1 / 40

Worksheet(s) – Page 1

Worksheet(s) – Page 1. User02. User01. srcN+1. srcN. TG Src MI. TG Src MI. Filter1. Filter1. Neighbor Rtr Meta-interface. Filter2. Filter2. dstN+1. TG Dst MI. TG Dst MI. dstN. We are going to list the parameters you will need for Building a new MI

shadow
Download Presentation

Worksheet(s) – Page 1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Worksheet(s) – Page 1 User02 User01 srcN+1 srcN TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • We are going to list the parameters you will need for • Building a new MI • Adding a filter to route traffic from yoursrc to your neighbor’s dst • Adding a filter to route traffic coming from your neighbor’s src to your dst.

  2. Worksheet(s) – Page 2 User02 User01 srcN+1 srcN • User01 MI to Neighbor • My SPP: ____KANS___ • Other SPP: ____WASH___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: 10.1.3/4.1_______ (Arg0) • Other End Addr: ___10.1.3/4.2____ • Pick a Port Number ___X____ (Arg1) • Do NOT use port #’s in range 32768-49151 TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User02 MI to Neighbor • My SPP: ___WASH____ • Other SPP: ____KANS___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: ___10.1.3/4.2____ (Arg0) • Other End Addr: ___10.1.3/4.1____ • Pick a Port Number ___Y____(Arg1) • Do NOT use port #’s in range 32768-49151

  3. Worksheet(s) – Page 3 User02 User01 srcN+1 srcN • User01 Filter1 • Key DADDR (dstN+1): • MN DestAddr: __10.10.2.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ____>= 3_____ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: _10.1.3/4.2__ (Arg3) • Port on other end of MI: ____Y______ (Arg4) • Y from previous page UserN+1 “Pick a Port” TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User02 Filter1 • Key DADDR (dstN): • MN DestAddr: __10.10.1.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ___>= 3______ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: __10.1.3/4.1_ (Arg3) • Port on other end of MI: ____X______ (Arg4) • X from previous page UserN“Pick a Port”

  4. Worksheet(s) – Page 4 User02 User01 srcN+1 srcN • User01 Filter2 • Key DADDR (dstN): • MN DestAddr: __10.10.1.3___ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8) TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User02 Filter2 • Key DADDR (dstN+1): • MN DestAddr: ___10.10.2.3__ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8)

  5. Worksheet(s) – Page 1 User04 User03 srcN+1 srcN TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • We are going to list the parameters you will need for • Building a new MI • Adding a filter to route traffic from yoursrc to your neighbor’s dst • Adding a filter to route traffic coming from your neighbor’s src to your dst.

  6. Worksheet(s) – Page 2 User04 User03 srcN+1 srcN • User03 MI to Neighbor • My SPP: ____SALT___ • Other SPP: ____KANS___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: 10.1.1/2.1_______ (Arg0) • Other End Addr: ___10.1.1/2.2____ • Pick a Port Number ___X____ (Arg1) • Do NOT use port #’s in range 32768-49151 TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User04 MI to Neighbor • My SPP: ___KANS____ • Other SPP: ____SALT___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: ___10.1.1/2.2____ (Arg0) • Other End Addr: ___10.1.1/2.1____ • Pick a Port Number ___Y____(Arg1) • Do NOT use port #’s in range 32768-49151

  7. Worksheet(s) – Page 3 User04 User03 srcN+1 srcN • User03 Filter1 • Key DADDR (dstN+1): • MN DestAddr: __10.10.4.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ____>= 3_____ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: _10.1.1/2.2__ (Arg3) • Port on other end of MI: ____Y______ (Arg4) • Y from previous page UserN+1 “Pick a Port” TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User04 Filter1 • Key DADDR (dstN): • MN DestAddr: __10.10.3.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ___>= 3______ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: __10.1.1/2.1_ (Arg3) • Port on other end of MI: ____X______ (Arg4) • X from previous page UserN“Pick a Port”

  8. Worksheet(s) – Page 4 User04 User03 srcN+1 srcN • User03 Filter2 • Key DADDR (dstN): • MN DestAddr: __10.10.3.3___ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8) TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User04 Filter2 • Key DADDR (dstN+1): • MN DestAddr: ___10.10.4.3__ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8)

  9. Worksheet(s) – Page 1 User06 User05 srcN+1 srcN TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • We are going to list the parameters you will need for • Building a new MI • Adding a filter to route traffic from yoursrc to your neighbor’s dst • Adding a filter to route traffic coming from your neighbor’s src to your dst.

