1 / 39

390 likes | 642 Views

A Greatest Common Divisor (GCD) Processor. Lecture L5.3. Euclid’s GCD algorithm. GCD(9,15) x = 9 y = 15 y = 15 – 9 = 6 x = 9 – 6 = 3 y = 6 – 3 = 3 GCD(9,15) = 3. 1: int x, y; 2: x = x_input; 3: y = y_input; 4: while (x != y) 5: { 6: if (x<y) 7: y = y-x; 8: else

Download Presentation
## A Greatest Common Divisor (GCD) Processor

**An Image/Link below is provided (as is) to download presentation**
Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.
Content is provided to you AS IS for your information and personal use only.
Download presentation by click this link.
While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.
During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

**A Greatest Common Divisor(GCD) Processor**Lecture L5.3**Euclid’s GCD algorithm**GCD(9,15) x = 9 y = 15 y = 15 – 9 = 6 x = 9 – 6 = 3 y = 6 – 3 = 3 GCD(9,15) = 3 1: int x, y; 2: x = x_input; 3: y = y_input; 4: while (x != y) 5: { 6: if (x<y) 7: y = y-x; 8: else 9: x = x-y; 10: } 11: output = x;**1: int x, y;**2: x = x_input; 3: y = y_input; 4: while (x != y) 5: { 6: if (x<y) 7: y = y-x; 8: else 9: x = x-y; 10: } 11: output = x;**1: int x, y;**2: x = x_input; 3: y = y_input; 4: while (x != y) 5: { 6: if (x<y) 7: y = y-x; 8: else 9: x = x-y; 10: } 11: output = x;**1: int x, y;**2: x = x_input; 3: y = y_input; 4: while (x != y) 5: { 6: if (x<y) 7: y = y-x; 8: else 9: x = x-y; 10: } 11: output = x;**1: int x, y;**2: x = x_input; 3: y = y_input; 4: while (x != y) 5: { 6: if (x<y) 7: y = y-x; 8: else 9: x = x-y; 10: } 11: output = x;**1: int x, y;**2: x = x_input; 3: y = y_input; 4: while (x != y) 5: { 6: if (x<y) 7: y = y-x; 8: else 9: x = x-y; 10: } 11: output = x;**1: int x, y;**2: x = x_input; 3: y = y_input; 4: while (x != y) 5: { 6: if (x<y) 7: y = y-x; 8: else 9: x = x-y; 10: } 11: output = x;**1: int x, y;**2: x = x_input; 3: y = y_input; 4: while (x != y) 5: { 6: if (x<y) 7: y = y-x; 8: else 9: x = x-y; 10: } 11: output = x;**1: int x, y;**2: x = x_input; 3: y = y_input; 4: while (x != y) 5: { 6: if (x<y) 7: y = y-x; 8: else 9: x = x-y; 10: } 11: output = x;**1: int x, y;**2: x = x_input; 3: y = y_input; 4: while (x != y) 5: { 6: if (x<y) 7: y = y-x; 8: else 9: x = x-y; 10: } 11: output = x;**1: int x, y;**2: x = x_input; 3: y = y_input; 4: while (x != y) 5: { 6: if (x<y) 7: y = y-x; 8: else 9: x = x-y; 10: } 11: output = x;**1: int x, y;**2: x = x_input; 3: y = y_input; 4: while (x != y) 5: { 6: if (x<y) 7: y = y-x; 8: else 9: x = x-y; 10: } 11: output = x;**1: int x, y;**2: x = x_input; 3: y = y_input; 4: while (x != y) 5: { 6: if (x<y) 7: y = y-x; 8: else 9: x = x-y; 10: } 11: output = x;**clr**clk clr clk Z GCD Control Unit GCD Datapath C PA PB r0ld r1ld PE wld stld msel(1:0) alusel(2:0) GCD**gcdpath.vhd**-- Title: GCD Datapath library IEEE; use IEEE.STD_LOGIC_1164.all; use IEEE.std_logic_unsigned.all; use work.gcd_components.all; entity GCDpath is generic(width:positive); port( PA: in STD_LOGIC_VECTOR (width-1 downto 0); PB: in STD_LOGIC_VECTOR (width-1 downto 0); alusel: b STD_LOGIC_VECTOR (2 downto 0); msel: in STD_LOGIC_VECTOR (1 downto 0); r0ld, r1ld, stld, wld: in STD_LOGIC; clr, clk: