1 / 5

Connecting a Bulb to an On-Off Switch: A Step-by-Step Guide

This presentation outlines the process of making a connection between a single bulb and an on-off switch. Aimed at educational purposes, it provides material and tools required for the project, such as a 6 Amp switch, a bulb, a 2-pin plug, flexible electric wire, and essential tools like pliers and a screwdriver. Detailed instructions are given for connecting the components, including connection diagrams. Perfect for beginners looking to understand basic electrical circuit assembly.

skah
Download Presentation

Connecting a Bulb to an On-Off Switch: A Step-by-Step Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PRESENTATION ON Making Connection of One bulb with one on-off switch, Arun kumar , WET K.V. NHPC CHAMERA-2

  2. TOPIC-MAKING CONNECTION OF ONE SWITCH AND ONE BULB AIM:-Making Connection of one Switch and one Bulb circuit board. Material Required:-1.One 6 Amp Switch 2.One BULB 3.One 2-Pin Plug 4.Flexible Electric wire 5.Switch Board Tools Required:- Pliers and Screw Driver

  3. Diagrams of Material /Tools Required Plier and Screw Driver Electric Wire Socket On-Off-Switch

  4. Method of making connection of one bulb holder and one switch • Take two electric wire. • Connect one electric wire to the any one point of the on – off – switch. (phase/Live wire) • Connect other electric wire to the any one point of the bulb holder. ( Neutral wire) • Connect the rest point of the switch and bulb holder together by a small piece of electric wire. • Take a two pin plug top and connect it with outside Pahse and Neutral wire Live Wire Neutral wire Bulb Holder On-OFF Switch

  5. THANKS

More Related