  10. Worksheet(s) – Page 2 User06 User05 srcN+1 srcN • User05 MI to Neighbor • My SPP: ____WASH___ • Other SPP: ____SALT___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: 10.1.7/8.1_______ (Arg0) • Other End Addr: ___10.1.7/8.2____ • Pick a Port Number ___X____ (Arg1) • Do NOT use port #’s in range 32768-49151 TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User06 MI to Neighbor • My SPP: ___SALT____ • Other SPP: ____WASH___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: ___10.1.7/8.2____ (Arg0) • Other End Addr: ___10.1.7/8.1____ • Pick a Port Number ___Y____(Arg1) • Do NOT use port #’s in range 32768-49151

  11. Worksheet(s) – Page 3 User06 User05 srcN+1 srcN • User05 Filter1 • Key DADDR (dstN+1): • MN DestAddr: __10.10.6.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ____>= 3_____ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: _10.1.7/8.2__ (Arg3) • Port on other end of MI: ____Y______ (Arg4) • Y from previous page UserN+1 “Pick a Port” TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User06 Filter1 • Key DADDR (dstN): • MN DestAddr: __10.10.5.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ___>= 3______ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: __10.1.7/8.1_ (Arg3) • Port on other end of MI: ____X______ (Arg4) • X from previous page UserN“Pick a Port”

  12. Worksheet(s) – Page 4 User06 User05 srcN+1 srcN • User05 Filter2 • Key DADDR (dstN): • MN DestAddr: __10.10.5.3___ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8) TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User06 Filter2 • Key DADDR (dstN+1): • MN DestAddr: ___10.10.6.3__ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8)

  13. Worksheet(s) – Page 1 User08 User07 srcN+1 srcN TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • We are going to list the parameters you will need for • Building a new MI • Adding a filter to route traffic from yoursrc to your neighbor’s dst • Adding a filter to route traffic coming from your neighbor’s src to your dst.

  14. Worksheet(s) – Page 2 User08 User07 srcN+1 srcN • User07 MI to Neighbor • My SPP: ____KANS___ • Other SPP: ____WASH___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: 10.1.3/4.1_______ (Arg0) • Other End Addr: ___10.1.3/4.2____ • Pick a Port Number ___X____ (Arg1) • Do NOT use port #’s in range 32768-49151 TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User08 MI to Neighbor • My SPP: ___WASH____ • Other SPP: ____KANS___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: ___10.1.3/4.2____ (Arg0) • Other End Addr: ___10.1.3/4.1____ • Pick a Port Number ___Y____(Arg1) • Do NOT use port #’s in range 32768-49151

  15. Worksheet(s) – Page 3 User08 User07 srcN+1 srcN • User07 Filter1 • Key DADDR (dstN+1): • MN DestAddr: __10.10.8.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ____>= 3_____ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: _10.1.3/4.2__ (Arg3) • Port on other end of MI: ____Y______ (Arg4) • Y from previous page UserN+1 “Pick a Port” TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User08 Filter1 • Key DADDR (dstN): • MN DestAddr: __10.10.7.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ___>= 3______ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: __10.1.3/4.1_ (Arg3) • Port on other end of MI: ____X______ (Arg4) • X from previous page UserN“Pick a Port”

  16. Worksheet(s) – Page 4 User08 User07 srcN+1 srcN • User07 Filter2 • Key DADDR (dstN): • MN DestAddr: __10.10.7.3___ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8) TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User08 Filter2 • Key DADDR (dstN+1): • MN DestAddr: ___10.10.8.3__ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8)

  17. Worksheet(s) – Page 1 User10 User09 srcN+1 srcN TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • We are going to list the parameters you will need for • Building a new MI • Adding a filter to route traffic from yoursrc to your neighbor’s dst • Adding a filter to route traffic coming from your neighbor’s src to your dst.

