1 / 1

plastik enjeksiyon ve kalıp imalatı

On this case the mould merely consists of two halves commonly known as the moving (core) half and glued (cavity) half. Starting from the injection facet, a location ring is fitted to the back of the rear backing plate, this locates and centralises the mould into the fastened platen. By way of the finding ring a sprue bush might be seen. The sprue bush is profiled with a radius to match up with the injection unit nozzle so that material may be straight transferred from the injection unit through to the mould cavity. Within the case of a single impression (cavity) mould, the sprue could feed immediately onto the part, within the case of a multi impression mould, the sprue feeds onto a runner system machined into the instrument face that acts as a transfer system to the cavity for the molten materials. Heated or hot runner systems could also be included in the mounted half of the mould such that the sprue and runner feed system is constantly molten and subsequently not ejected at the end of the cycle. Instead the molten material remaining in the hot runner system after injection of a component types a part of the next shot. Many different types of gating may be used to attach the runner system to the mould cavities. Gates are preferably as small as attainable in an effort to minimise the potential u2018witnessu2019 mark on the component. It may be seen that a sprue and a cavity kind within the mould creates the element shape, these could also be machined immediately into solid steel or aluminium plates, or made separately as inserts which can be subsequently fitted to the core and cavity supporting plates. In this explicit instance, hardened pins are used to eject the parts from the mould, these are fastened right into a rear ejector plate which is related to a hydraulic actuator behind the transferring platen. A profiled ejector pin behind the sprue bush ensures separation of sprue from sprue bush when the mould opens and aids ejection of the runner system. Cooling channels are machined into the core and cavity plates as a way to remove the method heat from the tool. The entire instrument is held along with a system of spacer blocks, bolster and backing plates such that it could be bolted on to the machine platens and is totally rigid and able to withstand injection forces.

silanoraz
Download Presentation

plastik enjeksiyon ve kalıp imalatı

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Plastik enjeksiyon ve kalıp imalatı At this stage within the machine cycle the helical form injection screw (Figure 1) is in a 'screwed again' place with a charge of molten thermoplastic material in front of the screw tip roughly equivalent to or barely bigger than that amount of molten material required to fill the mould cavity. Injection moulding screws are usually designed with length to diameter ratios in the region of 15:1 to 20:1, and compression ratios from rear to entrance of round 2 : 1 to 4 : 1 in an effort to allow for the gradual densification of the thermoplastic materials as it melts. A examine valve is fitted to the front of the screw similar to to let material cross by way of in entrance of the screw tip on metering (materials dosing), but not allow material to flow again over the screw flights on injection. The screw is contained within a barrel which has a hardened abrasion resistant internal surface. uygun fiyatlı fason imalat Normally, ceramic resistance heaters are fitted across the barrel wall, these are used to primarily warmth the thermoplastic material within the barrel to the required processing temperature and make up for warmth loss by the barrel wall, resulting from the truth that, during processing a lot of the warmth required for processing is generated via shear imparted by the screw. Thermocouple pockets are machined deep into the barrel wall in order to offer a reasonable indication of soften temperature. Heat input can due to this fact be closed loop managed with a Proportional Integral and Derivative (PID) system. The screw (non-rotating) is driven ahead underneath hydraulic pressure to discharge the thermoplastic materials out of the injection barrel by way of the injection nozzle, which kinds an interface between barrel and mildew, and into the moulding software itself.

More Related