1 / 14

XPCS and Science Opportunities at NSLS-II

Explore dynamic light scattering with x-rays through X-ray Photon Correlation Spectroscopy (XPCS) and discover opportunities for studying various materials, such as alloys, liquid crystals, polymers, and nanoparticles. NSLS-II will revolutionize XPCS with its improved detector technology.

shenley
Download Presentation

XPCS and Science Opportunities at NSLS-II

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. XPCS and Science Opportunities at NSLS-II Bob Leheny Johns Hopkins University

  2. Dynamic light scattering with x-rays X-ray Photon Correlation Spectroscopy Coherent Beam Autocorrelation of intensity… I(Q,t’) t’ Gives dynamic structure factor: g2(Q,t) t

  3. Inelastic X-ray Scattering Inelastic Neutron Scattering Raman Scattering Brillouin Scattering Laser PCS Frequency [Hz] XPCS (currently) Wavevector [Å-1] Examples of XPCS topics to date: Hard matter: • Order-disorder transitions in alloys • Charge density wave motion • Antiferromagnetic domain motion Soft matter: • Smectic liquid crystals • Polymers • Colloids • gels • surface & interfacial fluctuations • glass transitions • reptation • phase separation and mesophase ordering

  4. 10 ms ~ 100 ns 2 300 Signal-to-Noise in g2(Q,t): Prospects for NSLS-II (Falus et al., JSR 2006) = accumulation time (≈ minimum delay time t) = source brilliance = cross section per volume = energy bandpass Potential improvement at NSLS-II over APS (8-ID) x 30 • Intrinsic brilliance x 10 • Optimization of coherent flux - vertical focusing - wider Consequences: • Weaker scatterers become accessible. • Minimum delay time shortens substantially:

  5. Inelastic X-ray Scattering Inelastic Neutron Scattering Raman Scattering Brillouin Scattering Laser PCS Frequency [Hz] Projected for NSLS-II XPCS Wavevector [Å-1] What occurs in 100 ns? Overlap with Neutron Spin Echo in reach! S(Q,t) from 10-11 s < t < 104 s E.g., a 6 nm sphere in water diffuses its diameter Nanoscale dynamics in aqueous solution become accessible to XPCS Suggests studies of: • nanoparticle motion/self-assembly in low-viscosity solutions in bulk and on surfaces • biologically relevant systems

  6. Fluctuations in lipid membranes at Q ≈ 0.03 - 0.1 nm-1 t ≈ 10-6 s NSE of higher Q dispersion indicates: Potentially interesting range of length scales could be accessible at NSLS-II protein conformation membrane elastic modulus protein conformation • • active fluctuations driven by protein dynamics

  7. d ~ 10 nm Another membrane system: bicontinuous microemulsions Long-standing theoretical predictions for dynamical behavior. water oil Important in applications e.g. unique nanostructured materials through polymerization templates for chemical reactions Fluctuations at relevant wave vectors (~2p/d): too slow for NSE, too short for DLS well suited for XPCS at NSLS-II Gompper et al. • Numerous such nanostructured soft materials have intrinsic dynamics in the window that NSLS-II will fill. Others likely include lamellar phases (smectics), ringing gels, etc.

  8. Protein & protein complex conformational fluctuations • Fluctuations involving large-scale conformational changes can occur on microseconds to milliseconds. t ~ 100 ms • Potentially important for function. e.g. enzymatic activity Enzyme from E. coli H. Yang, UC Berkeley • Potential strategies to access fluctuations with XPCS: • Time dependence of diffuse scattering around bragg peaks of protein crystals (???) • Deviations of diffusion from rigid-body behavior - Demonstrated with NSE for domain-scale fluctuations (t ~ 10 ns) (Z. Bu et al., PNAS 2005)

  9. • Access to shorter times higher Q Other interesting opportunities with XPCS at NSLS-II Reptation • Highly successful phenomenological model 1) Expanding polymer research: • Motion accessible to XPCS (Lumma et al,. PRL, 2001) • Broader dynamic range will illuminate: - Specific nature of relaxation (e.g., constraint release) - Rouse-to-reptation crossover Surface fluctuations • Well suited for XPCS (Kim et al., PRL, 2003) - probe nature of fluctuations at molecular scales: Rg, entanglement length

  10. High T Low T increasing age ergodic fluid nonergodic solid 2) Local dynamics in glassy materials Approach to glass transition characterized by growing separation of time scales: “b” and “a” relaxations fast, localized motion slow, terminal relaxation accessed experimentally Eg., gelation and aging in nanocolloidal suspensions inferred APS, 8-ID NSLS-II will have dynamic range to track full relaxation spectrum.

  11. Systems far from equilibrium characterized by: Intermittent (non-Gaussian) dynamics Analysis beyond g2(Q,t) required. Spatial and/or temporal heterogeneity Eg., “degree of correlation”: dilute colloidal gels Large, non-Gaussian fluctuations temporal heterogeneity Duri & Cipelletti, EPL (2006)

  12. • Higher order moments: Other ideas from DLS for characterizing intermittent dynamics : (Lemieux and Durian, Appl. Opt. 2001) , etc. (Note: ) • Speckle-visibility spectroscopy (Bandyopadhyay et al., RSI 2006) Measure variance in speckle intensity as a function of exposure time. NSLS-II should make these (and other) analysis approaches feasible for XPCS.

  13. Conclusion NSLS-II will revolutionize XPCS. But, Realizing many of these advancements will require a corresponding improvement in detector technology…

  14. K = detector efficiency • T = total experiment duration • = accumulation time • = angle subtended by Q of interest • = scattering cross section per unit volume W = sample thickness • = 1/attenuation length B = source brilliance DE/E = normalized energy spread r = factor depending on source size, pixel size, and slit size

More Related