  18. Worksheet(s) – Page 2 User10 User09 srcN+1 srcN • User09 MI to Neighbor • My SPP: ____SALT___ • Other SPP: ____KANS___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: 10.1.1/2.1_______ (Arg0) • Other End Addr: ___10.1.1/2.2____ • Pick a Port Number ___X____ (Arg1) • Do NOT use port #’s in range 32768-49151 TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User10 MI to Neighbor • My SPP: ___KANS____ • Other SPP: ____SALT___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: ___10.1.1/2.2____ (Arg0) • Other End Addr: ___10.1.1/2.1____ • Pick a Port Number ___Y____(Arg1) • Do NOT use port #’s in range 32768-49151

  19. Worksheet(s) – Page 3 User10 User09 srcN+1 srcN • User09 Filter1 • Key DADDR (dstN+1): • MN DestAddr: __10.10.10.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ____>= 3_____ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: _10.1.1/2.2__ (Arg3) • Port on other end of MI: ____Y______ (Arg4) • Y from previous page UserN+1 “Pick a Port” TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User10 Filter1 • Key DADDR (dstN): • MN DestAddr: __10.10.9.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ___>= 3______ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: __10.1.1/2.1_ (Arg3) • Port on other end of MI: ____X______ (Arg4) • X from previous page UserN“Pick a Port”

  20. Worksheet(s) – Page 4 User10 User09 srcN+1 srcN • User09 Filter2 • Key DADDR (dstN): • MN DestAddr: __10.10.9.3___ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8) TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User10 Filter2 • Key DADDR (dstN+1): • MN DestAddr: ___10.10.10.3__ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8)

  21. Worksheet(s) – Page 1 User12 User11 srcN+1 srcN TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • We are going to list the parameters you will need for • Building a new MI • Adding a filter to route traffic from yoursrc to your neighbor’s dst • Adding a filter to route traffic coming from your neighbor’s src to your dst.

  22. Worksheet(s) – Page 2 User12 User11 srcN+1 srcN • User11 MI to Neighbor • My SPP: ____WASH___ • Other SPP: ____SALT___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: 10.1.7/8.1_______ (Arg0) • Other End Addr: ___10.1.7/8.2____ • Pick a Port Number ___X____ (Arg1) • Do NOT use port #’s in range 32768-49151 TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User12 MI to Neighbor • My SPP: ___SALT____ • Other SPP: ____WASH___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: ___10.1.7/8.2____ (Arg0) • Other End Addr: ___10.1.7/8.1____ • Pick a Port Number ___Y____(Arg1) • Do NOT use port #’s in range 32768-49151

  23. Worksheet(s) – Page 3 User12 User11 srcN+1 srcN • User11 Filter1 • Key DADDR (dstN+1): • MN DestAddr: __10.10.12.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ____>= 3_____ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: _10.1.7/8.2__ (Arg3) • Port on other end of MI: ____Y______ (Arg4) • Y from previous page UserN+1 “Pick a Port” TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User12 Filter1 • Key DADDR (dstN): • MN DestAddr: __10.10.11.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ___>= 3______ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: __10.1.7/8.1_ (Arg3) • Port on other end of MI: ____X______ (Arg4) • X from previous page UserN“Pick a Port”

  24. Worksheet(s) – Page 4 User12 User11 srcN+1 srcN • User11 Filter2 • Key DADDR (dstN): • MN DestAddr: __10.10.11.3___ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8) TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User12 Filter2 • Key DADDR (dstN+1): • MN DestAddr: ___10.10.12.3__ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8)

  25. Worksheet(s) – Page 1 User14 User13 srcN+1 srcN TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • We are going to list the parameters you will need for • Building a new MI • Adding a filter to route traffic from yoursrc to your neighbor’s dst • Adding a filter to route traffic coming from your neighbor’s src to your dst.

