'Fea analysis' presentation slideshows

444 views • 33 slides

Acknowledgements

Acknowledgements. Deming Shu, APS Tom Rebedeue, SSRL. Canadian Light Source Front Ends. D.T. Jiang and E. Hallin, CLS, Saskatoon, Canada Outline Generic Specs of CLS Front Ends Type of SR Sources SR Thermal Power Loads FE Layouts: Two-ID/Straight, One-ID/Straight, BM SR Ray Tracing

401 views • 26 slides

FEA

FEA. Reference Guide See additional material here. Setting Up. Make Part or Product Assign Material Properties Ideally done during part creation Can be done in Generative Structural Analysis workbench Needed for FEA Analysis. Mesh. Divides up the part to perform analysis

347 views • 22 slides

FINAL PRESENTATION UNIVERSITY OF CINCINNATI MUTHAR AL-UBAIDI, PHD 04/20/17

FINAL PRESENTATION UNIVERSITY OF CINCINNATI MUTHAR AL-UBAIDI, PHD 04/20/17. Agenda. Team Introductions Problem Statement Project Objectives Design and FEA Analysis Fabrication Hydraulic Circuit Hydraulic Components Fabrication Testing Cost Analysis Lessons Learned Conclusion.

228 views • 22 slides

The Art of Matrix Reduction

The Art of Matrix Reduction. How to create a super-element matrix in ANSYS. ME 501 Project Michael Tonks Alan Mortensen. Summary. Background Matrix Reduction Substructure Analysis Creating Super Elements in Ansys Leading Edge Example Conclusions. FEA Difficulties.

329 views • 18 slides

525 views • 16 slides

BIKE FEA

BIKE FEA. ME272 Professor Jose Granda By Zhiyu Gao Peter Nguyen. Objective. Solid model from solidworks Exporting from Solidworks as *.IGS and *.STEP Import to Nastran 4D

488 views • 15 slides

Wireless Temperature Sensor

Wireless Temperature Sensor. Detail Design Review. Bill of materials Electrical Schematic Programming Circuit Schematic PCB Board Test Stand Test Drawing Theoretical Results Fabrication Timeline. Outline. Bill of Materials. Circuit Schematic. Programming.

349 views • 14 slides

Remington 700 Modeling and Barrel Pressure FEA Analysis

Nathan Petersen Tyler Marines. Remington 700 Modeling and Barrel Pressure FEA Analysis. Objective/Starting Point. Our goal was to understand the stresses that a rifle barrel undergoes when firing a round.

166 views • 6 slides

Remington 700 Modeling and Barrel Pressure FEA Analysis

Nathan Petersen Tyler Marines. Remington 700 Modeling and Barrel Pressure FEA Analysis. Objective/Starting Point. Our goal was to understand the stresses that a rifle barrel undergoes when firing a round.

66 views • 6 slides

Wind Energy Collection to Energy Bank (WECEB)

Wind Energy Collection to Energy Bank (WECEB). P12401 2011-1/2011-2. Vince Burolla (Team Guide) Dr. Edward Hensel and RIT ME Dept. (Sponsor/Customer). Team Members

100 views • 1 slides

Potential Route GCSE Product Design A Level Product Design Resistant Materials

243 views • 1 slides