1 / 22

The Design Process Applying Value Analysis to Determine an Optimum Solution

This article explores the design process for determining the best solution for a window candle. It covers research, brainstorming, value analysis, applying constraints, and the preferred solution. It also provides information on relevant components and manufacturers.

sfortner
Download Presentation

The Design Process Applying Value Analysis to Determine an Optimum Solution

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The Design ProcessApplying Value Analysis to Determine an Optimum Solution by Prof. Bitar

  2. Abstraction & SynthesisHomework #2 Research Prior Art Brainstorm Possible Solutions HW#2 Abstraction & Synthesis Perform Value Analysis Viable Options Apply Constraints Preferred Solution

  3. Window Candle Block Diagram with Two Defined Blocks Photo Sensor Solar Cell Charge Controller Rechargeable Battery 1.2V NiCd DC-DC Boost Converter LED 3.2V 20mA Mode Selection Flickering Control

  4. Agilent White LED Spec. Sheet

  5. LED Specifications – Curves !Max. Forward Current vs. Voltage Check: 20mA @ 3.2V (Typical)

  6. Battery Specifications

  7. Battery SpecificationDischarge Curve

  8. DC-DC Boost ConverterInterface Specs • INPUT: 1.2V(Nominal) • Minimum ? (0.8V) • Maximum ? (1.6V) • OUTPUT: 20mA (constant current?) • 3.2V (Nominal for White) • 1.7V (Nominal for Red)

  9. Searching for Possible Boost Converters… • www.digikey.com • DC-DC Converters (4,561 IN STOCK!) • Narrowing Search (down to 47) • Step-Up (Boost) • Vmin ≤ 0.8V (why?) • Internal Switch • Number of Outputs (1) • Small Qty. Packaging (cut tape / tube) • Case…

  10. Package/Case Concerns… • For prototypes, through-hole packages (8-DIP, 16-Dip, etc.) are easiest to work with. • If chip is only available in surface-mount, avoid DFN, QFN, LLP and BGA packages since pins are underneath. • For surface-mount ic’s, try to get largest packages possible with gull-wing pins.

  11. Possible Manufacturers

  12. Also Ran Across Another Device!LED Driver IC’s… • www.digikey.com • LED Drivers (1,319 IN STOCK!) • Narrowing Search (down to 47) • Step-Up (Boost) • Vmin ≤ 0.8V (why?) • Internal Switch • Number of Outputs (1) • Small Qty. Packaging (cut tape / tube) • Case…avoid DFN, QFN, LLP, BGA

  13. Possible LED Drivers

  14. IC’s Making the First Cut(Just based on PRICE!)

  15. National - LM2623

  16. Typical Application Circuit(Constant Voltage Output)

  17. Note External Components… • Inductor • Capacitor(s) • Schottky Diode • Resistive Divider

  18. ST - L6920DB

  19. Typical Application Circuit(Note Fewer External Components!)

  20. Diodes/Zetex - ZXLD383ET5CT

  21. Typical Application Circuit

  22. Leaning Toward the Diodes/Zetex LED Driver • http://www.diodes.com/datasheets/ZXLD383.pdf • Pro’s • Price • Ease of Use (Few External Components) • Designed for My Application • Con’s • Single Manufacturer (Not Multiple Source!)

More Related