'Measuring instrument' presentation slideshows

Wika Hydraulic comparison test pump | Seeautomation & Engineers

Test pumps serve as pressure generators for the testing, adjustment and calibration of mechanical and electronic pressure measuring instruments through comparative measurements. These units can be used in the laboratory or workshop, or on site at the measuring point. Easy operation By connecting the test item and a sufficiently accurate reference pressure measuring instrument to the test pump, the same pressure will act on both measuring instruments. By comparison of the two measured values at any given pressure value, a check of the accuracy and/or adjustment of the pressure measuring instrument under test can be carried out. Easy handling The model CPP1200-X comparison test pump is a hydraulic comparison test pump for generating pressure up to 1,200 bar. It is technically identical to the instrument base of the model CPB3800 pressure balance. The integrated dual-area spindle pump with switching valves enables rapid filling of the test system and smooth pressure generation. For More Information visit on:- www.seeautomation.com Our Mail I.D:- sales@seeautomation.com Contact Us:- 91-11-22012324 , 8144883403

856 views • 72 slides

Linear Measurements

Linear Measurements. References : 1. handbok of dimensional measurement 2. http://fetweb.ju.edu.jo/staff/me/jyamin/ 3. http://www.phy.uct.ac.za/courses/c1lab/vernier1.html. The measuring instrument / methods can be classified in various manner. Direct / indirect measuring.

725 views • 70 slides

U5MEA08-ENGG METROLOGY & INSTRUMENTATION

U5MEA08-ENGG METROLOGY & INSTRUMENTATION. UNIT- I METROLOGY UNITS AND MEASUREMENTS.

1.46k views • 60 slides

Forestry Equipment Identification for the National Forestry CDE

Forestry Equipment Identification for the National Forestry CDE. Developed by: Lynn Barber & Jim Galvin Computer Workshop, 6/27/02. Objectives. Students will be able to: Identify all equipment on the National Forestry CDE list. Describe the use of each piece of equipment. Tree Stick.

895 views • 55 slides

Forestry Equipment Identification for the National Forestry CDE

Forestry Equipment Identification for the National Forestry CDE. Developed by: Lynn Barber & Jim Galvin Computer Workshop, 6/27/02. Objectives. Students will be able to: Identify all equipment on the National Forestry CDE list. Describe the use of each piece of equipment. Tree Stick.

579 views • 55 slides

Tools of Research

Tools of Research. Goal of Research. To derive conclusions from a body of data and discover what was previously unknown tools are needed to facilitate this goal there are many kinds of tools because of the varied nature of the types of research, but there is a general set of tools.

842 views • 33 slides

Physics Chapter 1

Physics Chapter 1. What is Physics?. The study of the physical world with the use of basic concepts, equations and assumptions to describe the physical world. Any problem that deals with temperature, size, motion, position, shape or color involves physics. The Scientific Method.

751 views • 31 slides

Metrology & Statistical Quality Control

Metrology & Statistical Quality Control. 5 th Term Batch 2009. INTERCHANGEABILITY. Concept: Interchangeability refers to assembling a number of unit components taken at random from stock so as to buildup a complete assembly without fitting or adjustment

494 views • 25 slides

Automated Submerged Arc Welding

Automated Submerged Arc Welding. Note: movies will can only be viewed in full presentation mode with an Internet connection. Objective is to achieve high-quality welds. By eliminating or minimizing Lack of Fusion Lack of Penetration Undercuts Slag Entrapment Porosity

465 views • 21 slides

welcome TO

312 views • 15 slides

Chapter 21 Measurement Analysis

Chapter 21 Measurement Analysis. Measurement. It is important to define and validate the measurement system before collecting data. Without measurement we only have opinions The measurement system is the complete process used to obtain measurements.

412 views • 15 slides

INTRAPRENEURIAL ORIENTATION IN THE TRANSPORT INDUSTRY: A PILOT STUDY

INTRAPRENEURIAL ORIENTATION IN THE TRANSPORT INDUSTRY: A PILOT STUDY. Dr. C Schachtebeck. INTRODUCTION. Entrepreneurship - an engine for innovation, organisational growth, employment creation Importance of creating SMEs widely acknowledged

123 views • 12 slides

Aim: How do we record measurements?

Aim: How do we record measurements?. Do Now: Record the measurements of A, B, and C. 0 A 1 2 B C 3. Rule : State the digits that you know for certain and estimate one extra digit. This shows the precision of your measuring instrument.

218 views • 11 slides

Measurement and Scaling

Measurement and Scaling. By: Dr Manoj Kuamr. Measurement and Scaling.

123 views • 11 slides

Measuring Instruments Special Purpose Caliper

374 views • 10 slides

Length and Perimeter

Length and Perimeter. Measurements. All measurements are only approximations. No measurement is ever exact. Using a ruler with 0.5cm marking, We might measure this eraser to be 5.5 cm long. If we used a more precise ruler, with 0.1 cm markings, then we find the length to be 5.4 cm.

183 views • 7 slides

Measurement System Evaluation pp. 623-629

Measurement System Evaluation pp. 623-629. Needed because total variance of process recorded is the sum of process variation and measurement variation. Thus, when there is a special cause, always look first at measurment tool. Metrology: the science of measurement.

188 views • 7 slides

Hangzhou Shunhao Metalwork Co., Ltd.

Hangzhou Shunhao Metalwork Co., Ltd. is a professional manufacturer to design and produce all kinds of stainless-steel instrument case like stainless steel case and metal housing for measuring instrument producers. The company owns mighty development and design ability and at present it already has more than hundreds products, further more, its tooling moulds are all designed and developed by our experienced technical people. We not only consider ourselves as the supplier of instrument cases, but also deem ourselves as the customeru2019s cooperation partner, During the course of close intercourse with clients, we offer solution/method/suggestion for pressure and thermometer technique,which are designed and positional according to specific project.

14 views • 1 slides