in STD_LOGIC; C, Z: out STD_LOGIC; PE: out STD_LOGIC_VECTOR (width-1 downto 0) ); end GCDpath;**a**s y gcdpath.vhd (cont.) architecture GCDpath_arch of GCDpath is signal y, a, PEs, PCs, PDs: std_logic_vector(width-1 downto 0); signal s, status: std_logic_vector(3 downto 0); constant bus_width: integer := 4; constant status_width: integer := 4; begin**a**s y gcdpath.vhd (cont.) alu1: alu generic map(width => bus_width) port map (a => a, b => PEs, alusel => alusel, status => s, y => y); R0: reg generic map(width => bus_width) port map (d => y, load =>r0ld, clr => clr, clk =>clk, q => PDs); R1: reg generic map(width => bus_width) port map (d => y, load => r1ld, clr => clr, clk =>clk, q => PCs); stat: reg generic map(width => status_width) port map (d => s, load =>stld, clr => clr, clk =>clk, q => status);**a**s y gcdpath.vhd (cont.) W: reg generic map(width => bus_width) port map (d => y, load => wld, clr => clr, clk =>clk, q => PEs); M1: mux4g generic map(width => bus_width) port map (a => PA, b => PB, c => PCs, d => PDs, sel => msel, y => a); C <= status(0); Z <= status(2); PE <= PEs; end GCDpath_arch;**clr**clk clr clk Z GCD Control Unit GCD Datapath C PA PB r0ld r1ld PE wld stld msel(1:0) alusel(2:0) GCD**1: int x, y;**2: x = x_input; 3: y = y_input; 4: while (x != y) 5: { 6: if (x<y) 7: y = y-x; 8: else 9: x = x-y; 10: } 11: output = x;**VHDLMealy Machine**process(present_state, x) init C1 C2 s(t+1) State Register next state s(t) z(t) present state x(t) present input process(present_state, x) clk process(clk, init)**gcd_control.vhd**-- Title: GCD Control Unit library IEEE; use IEEE.std_logic_1164.all; use IEEE.std_logic_unsigned.all; entity gcd_control is port ( clr: in STD_LOGIC; clk: in STD_LOGIC; Z: in STD_LOGIC; C: in STD_LOGIC; alusel: out STD_LOGIC_VECTOR (2 downto 0); msel: out STD_LOGIC_VECTOR (1 downto 0); r0ld, r1ld, stld, wld: out STD_LOGIC ); end gcd_control;**gcd_control.vhd (cont.)**architecture gcd_control_arch of gcd_control is type state_type is (s0, s1, s2, s3, s4, s5, s6, s7); signal current_state, next_state: state_type; begin statereg: process(clk, clr) -- the state register begin if clr = '1' then current_state <= s0; elsif (clk'event and clk = '1') then current_state <= next_state; end if; end process statereg;**gcd_control.vhd (cont.)**C1: process(current_state, Z, C) begin case current_state is when s0 => next_state <= s1; when s1 => next_state <= s2; when s2 => next_state <= s3; when s3 => next_state <= s4; when s4 => if Z = '1' then next_state <= s7; elsif C = '1' then next_state <= s5; else next_state <= s6; end if;**gcd_control.vhd (cont.)**when s5 => next_state <= s2; when s6 => next_state <= s2; when s7 => next_state <= s7; end case; end process C1;**a**s y gcd_control.vhd (cont.) C2: process(current_state) begin -- Initialize all outputs alusel <= "000"; msel <= "00"; r0ld <= '0'; r1ld <= '0'; stld <= '0'; wld <= '0'; case current_state is when s0 => -- R0 <- x r0ld <= '1' ; r1ld <= '0'; stld <= '1'; wld <= '0'; msel <= "00"; alusel <= "000";**a**s y gcd_control.vhd (cont.) when s1 => -- R1 <- Y r0ld <= '0' ; r1ld <= '1'; stld <= '1'; wld <= '0'; msel <= "01"; alusel <= "000"; when s2 => -- W <- R0 r0ld <= '0' ; r1ld <= '0'; stld <= '1'; wld <= '1'; msel <= "11"; alusel <= "000"; when s3 => -- W <- R1 - W r0ld <= '0' ; r1ld <= '0'; stld <= '1'; wld <= '1'; msel <= "10"; alusel <= "010";**a**s y gcd_control.vhd (cont.) when s4 => -- W <- R0 r0ld <= '0' ; r1ld <= '0'; stld <= '1'; wld <= '1'; msel <= "11"; alusel <= "000"; when s5 => -- R0 <- W - R1 r0ld <= '1' ; r1ld <= '0'; stld <= '1'; wld <= '0'; msel <= "10"; alusel <= "011"; when s6 => -- R1 <- R1 - W r0ld <= '0' ; r1ld <= '1'; stld <= '1'; wld <= '0'; msel <= "10"; alusel <= "010";**a**s y gcd_control.vhd (cont.) when s7 => -- W <- R0 r0ld <= '0' ; r1ld <= '0'; stld <= '1'; wld <= '1'; msel <= "11"; alusel <= "000"; whenothers => null; end case; end process C2; end gcd_control_arch;**clr**clk clr clk Z GCD Control Unit GCD Datapath C PA PB r0ld r1ld PE wld stld msel(1:0) alusel(2:0) GCD**GCD.vhd**-- Title: Greatest Common Divisor library IEEE; use IEEE.STD_LOGIC_1164.all; use IEEE.std_logic_unsigned.all; use work.GCD_components.all; entity GCD is generic(width:positive); port( PA: in STD_LOGIC_VECTOR ((width-1) downto 0); PB: in STD_LOGIC_VECTOR ((width-1) downto 0); clr, clk: in STD_LOGIC; PE: out STD_LOGIC_VECTOR ((width-1) downto 0) ); end GCD;**GCD.vhd (cont.)**architecture GCD_arch of GCD is signal alusel: std_logic_vector(2 downto 0); signal msel: std_logic_vector(1 downto 0); signal C, Z: std_logic; signal r0ld, r1ld, stld, wld: std_logic;**GCD.vhd (cont.)**begin U1: gcdpath generic map(width => width) port map (PA => PA, PB => PB, alusel => alusel, msel => msel, r0ld => r0ld, r1ld => r1ld, stld => stld, wld => wld, clr => clr, clk =>clk, PE => PE, C => C, Z => Z); U2: gcd_control port map (alusel => alusel, msel => msel, C => C, Z => Z, r0ld => r0ld, r1ld => r1ld, stld => stld, wld => wld, clr => clr, clk => clk); end GCD_arch;**GCDtest.vhd**-- Title: GCD Test library IEEE; use IEEE.STD_LOGIC_1164.all; use IEEE.std_logic_unsigned.all; use work.GCD_components.all; entity GCDtest is port( mclk : in STD_LOGIC; bn : in STD_LOGIC; SW : in STD_LOGIC_VECTOR(1 to 8); led: out std_logic; ldg : out STD_LOGIC; LD : out STD_LOGIC_VECTOR(1 to 8); AtoG : out STD_LOGIC_VECTOR(6 downto 0); A : out STD_LOGIC_VECTOR(3 downto 0) ); end GCDtest;**GCDtest.vhd (cont.)**architecture GCDtest_arch of GCDtest is signal r, p: std_logic_vector(15 downto 0); signal clr, clk, cclk, bnbuf: std_logic; signal clkdiv: std_logic_vector(26 downto 0); constant bus_width: positive := 4; begin U00: IBUFG port map (I => bn, O => bnbuf); led <= bnbuf; ldg <= '1'; -- enable 74HC373 latch clr <= bnbuf;**GCDtest.vhd (cont.)**-- Divide the master clock (50Mhz) process (mclk) begin if mclk = '1' and mclk'Event then clkdiv <= clkdiv + 1; end if; end process; clk <= clkdiv(0); -- 25 MHz cclk <= clkdiv(17); -- 190 Hz**GCDtest.vhd (cont.)**r(15 downto 4) <= "000000000000"; U1: GCD generic map(width => bus_width) port map (PA => SW(1 to 4), PB =>SW(5 to 8), clr => clr, clk =>clk, PE => r(3 downto 0)); U2: binbcd port map (B => r, P => p); U3: x7seg port map (x => p, cclk => cclk, clr => clr, AtoG => AtoG, A => A); LD <= SW; end GCDtest_arch;

More Related