1 / 5

Get Dell EMC DCAPE-100 VCE Exam 2018 - [DOWNLOAD and Prepare]

Dell EMC DCAPE-100 VCE Exam Software – GET LATEST EXAM QUESTIONS 2018:<br>The Dell EMC PowerEdge Associate exam DCAPE-100 is a 75 minute assessment with 55 questions. Likewise, the Dell EMC DCAPE-100 PowerEdge certification exam verifies the candidate's acquaintance and core understanding with the Dell PowerEdge Installation and Configuration. DCAPE-100 VCE Exam Software exam is associated with the PowerEdge Certification. 75 Exam helps you to upgrade credential, as the content is aligned with the exam. https://www.vceexamstest.com/DCAPE-100-vce-test.html

shopia
Download Presentation

Get Dell EMC DCAPE-100 VCE Exam 2018 - [DOWNLOAD and Prepare]

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Questions & Answers PDF Page 1 Dell DCAN-100 Exam Dell Dell Networking Associate Exam Exam Thank you for downloading DCAN-100 exam PDF Demo You can also try our DCAN-100 practice exam software Download Free Demo: https://www.vceexamstest.com/DCAN-100.html https://www.vceexamstest.com

  2. Questions & Answers PDF Page 2 Version: 8.0 Question: 1 A customer is using the following subnets in their environment: Desktops 192.168.1.0/24 Servers192.168.2.0/24 Printers 192.168.7.0/24 DMZ 172.16.10.0/24 The customer has run out of IP space in their desktop subnet. More IPs for desktops must be provided with the least disruptive change to the environment. Which desktop subnet meets the requirements? A. 192.168.6.0/24 B. 192.168.2.0/23 C. 192.168.4.0/23 D. 192.168.0.0/23 Answer: D Question: 2 Which of the following is the IPv6 loopback? A. 1: :/128 B. : :0/128 C. : :1/128 D. 1::1/0 Answer: C Question: 3 A technician needs to create multiple subnets to make sure there are at least 20 available IP addresses per subnet. Which three subnets meet the requirements for the 172.21.254.0/25 network. (Choose three.) A. 172.21.254.48/27 B. 172.21.254.0/27 C. 172.21.254.96/27 D. 172.21.254.16/27 E. 172.21.254.64/27 F. 172.21.254.98/27 https://www.vceexamstest.com

  3. Questions & Answers PDF Page 3 Answer: B,C,E Question: 4 A technician is applying a switch configuration to an N-Series switch to provide Internet access to all connected subnets. The technician has connected a computer and assigned it an IP address, subnet mask, DNS, and gateway address. The technician is unable to browse the Internet from that computer. What is causing the issue? A. DHCP Snooping has blocked the host. B. The static routes in the configuration file are incorrect. C. The “ip helper-address” command is configured on the switch. D. Spanning Tree blocked the port going to the PC. Answer: B Question: 5 A technician configures RIP on a new N-Series switch to connect to an existing switch that runs RIP. The routing table is not populating even after the network statements are added. What is a possible cause of this issue? A. The existing switch has not been configured with the command “hostroutesaccept”. B. The new switch’s interface is in the wrong subnet to form a RIP relationship. C. The “ip helper-address” command has not been configured on the existing switch. D. The other switch is not a root bridge and cannot form an RIP relationship. Answer: B Question: 6 A technician needs to add an IP for management. When adding an IP, the technician received the following message: Console (config-if-vlan1) #ip address 10.16.24.32/27 Failed to set IP address on interface. What is causing this message? A. An IP cannot be assigned to VLAN 1. B. A subnet address cannot be assigned to a VLAN. C. /27 cannot be used in an address command. D. A host address cannot be assigned to a VLAN. Answer: B https://www.vceexamstest.com

  4. Questions & Answers PDF Page 4 https://www.vceexamstest.com

  5. Questions & Answers PDF Page 5 Thank You for trying DCAN-100 PDF Demo To try our DCAN-100 practice exam software visit link below https://www.vceexamstest.com/DCAN-100.html Start Your DCAN-100 Preparation [Limited Time Offer] Use Coupon“20OFF” for special 20% discount on your purchase. Test your DCAN-100 preparation with actual exam questions. https://www.vceexamstest.com

More Related