1 / 30

Glenair Military and Industrial Power and Signal Connectors

Glenair Military and Industrial Power and Signal Connectors. Derived from MIL-DTL-5015 and VG95234 Mating mechanism (3 reverse bayonets at 120°) derived from VG95234 With and without (ITB) steel stud on the receptacle

sibley
Download Presentation

Glenair Military and Industrial Power and Signal Connectors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Glenair Military and Industrial Power and Signal Connectors

  2. Derived from MIL-DTL-5015 and VG95234 Mating mechanism (3 reverse bayonets at 120°) derived from VG95234 With and without (ITB) steel stud on the receptacle Several options available: platings, insert materials, contacts, backshell terminations, etc. FRITS version for Mass Transit Market uses fire resistant inserts. Series ITS (And FRITS) 5015 Type Reverse Bayonet Connectors

  3. Series ITS Exploded View: Straight Plug and Box Mount Receptacle Box mount receptacle Straight plug Front O-Ring Shell Insert Crimp Contacts Coupling nut Grommet Compression ring Internal O-Ring Backshell Sleeve Cable clamp Receptacle Insert Crimp Contacts Grommet Compression ring Internal O-Ring Backshell

  4. ITS Connector Series and Backshells

  5. ITS Series Platings ROHS Compliance

  6. Size 20, 18, 16, 12, 8, 4, 0, 4/0 crimp contacts. Over 200 insert arrangements. Available 8 AWG coaxial contacts Aluminum alloy with cadmium-free surface coatings. -55° C to +125° C continuous temperature rating Chemical and moisture resistant synthetic rubber inserts 7.5 to 350 AMPS depending on contact selection. Operating voltage by service ratings: A: 250 VDC D: 700 VDC E: 1250 VDC B: 2450 VDC C: 4200 VDC Series ITS Specifications

  7. Series FRITS - STR STR backshells lock the cables or wires inside the connector, assuring IP67 environmental rating. • Possible to use different cable gages with each connector size. • Termination of multiscreened cables is accomplished by locking the braids between sectors. • Availability of different terminations for PG or Metric cable glands, rubber conduits, etc.

  8. Threaded connector derived from MIL-DTL-5015 and VG95234 Insert arrangemements: from MIL-DTL-5015, 1 to 150 contacts Contact current rating: 7.5A to 350A Silver or gold plated crimp and solder contacts Applications: Automatic machines, brushless motors, welders, encoders, agricultural machines, trains Intermateable with certain competitor products Keyed polarization Broad range of accessory fittings Series IT 5015 Type Threaded Coupling Connectors

  9. Easy-to Assemble 5015 type connector with fifteen insert arrangements with size 8, 12, 16 and 20 contacts Conforms to VG95234, NFF 6103 and BS 6853 Low fire hazard plastic insert, gold plated copper contacts Offers rapid assembly and better electrical insulation Series ITH Rigid Insert Power and Signal Connectors

  10. Series ITH : Exploded view of plug and receptacle connector INSERT WITH W,X,Y,Z POLARIZATION KEYS Metallic Clip Removable Insert

  11. Another connector derived form 5015, with insert arrangements from 1 to 150 contacts Fast mating trapezoidal thread mating 5 connector sizes Current rating: 7.5A to 350A ITZ Connectors

  12. Derived from MIL-C-26482-Series I and VG95328 Insert arrangements with 2 to 61 contacts and 7 contact sizes Current rating: 7.5A to 13A Intermateable with MIL-C-26482 Series I and VG95328 Compatibility as well to BS9522 F0017 Specials or custom designs available Various classes available IPT Connectors

  13. IPT Connector Exploded View Wall mount receptacle Straight plug Shell Contacts' insert Contacts Coupling nut Grommet Compression ring Backshell Cable clamp Internal O-Ring Receptacle Contacts' insert Contacts Grommet Compression ring Backshell

  14. Series 900 Power Connectors • Very robust heavy duty connector • Used in harsh environmental applications in Mass Transit • Withstands high vibration and shock while mantaining an excellent watertight seal • Coupling nut and backshell can be rubber covered • Crimp type contacts for high current as well as coax, triax, twinax • Current rating: 200-400A • Working Voltage: 900-2000 Vac • IP 67 when mated or protected with required sealing components

  15. Series 900 Power Connectors • Medium to low voltage rail connectors used in car-to-car connections • Current rating: 400A Max • IP68 environmental rating • Stainless Steel receptacle protective flop lid • Rubber coated shells conform to fire resistance standards

  16. IRT Series Power Connectors High Power Rectangular Series Used to Connect: • Bogey (Truck) Frame • Engine-Frame • Freight Car Power

