1 / 18

Backscattering TMS

Backscattering TMS. Junko Katayama. What I did. I computed the backscattering noise on the each surface of BRT and GPT lenses. Simple estimation Including radiation pressure u p-conversion up-conversion using the relative motion between ETM and TMS elements. TMS. ETM. BRT. B1. B2.

sivan
Download Presentation

Backscattering TMS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Backscattering TMS Junko Katayama

  2. What I did I computed the backscattering noise on the each surface of BRT and GPT lenses. • Simple estimation • Including radiation pressure • up-conversion • up-conversion using the relative motion between ETM and TMS elements

  3. TMS ETM BRT B1 B2 GPT G1 G2 G3 G4 B4 B3 QPD

  4. Simple estimation Φ(t) << 1 h = sqrt(f_sc) * T/L * δx f_sc = |overlap integral|2 * RAR

  5. Simple estimationon each surface of lenses

  6. Including radiation pressure • h = G*sqrt(f_sc*T*Pcav/Pin)/L*4pi/λ*δx (G is given by Aso-san) • Transfer Function (Simple pendulum) TF = 1/(1-ω2/ω02+iω/ω0*1/Q)

  7. Including radiation pressurewith TF

  8. up-conversion Esc*eiΩt[cos(φ(t))+isin(φ(t))] φ(t) << 1 h = G*sqrt(f_sc*T*Pcav/Pin)/L*4pi/λ*δx φ(t) >> 1 Up-conversion ; φ(t) → sin(φ(t)) Pφ(ω)→ Psinφ(ω) ≡Pa(ω) Pφ(ω)

  9. autocorrelation function already know want to know From Aso-san slides ‘ScatteringWorkshop’

  10. Pφ(ω) & Pa(ω)

  11. Pφ(ω) & Pa(ω)adding peek

  12. up-conversion with TF

  13. using relative motionbetween ETM and TMS at low frequency : ETM moves larger, as much as the seismic motion. → so we should consider the relative motion between ETM and TMS elements. ETM element xrelative= (xETM2 + xTMS2)1/2 xTMS xETM

  14. up-conversion with TFcomparing normal & using relative motion

  15. up-conversion with TFcomparing normal & using relative motion From last slide, we can see that there is almost no problem with relative motion between ETM and TMS. → We can see this reason in the next two slides. ETM motion and its contribution to h are enough smaller than TMS motion at > 1 Hz.

  16. comparing ETM & TMS motion

  17. ETM contribution to h

  18. Conclusion • TMS should be suspended Simple pendulum is enough for TMS • ETM motion is quite smaller than TMS motion → No problem with relative motion

More Related