imposition in JDF. Francis Labaere Esko-Graphics. Contents. Imposition in Job Planning Stripping process (resource: StrippingParams) Imposition in Prepress Imposition process (resource: Layout) Imposition in Digital Printing LayoutPreparation process (resource: LayoutPreparationsParams)

sol
Download Presentation

Imposition in JDF

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Imposition in JDF Francis Labaere Esko-Graphics

  2. Contents • Imposition in Job Planning • Stripping process (resource: StrippingParams) • Imposition in Prepress • Imposition process (resource: Layout) • Imposition in Digital Printing • LayoutPreparation process (resource: LayoutPreparationsParams) • Imposition and MIS to Prepress ICS

  3. Imposition in Job Planning

  4. Available machines Available materials Available people Capabilities Optimal plan Optimized production plan Customer Order

  5. Optimal Plan • Includes parameters related to • Printing (press, paper, work style) • Folding (folding scheme) • Binding and trimming (assembly method) • Largely determines the imposition, BUT • No exact positions (no creep, no bottling, …) • No press marks, slug lines

  6. Stripping StrippingParams Layout RunList(Marks) Assembly RunList(Doc) JDF Stripping High level (Optimal Plan) flattened

  7. StrippingParams • BinderySignature • FoldCatalog, SignatureCells, (FoldProcedure) • StripCellParams • TrimSize, BleedFace, BleedSpine, BleedFoot, BleedHead, … • WorkStyle • WorkAndBack, WorkAndTurn, Perfecting, WorkAndTumble • RelativeBox and Position • SectionList • References to Device (printing press) and Media (paper and plates) resources

  8. StrippingParams/BinderySignature Sheet1,2,3: using FoldCatalog F16-6 sheetwise <StrippingParams ID="FoldCatalogSample" Class="Parameter" Status="Available" WorkStyle="WorkAndBack" PartIDKeys="SignatureName SheetName"> <BinderySignature FoldCatalog="F16-6"/> <StrippingParams SignatureName="Sig1"> <StrippingParams SheetName="Sheet1"/> <StrippingParams SheetName="Sheet2"/> <StrippingParams SheetName="Sheet3"/> </StrippingParams> <DeviceRef rRef="Reference to printing press in ResourcePool"/> <MediaRef rRef="Reference to paper in ResourcePool"/> </StrippingParams> 82 folding schemes in FoldCatalog. See Fig 7.9 & 7.10 on pages 368-369 of jdf spec 1.2 (p. 404-405 in PDF)

  9. StrippingParams/StripCellParams Sheet1,2: using FoldCatalog F16-6 sheetwiseSheet3: using FoldCatalog F8-7 work and turn <StrippingParams ID="FoldCatalogSample" Class="Parameter" Status="Available" WorkStyle="WorkAndBack" PartIDKeys="SheetName"> <BinderySignature FoldCatalog="F16-6"/> <StripCellParams BleedFace="5.669" BleedSpine="5.669" BleedFoot="5.669" BleedHead="5.669" TrimFace="14.17" Spine="0.0" TrimHead="14.17" TrimFoot="14.17" FrontOverfold="28.346" MillingDepth="0.0" CutWidthHead="0.0" CutWidthFoot="0.0" TrimSize="595.276 841.890"/> <StrippingParams SheetName="Sheet1"/> <StrippingParams SheetName="Sheet2"/> <StrippingParams SheetName="Sheet3" WorkStyle="WorkAndTurn"> <BinderySignature FoldCatalog="F8-7"/> <Position RelativeBox="0 0 0.5 1" Orientation="Flip90"/> <Position RelativeBox="0.5 0 1 1" Orientation="Flip270"/> </StrippingParams> </StrippingParams>

  10. StrippingParams/StripCellParams

  11. StrippingParams/Position Sheet1,2: using FoldCatalog F16-6 sheetwiseSheet3: using FoldCatalog F8-7 work and turn <StrippingParams ID="FoldCatalogSample" Class="Parameter" Status="Available" WorkStyle="WorkAndBack" PartIDKeys="SheetName"> <BinderySignature FoldCatalog="F16-6"/> <StripCellParams BleedFace="5.669" BleedSpine="5.669" BleedFoot="5.669" BleedHead="5.669" TrimFace="14.17" Spine="0.0" TrimHead="14.17" TrimFoot="14.17" FrontOverfold="28.346" MillingDepth="0.0" CutWidthHead="0.0" CutWidthFoot="0.0" TrimSize="595.276 841.890"/> <StrippingParams SheetName="Sheet1"/> <StrippingParams SheetName="Sheet2"/> <StrippingParams SheetName="Sheet3" WorkStyle="WorkAndTurn"> <BinderySignature FoldCatalog="F8-7"/> <Position RelativeBox="0 0 0.5 1" Orientation="Flip90"/> <Position RelativeBox="0.5 0 1 1" Orientation="Flip270"/> </StrippingParams> </StrippingParams>

  12. 0 0.5 0.5 1 0.5 0.5 1 1 0 0 0.5 0.5 0.5 0 1 0.5 StrippingParams/Position/@RelativeBox Position/@RelativeBox: defines the relative position of the signature (0->1) 1 0 0 1 Position/@Orientation: defines the rotation and side of the signature. See jdf spec 1.2 p.24 (p.60 in PDF)

  13. StrippingParams/BinderySignature Sheet using SignatureCells <BinderySignature ID="B2x4" Class="Parameter" Status="Available" NumberUp="4 2"> <SignatureCell FrontPages="15 0 3 12"BackPages="14 1 2 13" Orientation="Up"/> <SignatureCell FrontPages="8 7 4 11" BackPages="9 6 5 10" Orientation="Down"/> </BinderySignature>