  17. IRT Series Power Connectors 3 pole power connector with size 4/0 solder contacts - Conductive front side (for continuity when the connector is mated) - Terminals for joint of friction pipes 3530 according to UNI4883 standard. TECHNICAL CHARACTERISTICS: - Contacts section: 3 x 70 mm² - Working current: 350 A max - Working voltage: 3000 Vac - Test voltage: 8000 Vac - Working temperature: (from -25 to +70)°C - Coupling force: < 200 N - Environmental rating (mated connector): IP67

  18. Series IGE: Single Pole Power Connectors • Single pole connectors used for transmission of high currents with low voltage, as, for example, on military vehicles or industrial equipment. • Reverse bayonet coupling • 5 connector sizes • Current Rating: 225A to 950A

  19. VG96929 (IGE) Connectors SHELLS Material: Aluminum alloy per QQP 416 Type II Class C Plating: Olive drab over cadmium INSERTS Material: PTFE ( Teflon) CONTACTS Contact identification: Z for Pins F for Sockets Material: Copper Alloy Plating: Silver Supported Cable Sizes: Size 16 H2= 25mm² Size 18 H5= 50mm² Size 22 H9= 90mm² Size 28 H15=150mm² Size 32 H24= 240mm²

  20. VG96929 (IGE) Connectors Box mount receptacle Receptacle Rear O-ring Front insert Threaded pin contact Rear insert

  21. VG96929 (IGE) Connectors Straight plug Coupling nut Front O-ring Shell Front insert Crimp socket contact Rear insert

  22. VG96929 (IGE) Connectors CURRENT RATING AT 125°C Shell size 16 18 22 24 32 Contact size H2 H5 H9 H15 H24 Max.Current 225 350 570 750 950 Max. short-time load (approx. 0,5-1 sec) 750 1K 2K 3K 5K VOLTAGE Test Voltage: 1050 Vac Working Voltage: 350 Vac Max. according to MIL-STD-1344

  23. UniPower Connectors • Single pole power connectors • Color coded poloarization • Current rating: 245A • Working voltage: 1500 Vde • UL94-V0 plastic body with silver plated contacts

  24. UniPower Connectors • UniPower provides safe and reliable connections in power distribution systems. • Available in four formats (Panel Drain, Panel Source, Line Drain, Line Source). • Includes three phases (L1-L2-L3), earth (G) and neutral (N). Typically used for applications in motors, generators, power distribution boxes. • Current rating: 600A max • Plastic bodies are fire resistant and high impact resistant • Watertightness in mated condition • Mechanically and color coded • Daisy chain available

  25. UniPower Technical Characteristics • CABLE SECTION : UNIPOWER 400 (Standard) : 120mm² MaxUNIPOWER 800 (Standard) : 300mm² Max • MAX CURRENT : UNIPOWER 400 : 400A @ < 70° C • MAX CURRENT : UNIPOWER 800 : 800A @ < 70° C • MAX EARTH VOLTAGE : 2Kv AC - 3Kv DC • MIN FLASHOVER : 9.5Kv AC/DC (peak) • OPERATING TEMPERATURE : -30° +125° C • INSULATING RESISTANCE : > 50 MOhm @ 500 VDC • ENVIRONMENTAL PROTECTION : up to IP67 (coupled connector) • EL. ANTISHOCK PROTECTION : IP2X FLAME RESISTANCE • HEAT/FLAME RESISTANCE : EN60309-I/BS550.7.5.4 • MECHANICAL STRENGTH : EN60309-I/BS550.7.5.4

  26. UniPower Contacts HIGH CONDUCTIVE CONTACT, NUT & SPRING WASHER (for PANEL DRAIN) HIGH CONDUCTIVITY MULTIPOINT CONTACT FINGER TOUCH INSULATING TIP HEX SET SCREW COMPRESSION SLEEVE (for LINE SOURCE AND LINE DRAIN)

  27. Miniatueized bayonet connector with spring loaded, self-cleaning contacts 7 and 10 poles according to VG 95351 and VG 96934 Glenair product to be qualified Used on the telecommunication units, especially mobile, to connect: Microphones Headphones Auxiliary equipment like adapters, amplifiers , sensors CB Connectors: Miniature Audio Connectors for Military Applications

  28. MAIN CHARACTERISTICS Resistance to extreme environmental conditions Waterproof in the unmated condition High reliability at low current and voltage Antimagnetic properties High protection against EMI-RFI Gold plated, copper contacts with solder type or dip-solder terminations CB Connectors: Performance

  29. Ruggedized Power and Signal Connectors for Military, Industrial, Entertainment, Telecom and Rail Applications Industrial / Commercial Rail Telecom Military Entertainment

More Related