'Input shaft' presentation slideshows

CLUTCHES

121. CLUTCHES. Figure 121-1 Typical automotive clutch assembly showing all related parts. (Courtesy of LUK ).

1.08k views • 61 slides

Manual Transmissions

1.52k views • 48 slides

Clutch Fundamentals

Clutch Fundamentals. Chapter 69. Objectives. Describe the basic clutch parts Explain the operation of the clutch Compare differences in clutch design Describe the different methods of releasing the clutch. Introduction. Clutch Found on vehicles with manually shifted transmissions

863 views • 24 slides

POWER TRANSMISSION Motion convertion

POWER TRANSMISSION Motion convertion. ROTARY TO LINEAR motion convertion is concerned with taking the rotational motion and torque from an actguator and producing a linear motion and force on the output Lead screw Rack and pinion Slider cranks Cams. Lead screws.

368 views • 22 slides

Forging new generations of engineers

Forging new generations of engineers. Mechanisms From Simple Machines. UNIVERSAL JOINT Transmits power when two shafts are not in line. Two spur gears reduce speed, increase torque and change the rotational direction of the shafts.

302 views • 17 slides

Clutch

Clutch.

195 views • 14 slides

Theta BSM Input Shaft Bolt change

Theta BSM Input Shaft Bolt change. 2012. 9. 17. Theta MPI BSM (Asan ?? ?? ). Torque only measurement. 2. Results Summary. Result Plots - GDI, Clamp Load. Result Plots - MPI, Clamp Load. M10x1.25P (Angle vs Clamping Force). YS = 54kN. Target Clamp load = 46kN. 6.

259 views • 12 slides

Chapter 33

Chapter 33. Manual Transaxles. Transaxle Features. The transmission section is very similar to a RWD transmission. The transaxle also contains the differential gearsets. Transaxles have no cluster gear assembly. The input shaft drives the output shaft directly. Transaxle Power Flow.

219 views • 10 slides

Park / Neutral

Power flow (BTRA). Park / Neutral. Engine. B2 (Lo-Re). F2 (1-2). Over shaft. Input shaft. C1. C4. C3. C2. F1 (3-4). Reverse sun gear. Forward sun gear. B1(2-4). Power flow (BTRA). Manual 1st gear (Gear ratio : 2.741). Engine. B2 (Lo-Re). F2 (1-2). Over shaft.

244 views • 9 slides

Manual transmission

Manual transmission. Ratios (ex.): 2.3:1, 1.6:1, 1.2:1, 1:1, 0.9:1 Parts Input shaft Layshaft Gears (incl. idler) Output shaft Dog collars Synchronizers. A Very Simple Transmission . Five-speed Manual Transmission .

1.63k views • 3 slides