How to solve the Linksys e 1200 setup

1. How to solve the Linksys e 1200 setup? • At times the device fails to connect with the extender, or the extender fails to findan established connection with the internet. This is when you experienceLinksys • extender loginissues. Furthermore, you cannot handle advancedsetting configuration if there is a Linksys extender loginproblem. • Linksys e 1200 setupis very much dependent on the advanced setting. You haveto configure the same. You can only do so after logging in to the Linksys extender login page. • The extender login issues can be very frustrating. We would here look at some ofthe solutions. • Make sure that the computer has a connection with the Wi-Fi of the extender. You can check by clicking on the wireless utility section, where you can figure out the connected SSID. If the SSID of the extender is not connected to your computer,then try to make a proper network connection. Enter the correct password and join. After the connection is established, you can access the setup page of theextender. • Verify if the indicator light is on. You can know about the extender's status withthe assistance of an indicatorlight. • Perform power cycle. The power cycle involves disconnecting the extenderfrom the power source and then again connecting. For better information, use the user manual. • Ping Test. It determines whether the computer is connected with the extenderor not. If not configured, then the default IP address of the extender would be192. • 168.1.1. You can find out the IP address through the DHCP client table onyour router. • Reset the extender. For most technical problems resetting the device is amajor solution. • Conclusion

2. Extender login issuesare very common and frustrating. You cannot accessthe advanced settings. For Linksys e 1200 set up, you need to access theadvanced settings. In this article, I have described the best solutions to the loginissue. Source of Article:https://www.patreon.com/posts/54184312