  14. Sheet1 F8-7Section 0 F8-7Section 3 Sheet 2 Sheet 3 Sheet 4 F16-6Section 1 F16-6Section 2 F16-6Section 4 StrippingParams/@SectionList 64 pages

  15. StrippingParams/@SectionList <BinderySignature ID="F16-6" FoldCatalog="F16-6" Class="Parameter" Status="Available"/> <BinderySignature ID="F8-7" FoldCatalog="F8-7" Class="Parameter" Status="Available"/> <StrippingParams ID="L1" Class="Parameter" Status="Available" WorkStyle="WorkAndBack" PartIDKeys="SheetName BinderySignatureName" PartUsage="Implicit" rRefs="F16-6 F8-7"> <StrippingParams SheetName="Sheet1"> <BinderySignatureRef rRef="F8-7"/> <StrippingParams BinderySignatureName="F8-7a" SectionList="0"> <Position RelativeBox="0 0 0.5 1"/> </StrippingParams> <StrippingParams BinderySignatureName="F8-7b" SectionList="3"> <Position RelativeBox="0.5 0 1 1"/> </StrippingParams> </StrippingParams> <StrippingParams SheetName="Sheet2"> <BinderySignatureRef rRef="F16-6" SectionList="1"/> </StrippingParams> <StrippingParams SheetName="Sheet3"> <BinderySignatureRef rRef="F16-6" SectionList="2"/> </StrippingParams> <StrippingParams SheetName="Sheet4"> <BinderySignatureRef rRef="F16-6" SectionList="4"/> </StrippingParams> </StrippingParams>

  16. Assembly • Perfect bound  “Gathering” (on a pile) • Saddlestitch  “Collecting” (on a saddle) • Mixed assembly is possible as well <Assembly ID="ASM200" Status="Available" Order="Collecting"/>

  17. Imposition in Prepress

  18. Imposition Imposed Surfaces Layout RunList RunList(Doc) RunList(Marks) JDF Imposition Exact page and mark positions on the sheets

  19. 0 3 Layout 2834.6 1843.9 996.3 Front 2029.6 1428.6 0 0 2834.6

  20. 2 1 Layout 2834.6 1843.9 996.3 Back 2029.6 1428.6 0 0 2834.6

  21. Layout <Layout Class="Parameter" ID="ID2" Status="Available"> <Signature Name="signature1"> <Sheet Name="sheet1"> <Surface Side="Front" SurfaceContentsBox="0 0 2834.64566 2834.64566"> <MarkObject CTM="1 0 0 1 0 0" Ord="0"/> <ContentObject CTM="1 0 0 1 1428.66137695 996.377929688" ClipBox="1422.99206543 990.708679199 2029.60632324 1843.93701172" Ord="0"/> <ContentObject CTM="1 0 0 1 810.708679199 996.377929688" ClipBox="805.039367676 990.708679199 1411.65356445 1843.93701172" Ord="3"/> </Surface> <Surface Side="Back" SurfaceContentsBox="0 0 2834.6456 2834.645669"> <MarkObject CTM="1 0 0 1 0 0" Ord="1"/> <ContentObject CTM="1 0 0 1 810.708679199 996.377929688" ClipBox="805.039367676 990.708679199 1411.65356445 1843.93701172" Ord="1"/> <ContentObject CTM="1 0 0 1 1428.66137695 996.377929688" ClipBox="1422.99206543 990.708679199 2029.60632324 1843.93701172" Ord="2"/> </Surface> </Sheet> </Signature> </Layout>

  22. Layout • Imposition parameters like work style, assembly, and binding are implicit • Positions are absolute • Marks are included • Flattened description: no difference between one 16-page signature and two 8-pages signatures on a sheet

  23. Imposition in Digital Printing

  24. Imposition in digital printing • Generates an imposition Layout from high level parameters • Useful for digital printers with integrated prepress • Supports controls for specifying • Multi-up regular grid of page cells • Scaling and rotation of reader pages for page cell mapping • Single sided or perfected (head to head/foot) sheets • Auto generation of sheet marks and slug lines • Page distribution schemes for saddle, and perfect binding • Sequential cut block distribution (i.e. cut and stack post cards) • Control for vert, horiz, and stack wise distribution of cut blocks • Independent horiz/vert gutter spacing and creep compensation • Document and cut block step and repeat • VDP document ganging

  25. LayoutPreparationParams • NumberUp • Rows and columns of PageCells • PageDistributionScheme • Distribution of PageCells over NumberUp (Saddle, Perfect, Sequential) • PresentationDirection • Distribution of pages into NumberUp (FoldCatalog, XYZxyz) • Sides • OneSidedFront, OneSidedBackFlipX/Y, TwoSidedFlipX/Y • FinishingOrder • GatherFold, FoldGather, FoldCollect, Gather • StepRepeat

  26. LayoutPreparationsParams • ImageShift • InsertSheet • FitPolicy • PageCell • Border, Color

  27. Impositioning & MIS to Prepress ICS

  28. MIS to Prepress ICS From MIS Controller to Prepress Workflow Manager

  29. MIS to Prepress ICS • Level 1 ImpositionPreparation Gray Box • BinderySignature: only FoldCatalog • StrippingParams: no SectionList • Assembly: no mixed assemblies • StripCellParams: only TrimSize is mandatory

  30. Summary

  31. Summary • Three imposition methods covering different needs • Stripping (MIS -> Prepress) • Layout (Imposition program -> RIP) • LayoutPreparation (Prepress -> Digital press) • Open issues for “imposition” (aka step & repeat) for packaging

More Related