  26. Worksheet(s) – Page 2 User14 User13 srcN+1 srcN • User13 MI to Neighbor • My SPP: ____KANS___ • Other SPP: ____WASH___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: 10.1.3/4.1_______ (Arg0) • Other End Addr: ___10.1.3/4.2____ • Pick a Port Number ___X____ (Arg1) • Do NOT use port #’s in range 32768-49151 TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User14 MI to Neighbor • My SPP: ___WASH____ • Other SPP: ____KANS___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: ___10.1.3/4.2____ (Arg0) • Other End Addr: ___10.1.3/4.1____ • Pick a Port Number ___Y____(Arg1) • Do NOT use port #’s in range 32768-49151

  27. Worksheet(s) – Page 3 User14 User13 srcN+1 srcN • User13 Filter1 • Key DADDR (dstN+1): • MN DestAddr: __10.10.14.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ____>= 3_____ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: _10.1.3/4.2__ (Arg3) • Port on other end of MI: ____Y______ (Arg4) • Y from previous page UserN+1 “Pick a Port” TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User14 Filter1 • Key DADDR (dstN): • MN DestAddr: __10.10.13.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ___>= 3______ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: __10.1.3/4.1_ (Arg3) • Port on other end of MI: ____X______ (Arg4) • X from previous page UserN“Pick a Port”

  28. Worksheet(s) – Page 4 User14 User13 srcN+1 srcN • User13 Filter2 • Key DADDR (dstN): • MN DestAddr: __10.10.13.3___ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8) TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User14 Filter2 • Key DADDR (dstN+1): • MN DestAddr: ___10.10.14.3__ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8)

  29. Worksheet(s) – Page 1 User16 User15 srcN+1 srcN TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • We are going to list the parameters you will need for • Building a new MI • Adding a filter to route traffic from yoursrc to your neighbor’s dst • Adding a filter to route traffic coming from your neighbor’s src to your dst.

  30. Worksheet(s) – Page 2 User16 User15 srcN+1 srcN • User15 MI to Neighbor • My SPP: ____SALT___ • Other SPP: ____KANS___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: 10.1.1/2.1_______ (Arg0) • Other End Addr: ___10.1.1/2.2____ • Pick a Port Number ___X____ (Arg1) • Do NOT use port #’s in range 32768-49151 TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User16 MI to Neighbor • My SPP: ___KANS____ • Other SPP: ____SALT___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: ___10.1.1/2.2____ (Arg0) • Other End Addr: ___10.1.1/2.1____ • Pick a Port Number ___Y____(Arg1) • Do NOT use port #’s in range 32768-49151

  31. Worksheet(s) – Page 3 User16 User15 srcN+1 srcN • User15 Filter1 • Key DADDR (dstN+1): • MN DestAddr: __10.10.16.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ____>= 3_____ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: _10.1.1/2.2__ (Arg3) • Port on other end of MI: ____Y______ (Arg4) • Y from previous page UserN+1 “Pick a Port” TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User16 Filter1 • Key DADDR (dstN): • MN DestAddr: __10.10.15.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ___>= 3______ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: __10.1.1/2.1_ (Arg3) • Port on other end of MI: ____X______ (Arg4) • X from previous page UserN“Pick a Port”

  32. Worksheet(s) – Page 4 User16 User15 srcN+1 srcN • User15 Filter2 • Key DADDR (dstN): • MN DestAddr: __10.10.15.3___ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8) TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User16 Filter2 • Key DADDR (dstN+1): • MN DestAddr: ___10.10.16.3__ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8)

  33. Worksheet(s) – Page 1 User18 User17 srcN+1 srcN TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • We are going to list the parameters you will need for • Building a new MI • Adding a filter to route traffic from yoursrc to your neighbor’s dst • Adding a filter to route traffic coming from your neighbor’s src to your dst.

