1 / 17

Imperium Testing Results for JFE Iron Samples: Defect Analysis

Detailed findings of Imperium testing on iron samples from Chronix for JFE, identifying defects in rectangle and square samples using different testing methods.

selah
Download Presentation

Imperium Testing Results for JFE Iron Samples: Defect Analysis

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Results of Imperium Testing Prepared for Chronix By Chris Moody

  2. JFE • We received two samples from Chronix on behalf of JFE • Both samples were made of iron • The rectangle had a depth of 10.5mm and the square a depth of 16mm. • Flat bottom holes were detected in the rectangle using Pulse Echo testing. • Defects were found in the side walls of the square sample using Shear Wave testing.

  3. JFE Iron Rectangle

  4. JFE Iron Rectangle

  5. JFE Square

  6. JFE Square

  7. JFE Square This test was performed using a 19 degree angle of incidence to record the defects shown in the side wall of this picture.

  8. JFE Square This test was performed using a 18 degree angle of incidence to record the defect shown in the side wall of this picture.

  9. JFE Square This test was performed using a 21 degree angle of incidence to record the defects shown in the side wall of this picture.

  10. JFE Square This test was performed using a 21 degree angle of incidence to record the defects shown in the side wall of this picture.

More Related