  34. Worksheet(s) – Page 2 User18 User17 srcN+1 srcN • User17 MI to Neighbor • My SPP: ____WASH___ • Other SPP: ____SALT___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: 10.1.7/8.1_______ (Arg0) • Other End Addr: ___10.1.7/8.2____ • Pick a Port Number ___X____ (Arg1) • Do NOT use port #’s in range 32768-49151 TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User18 MI to Neighbor • My SPP: ___SALT____ • Other SPP: ____WASH___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: ___10.1.7/8.2____ (Arg0) • Other End Addr: ___10.1.7/8.1____ • Pick a Port Number ___Y____(Arg1) • Do NOT use port #’s in range 32768-49151

  35. Worksheet(s) – Page 3 User18 User17 srcN+1 srcN • User17 Filter1 • Key DADDR (dstN+1): • MN DestAddr: __10.10.18.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ____>= 3_____ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: _10.1.7/8.2__ (Arg3) • Port on other end of MI: ____Y______ (Arg4) • Y from previous page UserN+1 “Pick a Port” TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User18 Filter1 • Key DADDR (dstN): • MN DestAddr: __10.10.17.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ___>= 3______ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: __10.1.7/8.1_ (Arg3) • Port on other end of MI: ____X______ (Arg4) • X from previous page UserN“Pick a Port”

  36. Worksheet(s) – Page 4 User18 User17 srcN+1 srcN • User17 Filter2 • Key DADDR (dstN): • MN DestAddr: __10.10.17.3___ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8) TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User18 Filter2 • Key DADDR (dstN+1): • MN DestAddr: ___10.10.18.3__ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8)

  37. Worksheet(s) – Page 1 User20 User19 srcN+1 srcN TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • We are going to list the parameters you will need for • Building a new MI • Adding a filter to route traffic from yoursrc to your neighbor’s dst • Adding a filter to route traffic coming from your neighbor’s src to your dst.

  38. Worksheet(s) – Page 2 User20 User19 srcN+1 srcN • User19 MI to Neighbor • My SPP: ____KANS___ • Other SPP: ____WASH___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: 10.1.3/4.1_______ (Arg0) • Other End Addr: ___10.1.3/4.2____ • Pick a Port Number ___X____ (Arg1) • Do NOT use port #’s in range 32768-49151 TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User20 MI to Neighbor • My SPP: ___WASH____ • Other SPP: ____KANS___ • Link between SPPs: • Look at “Current SPP Network” Slide!!! • My Addr: ___10.1.3/4.2____ (Arg0) • Other End Addr: ___10.1.3/4.1____ • Pick a Port Number ___Y____(Arg1) • Do NOT use port #’s in range 32768-49151

  39. Worksheet(s) – Page 3 User20 User19 srcN+1 srcN • User19 Filter1 • Key DADDR (dstN+1): • MN DestAddr: __10.10.20.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ____>= 3_____ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: _10.1.3/4.2__ (Arg3) • Port on other end of MI: ____Y______ (Arg4) • Y from previous page UserN+1 “Pick a Port” TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User20 Filter1 • Key DADDR (dstN): • MN DestAddr: __10.10.19.3___ (Arg2) • MI to send pkts to: _Neighbor • QID: ___>= 3______ (Arg5) • We have already used 0, 1, 2 for other Mis. • Chose something else • Addr on other end of MI: __10.1.3/4.1_ (Arg3) • Port on other end of MI: ____X______ (Arg4) • X from previous page UserN“Pick a Port”

  40. Worksheet(s) – Page 4 User20 User19 srcN+1 srcN • User19 Filter2 • Key DADDR (dstN): • MN DestAddr: __10.10.19.3___ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8) TG Src MI TG Src MI Filter1 Filter1 Neighbor Rtr Meta-interface Filter2 Filter2 dstN+1 TG Dst MI TG Dst MI dstN • User20 Filter2 • Key DADDR (dstN+1): • MN DestAddr: ___10.10.20.3__ (Arg6) • MI to send pkts to: TG DST • REUSE EXISTING VARIABLES!!! • QID: QID_DST_MI (Arg9) • Addr on other end of MI: HOST_TGDST_IPADDR(Arg7) • Port on other end of MI: HOST_TGDST_PORT(Arg8)

More Related